FCC ID PPQ-WN4508R

802.11a/b/g/n 2T2R Wireless Lan USB Module

by LITE-ON Technology Corp.

Grantee Code: PPQ   Product Code: WN4508R
Latest application date: 2013-11-07

FCC ID Device Details

FCC IDPPQ-WN4508R
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePPQ
Product CodeWN4508R
Applicant BusinessLITE-ON Technology Corp. 🇹🇼
Related Domains liteon.com
Equipment Class802.11a/b/g/n 2T2R Wireless Lan USB Module
Test FirmQuie Tek Corporation

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2013-11-07
5180-5240 MHzOriginal Equipment2013-11-07

Exhibits

DocumentTypeAvailableFile
(WN4508R) UserManUsers Manual2013-11-07PDF 791.1 KB
(WN4508R) InphoInternal Photos2013-11-07PDF 661.2 KB
(WN4508R) ExphoExternal Photos2013-11-07PDF 186.4 KB
(WN4508R) LabelLocID Label/Location Info2013-11-07PDF 124.3 KB
(WN4508R) LabelSmpl_20131104ID Label/Location Info2013-11-07PDF 43.4 KB
(WN4508R) TsupTest Setup Photos2013-11-07PDF 257.8 KB
(WN4508R) TestRpt-DFSTest Report2013-11-07PDF 478.9 KB
(WN4508R) TestRpt-Part 15C_Part 1Test Report2013-11-07PDF 4.4 MB
(WN4508R) TestRpt-Part 15C_Part 2Test Report2013-11-07PDF 4.6 MB
(WN4508R) TestRpt-Part 15C_Part 3Test Report2013-11-07PDF 2.8 MB
(WN4508R) TestRpt-Part 15E_Part 1Test Report2013-11-07PDF 4.4 MB
(WN4508R) TestRpt-Part 15E_Part 2Test Report2013-11-07PDF 4.6 MB
(WN4508R) TestRpt-Part 15E_Part 3Test Report2013-11-07PDF 4.5 MB
(WN4508R) TestRpt-Part 15E_Part 4Test Report2013-11-07PDF 1.8 MB
(WN4508R) ATTESTATIONCover Letter(s)2013-11-07PDF 10.3 KB
(WN4508R) About WiFi Channels 12 13 Declaration letterCover Letter(s)2013-11-07PDF 213.6 KB
(WN4508R) ConfidentialityCover Letter(s)2013-11-07PDF 81 KB
(WN4508R) DTS-UNII Declaration letterCover Letter(s)2013-11-07PDF 54.3 KB
(WN4508R) FCC Modular Approval Request_20131104Cover Letter(s)2013-11-07PDF 13.8 KB
(WN4508R) RF_160_03 Declaration of authorizationCover Letter(s)2013-11-07PDF 124.2 KB
(WN4508R) RFExpRF Exposure Info2013-11-07PDF 36.3 KB

Application Information

Application IDryd2Y8oQDHUYDRcxjzLSNQ==
Final Action Date2013-11-07
Application PurposeOriginal Equipment
Applicant FRN0022158786
Model-WN4508R
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11a/b/g/n 2T2R Wireless Lan USB Module
Responsible PartyTC Wu, Deputy Director(R & D Division), tc.wu@liteon.com , 86-2222-6181
Technical ContactSabina Chen, QuieTek Corporation, sabinachen@quietek.com , 886-2-86013788
Test FirmSky Hsu, Quie Tek Corporation, skyhsu@quietek.com , 886-2-86013788
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Power Output listed is Conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This device has a 20 MHz and 40 MHz Bandwidth and it contains 5G NII WLAN.

Applications

Application IDDatePurpose
ryd2Y8oQDHUYDRcxjzLSNQ==2013-11-07Original Equipment
Lt54DJZlvkuECV1Wa4pKlA==2013-11-07Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.280515CCC, MO
5180-5240 MHz0.048415ECC, MO
5260-5320 MHz0.05215ECC, MO, ND
5500-5700 MHz0.053115ECC, MO, ND
5745-5825 MHz0.30215CCC, MO

Grants

TCB Grant - Application ryd2Y8oQDHUYDRcxjzLSNQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/07/2013

Application Dated: 11/04/2013
LITE-ON Technology Corp.
Bldg. C, 90, Chien 1 Rd., Chung-Ho,
New Taipei City,, 23585
Taiwan
 
Attention: TC Wu , Deputy Director(R & D Division)

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PPQ-WN4508R
Name of Grantee:  LITE-ON Technology Corp.
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n 2T2R Wireless Lan USB Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.2805  
CC MO 15C 5745.0  -  5825.0 0.302  

Single Modular Approval. Power Output listed is Conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

This device has a 20 MHz and 40 MHz Bandwidth and it contains 5G NII WLAN.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application ryd2Y8oQDHUYDRcxjzLSNQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LITE-ON Technology Corp.
Bldg. C, 90, Chien 1 Rd., Chung-Ho,
New Taipei City,, 23585
Taiwan
  Date of Grant: 11/07/2013

Application Dated: 11/04/2013
 
Attention: TC Wu , Deputy Director(R & D Division)

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PPQ-WN4508R
Name of Grantee:  LITE-ON Technology Corp.
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n 2T2R Wireless Lan USB Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.2805  
CC MO 15C 5745.0  -  5825.0 0.302  

Single Modular Approval. Power Output listed is Conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

This device has a 20 MHz and 40 MHz Bandwidth and it contains 5G NII WLAN.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application Lt54DJZlvkuECV1Wa4pKlA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/07/2013

Application Dated: 11/04/2013
LITE-ON Technology Corp.
Bldg. C, 90, Chien 1 Rd., Chung-Ho,
New Taipei City,, 23585
Taiwan
 
Attention: TC Wu , Deputy Director(R & D Division)

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PPQ-WN4508R
Name of Grantee:  LITE-ON Technology Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n 2T2R Wireless Lan USB Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0484  
CC MO ND 15E 5260.0  -  5320.0 0.052  
CC MO ND 15E 5500.0  -  5700.0 0.0531  

Single Modular Approval. Power Output listed is Conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

This device has a 20 MHz and 40 MHz Bandwidth and it contains 2.4G WLAN.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application Lt54DJZlvkuECV1Wa4pKlA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LITE-ON Technology Corp.
Bldg. C, 90, Chien 1 Rd., Chung-Ho,
New Taipei City,, 23585
Taiwan
  Date of Grant: 11/07/2013

Application Dated: 11/04/2013
 
Attention: TC Wu , Deputy Director(R & D Division)

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PPQ-WN4508R
Name of Grantee:  LITE-ON Technology Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n 2T2R Wireless Lan USB Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0484  
CC MO ND 15E 5260.0  -  5320.0 0.052  
CC MO ND 15E 5500.0  -  5700.0 0.0531  

Single Modular Approval. Power Output listed is Conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

This device has a 20 MHz and 40 MHz Bandwidth and it contains 2.4G WLAN.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: