FCC ID PPQ-WN3501M

802.11n Dual Band Wireless Lan Module

by LITE-ON TECHNOLOGY CORP.

Grantee Code: PPQ   Product Code: WN3501M
Latest application date: 2019-02-11

Device Images

FCC ID Device Details

FCC IDPPQ-WN3501M
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePPQ
Product CodeWN3501M
Applicant BusinessLITE-ON TECHNOLOGY CORP. 🇹🇼
Related Domains liteon.com sporton.com.tw
Equipment Class802.11n Dual Band Wireless Lan Module
Test FirmSPORTON International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2019-02-11
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-02-11
5180-5240 MHzOriginal Equipment2017-01-03
2412-2462 MHzOriginal Equipment2017-01-03

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2017-01-03PDF 871.9 KB
Internal PhotosInternal Photos2019-02-11PDF 183.5 KB
Internal PhotosInternal Photos2017-01-03PDF 239.8 KB
External PhotosExternal Photos2019-02-11PDF 279.8 KB
External PhotosExternal Photos2017-01-03PDF 142.3 KB
ID Label/Location InfoID Label/Location Info2017-01-03PDF 87.1 KB
Test Setup Photos_DTSTest Setup Photos2019-02-11PDF 204.7 KB
Test Setup Photos_NIITest Setup Photos2019-02-11PDF 132 KB
Test Setup PhotosTest Setup Photos2017-01-03PDF 338.8 KB
Test Setup Photos_DFSTest Setup Photos2017-01-03PDF 91.6 KB
Test Report_DTSTest Report2019-02-11PDF 1.7 MB
Test Report_NIITest Report2019-02-11PDF 465.2 KB
Test Report_DFSTest Report2017-01-03PDF 1.1 MB
Test Report_DTSTest Report2017-01-03PDF 1.9 MB
Test Report_NIITest Report2017-01-03PDF 3.7 MB
C2PC letterCover Letter(s)2019-02-11PDF 48.1 KB
POACover Letter(s)2019-02-11PDF 45.2 KB
confidentialityCover Letter(s)2019-02-11PDF 50.6 KB
Confidential LetterCover Letter(s)2017-01-03PDF 67.3 KB
Module Approval LetterCover Letter(s)2017-01-03PDF 51.9 KB
POACover Letter(s)2017-01-03PDF 63.1 KB
TPC declaration letterCover Letter(s)2017-01-03PDF 64.9 KB
MPE ReportRF Exposure Info2019-02-11PDF 225 KB
MPERF Exposure Info2017-01-03PDF 339.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 82.1 KB
Schematics Metadata onlySchematicsPDF 158.7 KB
Schematics Metadata onlySchematicsPDF 130.4 KB
Operational Description Metadata onlyOperational DescriptionPDF 65.3 KB
Software Security Requirements Metadata onlyOperational DescriptionPDF 60.5 KB

Application Information

Application IDy/crRk0M1iQaV+EBTgGtBA==
Final Action Date2019-02-11
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0014765044
ModelWN3501M
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11n Dual Band Wireless Lan Module
Responsible PartyTC Wu, Deputy Director(R & D Division), tc.wu@liteon.com , 86-2222-6181
AgentLeo Leo Leo, Sporton International Inc., leohuang@sporton.com.tw , 886-3-656-9065
Technical ContactElsa Lin, Sporton International Inc., elsalin@sporton.com.tw , 886-3-656-9065
Non-Technical ContactElsa Lin, Sporton International Inc., elsalin@sporton.com.tw , 886-3-656-9065
Test FirmSharon Jiang, SPORTON International Inc., sharonjiang@sporton.com.tw , 886-3-656-9065
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change: Change the power source from 3.3v to 1.8v and FFC connector. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.

Applications

Application IDDatePurpose
y/crRk0M1iQaV+EBTgGtBA==2019-02-11Class II permissive change or modification of presently authorized equipment
mg77kQSE86hkwwKNtOc59g==2019-02-11Class II permissive change or modification of presently authorized equipment
71PYF6oOwUGWgKS1BNhl1A==2017-01-03Original Equipment
2j4NnhIVQmRGFf9D0EVuQg==2017-01-03Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.058000015CCC
5180-5240 MHz0.03515ECC
5260-5320 MHz0.04515ECC, ND
5500-5700 MHz0.06215ECC, ND
5745-5825 MHz0.04615ECC

Grants

TCB Grant - Application y/crRk0M1iQaV+EBTgGtBA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 02/11/2019

Application Dated: 02/11/2019
LITE-ON TECHNOLOGY CORP.
Bldg. C, 90, Chien 1 Rd., Chung-Ho,
New Taipei City,, 23585
Taiwan
 
Attention: TC Wu , Deputy Director(R & D Division)

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PPQ-WN3501M
Name of Grantee:  LITE-ON TECHNOLOGY CORP.
Equipment Class: Digital Transmission System
Notes: 802.11n Dual Band Wireless Lan Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.058  

Class II Permissive Change: Change the power source from 3.3v to 1.8v and FFC connector.

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application y/crRk0M1iQaV+EBTgGtBA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LITE-ON TECHNOLOGY CORP.
Bldg. C, 90, Chien 1 Rd., Chung-Ho,
New Taipei City,, 23585
Taiwan
  Date of Grant: 02/11/2019

Application Dated: 02/11/2019
 
Attention: TC Wu , Deputy Director(R & D Division)

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PPQ-WN3501M
Name of Grantee:  LITE-ON TECHNOLOGY CORP.
Equipment Class: Digital Transmission System
Notes: 802.11n Dual Band Wireless Lan Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.058  

Class II Permissive Change: Change the power source from 3.3v to 1.8v and FFC connector.

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application mg77kQSE86hkwwKNtOc59g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 02/11/2019

Application Dated: 02/11/2019
LITE-ON TECHNOLOGY CORP.
Bldg. C, 90, Chien 1 Rd., Chung-Ho,
New Taipei City,, 23585
Taiwan
 
Attention: TC Wu , Deputy Director(R & D Division)

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PPQ-WN3501M
Name of Grantee:  LITE-ON TECHNOLOGY CORP.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11n Dual Band Wireless Lan Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.035  
CC ND 15E 5260.0  -  5320.0 0.045  
CC ND 15E 5500.0  -  5700.0 0.062  
CC 15E 5745.0  -  5825.0 0.046  

Class II Permissive Change: Change the power source from 3.3v to 1.8v and FFC connector.

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application mg77kQSE86hkwwKNtOc59g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LITE-ON TECHNOLOGY CORP.
Bldg. C, 90, Chien 1 Rd., Chung-Ho,
New Taipei City,, 23585
Taiwan
  Date of Grant: 02/11/2019

Application Dated: 02/11/2019
 
Attention: TC Wu , Deputy Director(R & D Division)

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PPQ-WN3501M
Name of Grantee:  LITE-ON TECHNOLOGY CORP.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11n Dual Band Wireless Lan Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.035  
CC ND 15E 5260.0  -  5320.0 0.045  
CC ND 15E 5500.0  -  5700.0 0.062  
CC 15E 5745.0  -  5825.0 0.046  

Class II Permissive Change: Change the power source from 3.3v to 1.8v and FFC connector.

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 71PYF6oOwUGWgKS1BNhl1A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 01/03/2017

Application Dated: 12/29/2016
LITE-ON TECHNOLOGY CORP.
Bldg. C, 90, Chien 1 Rd., Chung-Ho,
New Taipei City,, 23585
Taiwan
 
Attention: TC Wu , Deputy Director(R & D Division)

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PPQ-WN3501M
Name of Grantee:  LITE-ON TECHNOLOGY CORP.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Dual Band Wireless Lan Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.035  
CC ND 15E 5260.0  -  5320.0 0.045  
CC ND 15E 5500.0  -  5700.0 0.062  
CC 15E 5745.0  -  5825.0 0.046  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application 71PYF6oOwUGWgKS1BNhl1A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LITE-ON TECHNOLOGY CORP.
Bldg. C, 90, Chien 1 Rd., Chung-Ho,
New Taipei City,, 23585
Taiwan
  Date of Grant: 01/03/2017

Application Dated: 12/29/2016
 
Attention: TC Wu , Deputy Director(R & D Division)

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PPQ-WN3501M
Name of Grantee:  LITE-ON TECHNOLOGY CORP.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Dual Band Wireless Lan Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.035  
CC ND 15E 5260.0  -  5320.0 0.045  
CC ND 15E 5500.0  -  5700.0 0.062  
CC 15E 5745.0  -  5825.0 0.046  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 2j4NnhIVQmRGFf9D0EVuQg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 01/03/2017

Application Dated: 12/29/2016
LITE-ON TECHNOLOGY CORP.
Bldg. C, 90, Chien 1 Rd., Chung-Ho,
New Taipei City,, 23585
Taiwan
 
Attention: TC Wu , Deputy Director(R & D Division)

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PPQ-WN3501M
Name of Grantee:  LITE-ON TECHNOLOGY CORP.
Equipment Class: Digital Transmission System
Notes: Dual Band Wireless Lan Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.058  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 2j4NnhIVQmRGFf9D0EVuQg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LITE-ON TECHNOLOGY CORP.
Bldg. C, 90, Chien 1 Rd., Chung-Ho,
New Taipei City,, 23585
Taiwan
  Date of Grant: 01/03/2017

Application Dated: 12/29/2016
 
Attention: TC Wu , Deputy Director(R & D Division)

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PPQ-WN3501M
Name of Grantee:  LITE-ON TECHNOLOGY CORP.
Equipment Class: Digital Transmission System
Notes: Dual Band Wireless Lan Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.058  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: