FCC ID PPQ-WCBN4606L

802.11b/g/n 2Tx2R + BT5.0 USB WLAN Module

by LITE-ON TECHNOLOGY CORP.

Grantee Code: PPQ   Product Code: WCBN4606L
Latest application date: 2020-02-09

FCC ID Device Details

FCC IDPPQ-WCBN4606L
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePPQ
Product CodeWCBN4606L
Applicant BusinessLITE-ON TECHNOLOGY CORP. 🇹🇼
Related Domains liteon.com cerpass.com.tw
Equipment Class802.11b/g/n 2Tx2R + BT5.0 USB WLAN Module
Test FirmCerpass technology corporation Test Laboratory

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2020-02-09
2402-2480 MHzOriginal Equipment2020-02-09

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2020-02-09PDF 1.1 MB
Internal PhotosInternal Photos2020-02-09PDF 143.1 KB
External PhotosExternal Photos2020-02-09PDF 989.3 KB
ID Label/Location InfoID Label/Location Info2020-02-09PDF 398.1 KB
Test Setup Photos_DTSTest Setup Photos2020-02-09PDF 244.3 KB
DTS Test Report_WifiTest Report2020-02-09PDF 3.1 MB
DTS test report_BLETest Report2020-02-09PDF 2.1 MB
Test Report_DSSTest Report2020-02-09PDF 2.3 MB
Test report_Co-locatedTest Report2020-02-09PDF 1.8 MB
Declaration of authorizationCover Letter(s)2020-02-09PDF 9.9 KB
FCC Modular Approval RequestCover Letter(s)2020-02-09PDF 23.1 KB
confidentialityCover Letter(s)2020-02-09PDF 12.8 KB
MPE ReportRF Exposure Info2020-02-09PDF 129.4 KB
MPE Report_BLERF Exposure Info2020-02-09PDF 63.9 KB
MPE Report_WifiRF Exposure Info2020-02-09PDF 64.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 104.1 KB
Schematics Metadata onlySchematicsPDF 175 KB
Operational Description Metadata onlyOperational DescriptionPDF 1,022.7 KB

Application Information

Application IDyWU9cJh1bxSgqSQX9sWxbw==
Final Action Date2020-02-09
Application PurposeOriginal Equipment
Applicant FRN0014765044
ModelWCBN4606L
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device Description802.11b/g/n 2Tx2R + BT5.0 USB WLAN Module
Responsible PartyTC Wu, Deputy Director(R & D Division), tc.wu@liteon.com , 86-2222-6181
AgentDelia Delia Delia, Cerpass Technology Corporation, deliaf@cerpass.com.tw , 886-3-3226-888
Technical ContactTC Wu, LITE-ON Technology Corp., tc.wu@liteon.com , 86-2222-6181
Non-Technical ContactDelia Feng, Cerpass Technology Corporation, deliaf@cerpass.com.tw , 886-3-3226-888
Test FirmBen Wang, Cerpass technology corporation Test Laboratory, benw@cerpass.com.tw , +886-3-3226888
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
yWU9cJh1bxSgqSQX9sWxbw==2020-02-09Original Equipment
afr8ai9+AaEF4Qt7KfFzAw==2020-02-09Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.002715C
2402-2480 MHz0.004900015C
2412-2462 MHz0.2815C

Grants

TCB Grant - Application yWU9cJh1bxSgqSQX9sWxbw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 02/09/2020

Application Dated: 02/07/2020
LITE-ON TECHNOLOGY CORP.
Bldg. C, 90, Chien 1 Rd., Chung-Ho,
New Taipei City,, 23585
Taiwan
 
Attention: TC Wu , Deputy Director(R & D Division)

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PPQ-WCBN4606L
Name of Grantee:  LITE-ON TECHNOLOGY CORP.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11b/g/n 2Tx2R + BT5.0 USB WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0049  

Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application yWU9cJh1bxSgqSQX9sWxbw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LITE-ON TECHNOLOGY CORP.
Bldg. C, 90, Chien 1 Rd., Chung-Ho,
New Taipei City,, 23585
Taiwan
  Date of Grant: 02/09/2020

Application Dated: 02/07/2020
 
Attention: TC Wu , Deputy Director(R & D Division)

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PPQ-WCBN4606L
Name of Grantee:  LITE-ON TECHNOLOGY CORP.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11b/g/n 2Tx2R + BT5.0 USB WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0049  

Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application afr8ai9+AaEF4Qt7KfFzAw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 02/09/2020

Application Dated: 02/07/2020
LITE-ON TECHNOLOGY CORP.
Bldg. C, 90, Chien 1 Rd., Chung-Ho,
New Taipei City,, 23585
Taiwan
 
Attention: TC Wu , Deputy Director(R & D Division)

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PPQ-WCBN4606L
Name of Grantee:  LITE-ON TECHNOLOGY CORP.
Equipment Class: Digital Transmission System
Notes: 802.11b/g/n 2Tx2R + BT5.0 USB WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0027  
15C 2412.0  -  2462.0 0.28  

Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports 20/40 MHz Bandwidth modes

EAS Grant - Application afr8ai9+AaEF4Qt7KfFzAw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LITE-ON TECHNOLOGY CORP.
Bldg. C, 90, Chien 1 Rd., Chung-Ho,
New Taipei City,, 23585
Taiwan
  Date of Grant: 02/09/2020

Application Dated: 02/07/2020
 
Attention: TC Wu , Deputy Director(R & D Division)

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PPQ-WCBN4606L
Name of Grantee:  LITE-ON TECHNOLOGY CORP.
Equipment Class: Digital Transmission System
Notes: 802.11b/g/n 2Tx2R + BT5.0 USB WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0027  
15C 2412.0  -  2462.0 0.28  

Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports 20/40 MHz Bandwidth modes



Mail To: