FCC ID PQC-MDL4851

2.4GHz RADIO MODULE

by Philips Medical Systems North America Co.

Grantee Code: PQC   Product Code: MDL4851
Latest application date: 2007-08-13

FCC ID Device Details

FCC IDPQC-MDL4851
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePQC
Product CodeMDL4851
Applicant BusinessPhilips Medical Systems North America Co. 🇺🇸
Related Domains philips.com
Equipment Class2.4GHz RADIO MODULE
Test FirmCompliance Worldwide, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2401.056-2482.272 MHzClass II permissive change or modification of presently authorized equipment2007-08-13
2401.056-2482.272 MHzClass II permissive change or modification of presently authorized equipment2007-07-20
2401.056-2482.272 MHzOriginal Equipment2007-03-23

Exhibits

DocumentTypeAvailableFile
USERS MANUALUsers Manual2007-08-13PDF 702.9 KB
USERS MANUALUsers Manual2007-07-20PDF 146.7 KB
Users ManualUsers Manual2007-05-07PDF 151.6 KB
Internal PhotosInternal Photos2007-05-07PDF 1.1 MB
External PhotosExternal Photos2007-05-07PDF 1.1 MB
Part 15 Test Report - with External Photos in Test SetupTest Setup Photos2007-05-07PDF 1,012.4 KB
Reply to correspondence 32270 and 32271 - with External PhotosExternal Photos2007-05-07PDF 2.1 MB
Reply to correspondence 32270 and 32271 - External Photos separatedCover Letter(s)2007-03-23PDF 774.1 KB
ID LABEL LOCATIONID Label/Location Info2007-07-20PDF 179.7 KB
LABEL SAMPLEID Label/Location Info2007-07-20PDF 313.6 KB
FCC ID Label and Location InfoID Label/Location Info2007-03-23PDF 174.4 KB
TEST SETUP PHOTOSTest Setup Photos2007-08-13PDF 292.4 KB
TEST SETUP PHOTOSTest Setup Photos2007-07-20PDF 962.7 KB
Test Setup PhotosTest Setup Photos2007-05-07PDF 1.6 MB
Part 15 Test Report - Test Setup Photos separatedTest Report2007-03-23PDF 840.9 KB
TEST REPORTTest Report2007-08-13PDF 1.5 MB
TEST REPORTTest Report2007-07-20PDF 1.2 MB
CONFIDENTIALITY REQUESTCover Letter(s)2007-08-13PDF 107.8 KB
COVER LETTERCover Letter(s)2007-08-13PDF 40.3 KB
TRIBAND CHANGE CONDUCT OUTPUTCover Letter(s)2007-08-13PDF 27.4 KB
CONFIDENTIALITY REQUESTCover Letter(s)2007-07-20PDF 154.4 KB
COVER LETTERCover Letter(s)2007-07-20PDF 135 KB
Addendum to Request for ConfidentialityCover Letter(s)2007-03-23PDF 31.5 KB
Cover LetterCover Letter(s)2007-03-23PDF 43.1 KB
Request for ConfidentialityCover Letter(s)2007-03-23PDF 45.4 KB
RF Exposure InfoRF Exposure Info2007-03-23PDF 95.5 KB

Application Information

Application IDfE3jgtnXubpujp7Pe0HiYA==
Final Action Date2007-08-13
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0004980637
Model-MDL4851
Frequency Range2401.056-2482.272 MHz
Equipment ClassDTS - Digital Transmission System
Device Description2.4GHz RADIO MODULE
Responsible PartyDelroy Smith, Principal Scientist / Project Leader, delroy.smith@philips.com , + 1 978 659 3382
Test FirmLarry Stillings, Compliance Worldwide, Inc., LStillings@cw-inc.com , 603-887-3903
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsCLASS II CHANGE: This Class II change adds an alternate antenna model M8100-66490. Maximum peak conducted power was measured at 0.166W. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, must not be co-located or operating in conjunction with any other antenna or transmitter, and must not exceed an antenna gain of 2 dBi. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. CLASS II CHANGE: This Class II change adds alternate antenna model M3002-66493.

Applications

Application IDDatePurpose
fE3jgtnXubpujp7Pe0HiYA==2007-08-13Class II permissive change or modification of presently authorized equipment
n9TBiTQ/FPDCF3iZjjYYSg==2007-07-20Class II permissive change or modification of presently authorized equipment
aZoBr1pk1n265grGxpCXZA==2007-03-23Original Equipment

Equipment Authorization

FrequencyOutputRules
2401.056-2482.272 MHz0.050000015C
2401.056-2482.272 MHz0.166000015C

Grants

TCB Grant - Application n9TBiTQ/FPDCF3iZjjYYSg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 07/20/2007

Application Dated: 07/16/2007
Philips Medical Systems North America Co.
3000 Minuteman Road
Andover, MA 01810-1099
 
Attention: Delroy Smith , Principal Scientist / Project Leader

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PQC-MDL4851
Name of Grantee:  Philips Medical Systems North America Co.
Equipment Class: Digital Transmission System
Notes: 2.4 GHz RADIO MODULE
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2401.056  -  2482.272 0.166  

CLASS II CHANGE: This Class II change adds an alternate antenna model M8100-66490. Maximum peak conducted power was measured at 0.166W. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, must not be co-located or operating in conjunction with any other antenna or transmitter, and must not exceed an antenna gain of 2 dBi. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application n9TBiTQ/FPDCF3iZjjYYSg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Philips Medical Systems North America Co.
3000 Minuteman Road
Andover, MA 01810-1099
United States
  Date of Grant: 07/20/2007

Application Dated: 07/16/2007
 
Attention: Delroy Smith , Principal Scientist / Project Leader

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PQC-MDL4851
Name of Grantee:  Philips Medical Systems North America Co.
Equipment Class: Digital Transmission System
Notes: 2.4 GHz RADIO MODULE
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2401.056  -  2482.272 0.166  

CLASS II CHANGE: This Class II change adds an alternate antenna model M8100-66490. Maximum peak conducted power was measured at 0.166W. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, must not be co-located or operating in conjunction with any other antenna or transmitter, and must not exceed an antenna gain of 2 dBi. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To:


EA767444

TCB Grant - Application fE3jgtnXubpujp7Pe0HiYA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 08/13/2007

Application Dated: 08/10/2007
Philips Medical Systems North America Co.
3000 Minuteman Road
Andover, MA 01810-1099
 
Attention: Delroy Smith , Principal Scientist / Project Leader

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PQC-MDL4851
Name of Grantee:  Philips Medical Systems North America Co.
Equipment Class: Digital Transmission System
Notes: 2.4GHz RADIO MODULE
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2401.056  -  2482.272 0.166  

CLASS II CHANGE: This Class II change adds an alternate antenna model M8100-66490. Maximum peak conducted power was measured at 0.166W. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, must not be co-located or operating in conjunction with any other antenna or transmitter, and must not exceed an antenna gain of 2 dBi. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CLASS II CHANGE: This Class II change adds alternate antenna model M3002-66493.


EAS Grant - Application fE3jgtnXubpujp7Pe0HiYA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Philips Medical Systems North America Co.
3000 Minuteman Road
Andover, MA 01810-1099
United States
  Date of Grant: 08/13/2007

Application Dated: 08/10/2007
 
Attention: Delroy Smith , Principal Scientist / Project Leader

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PQC-MDL4851
Name of Grantee:  Philips Medical Systems North America Co.
Equipment Class: Digital Transmission System
Notes: 2.4GHz RADIO MODULE
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2401.056  -  2482.272 0.166  

CLASS II CHANGE: This Class II change adds an alternate antenna model M8100-66490. Maximum peak conducted power was measured at 0.166W. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, must not be co-located or operating in conjunction with any other antenna or transmitter, and must not exceed an antenna gain of 2 dBi. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CLASS II CHANGE: This Class II change adds alternate antenna model M3002-66493.



Mail To:


EA862039

TCB Grant - Application aZoBr1pk1n265grGxpCXZA==

This application does not exist.

EAS Grant - Application aZoBr1pk1n265grGxpCXZA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Philips Medical Systems North America Co.
3000 Minuteman Road
Andover, MA 01810-1099
United States
  Date of Grant: 03/23/2007

Application Dated: 11/22/2006
 
Attention: Delroy Smith , Principal Scientist / Project Leader

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PQC-MDL4851
Name of Grantee:  Philips Medical Systems North America Co.
Equipment Class: Digital Transmission System
Notes: 2.4 GHz Radio Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2401.056  -  2482.272 0.05  



Mail To:
Barry Wyshogrod, Regulatory Engineer
Philips Medical Systems
3000 Minuteman Road Mailstop 0480
Andover, MA 01810