FCC ID PPQ-PLAYFIR1
Play-Fi Receiver
by LITE-ON Technology Corp.
Grantee Code: PPQ Product Code: PLAYFIR1
Latest application date: 2012-07-15
FCC ID Device Details
| FCC ID | PPQ-PLAYFIR1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | PPQ |
| Product Code | PLAYFIR1 |
| Applicant Business | LITE-ON Technology Corp. 🇹🇼 |
| Related Domains | |
| Equipment Class | Play-Fi Receiver |
| Test Firm | Quie Tek Corporation |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2012-07-15 |
| 2402-2480 MHz | Original Equipment | 2012-07-15 |
Exhibits
Application Information
| Application ID | luQr0VzWeiLwJZn/fyzWEw== |
|---|---|
| Final Action Date | 2012-07-15 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0014765044 |
| Model | -PLAYFIR1 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Play-Fi Receiver |
| Responsible Party | TC Wu, Deputy Director(R & D Division), tc.wu@liteon.com |
| Technical Contact | Sabina Chen, QuieTek Corporation, sabinachen@quietek.com |
| Test Firm | Sky Hsu, Quie Tek Corporation, skyhsu@quietek.com |
| TCB Email | hotline@acbcert.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains Bluetooth transmitter. This device has a 20 MHz and 40 MHz bandwidth mode. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| luQr0VzWeiLwJZn/fyzWEw== | 2012-07-15 | Original Equipment |
| ZAr3oWhCIvEjPTIZ1eqG0g== | 2012-07-15 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application ZAr3oWhCIvEjPTIZ1eqG0g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/15/2012 Application Dated: 07/06/2012 |
| LITE-ON Technology Corp. |
| Bldg. C, 90, Chien 1 Rd., Chung-Ho, |
| New Taipei City,, 23585 Taiwan |
| Attention: TC Wu , Deputy Director(R & D Division) |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPQ-PLAYFIR1 |
| Name of Grantee: | LITE-ON Technology Corp. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Play-Fi Receiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0032 |
| Power Output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains 2.4G WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ZAr3oWhCIvEjPTIZ1eqG0g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LITE-ON Technology Corp. Bldg. C, 90, Chien 1 Rd., Chung-Ho, New Taipei City,, 23585 Taiwan |
Date of Grant: 07/15/2012 Application Dated: 07/06/2012 |
| Attention: TC Wu , Deputy Director(R & D Division) |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPQ-PLAYFIR1 |
| Name of Grantee: | LITE-ON Technology Corp. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Play-Fi Receiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0032 |
| Power Output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains 2.4G WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/15/2012 Application Dated: 07/06/2012 |
| LITE-ON Technology Corp. |
| Bldg. C, 90, Chien 1 Rd., Chung-Ho, |
| New Taipei City,, 23585 Taiwan |
| Attention: TC Wu , Deputy Director(R & D Division) |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPQ-PLAYFIR1 |
| Name of Grantee: | LITE-ON Technology Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | Play-Fi Receiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.089 |
| Power Output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains Bluetooth transmitter. This device has a 20 MHz and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application luQr0VzWeiLwJZn/fyzWEw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LITE-ON Technology Corp. Bldg. C, 90, Chien 1 Rd., Chung-Ho, New Taipei City,, 23585 Taiwan |
Date of Grant: 07/15/2012 Application Dated: 07/06/2012 |
| Attention: TC Wu , Deputy Director(R & D Division) |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPQ-PLAYFIR1 |
| Name of Grantee: | LITE-ON Technology Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | Play-Fi Receiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.089 |
| Power Output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains Bluetooth transmitter. This device has a 20 MHz and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |