FCC ID PQC-MX40WL3
SDIO Wireless Module
by Philips Medical Systems North America Co.
Grantee Code: PQC Product Code: MX40WL3
Latest application date: 2015-12-24
Device Images
FCC ID Device Details
| FCC ID | PQC-MX40WL3 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | PQC |
| Product Code | MX40WL3 |
| Applicant Business | Philips Medical Systems North America Co. 🇺🇸 |
| Related Domains |  philips.com |
| Equipment Class | SDIO Wireless Module |
| Test Firm | Bureau Veritas Consumer Products Services, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2015-12-24 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2015-12-24 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2015-06-30 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2015-03-10 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2015-03-10 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAN Grant Date: 11/14/2014 | 2015-03-02 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAN Grant Date: 08/20/2012 | 2015-03-02 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAN Grant Date: 11/14/2014 | 2015-03-02 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2015-03-02 | PDF 219.6 KB |
| Internal Photos | Internal Photos | 2015-12-24 | PDF 228.7 KB |
| Internal Photos | Internal Photos | 2015-03-10 | PDF 551.2 KB |
| External Photos | External Photos | 2015-12-24 | PDF 504.2 KB |
| Host External Photos | External Photos | 2015-12-24 | PDF 504.2 KB |
| External Photos | External Photos | 2015-03-10 | PDF 329.7 KB |
| EUT Photos | External Photos | 2015-03-02 | PDF 629.2 KB |
| Label & Location | ID Label/Location Info | 2015-03-02 | PDF 169.6 KB |
| Test Setup Photos | Test Setup Photos | 2015-12-24 | PDF 388.8 KB |
| Test setup photo | Test Setup Photos | 2015-12-24 | PDF 388.8 KB |
| Test Setup Photos | Test Setup Photos | 2015-06-30 | PDF 216.9 KB |
| Test Setup Photos | Test Setup Photos | 2015-03-10 | PDF 445.9 KB |
| SAR Test Report part 1 | RF Exposure Info | 2015-12-24 | PDF 4.8 MB |
| SAR Test Report part 2 | RF Exposure Info | 2015-12-24 | PDF 4.6 MB |
| Test Report | Test Report | 2015-06-30 | PDF 2 MB |
| DTS Test Report | Test Report | 2015-03-10 | PDF 1.5 MB |
| Test Report Metadata only | Test Report | 2015-03-10 | PDF 1.3 MB |
| Test Report Metadata only | Test Report | 2015-03-10 | PDF 1.3 MB |
| UNII Test Report | Test Report | 2015-03-10 | PDF 1.5 MB |
| Permissive Change Request Letter | Cover Letter(s) | 2015-12-24 | PDF 50.1 KB |
| Product Certification Rep Auth Letter | Cover Letter(s) | 2015-12-24 | PDF 60.1 KB |
| Authorization Letter | Cover Letter(s) | 2015-06-30 | PDF 66.1 KB |
| C2PC clarification letter | Cover Letter(s) | 2015-06-30 | PDF 72.5 KB |
| Permissive Change letter | Cover Letter(s) | 2015-06-30 | PDF 54 KB |
| Authorization Letter | Cover Letter(s) | 2015-03-10 | PDF 34.4 KB |
| Permissive Change Request Letter | Cover Letter(s) | 2015-03-10 | PDF 149.7 KB |
| Supercede Request Letter | Cover Letter(s) | 2015-03-10 | PDF 42.4 KB |
| Authorization Letter | Cover Letter(s) | 2015-03-02 | PDF 64.2 KB |
| Authorization Letter from original applicant | Cover Letter(s) | 2015-03-02 | PDF 179 KB |
| Change of ID Letter | Cover Letter(s) | 2015-03-02 | PDF 67.3 KB |
| MPE Calculation | RF Exposure Info | 2015-06-30 | PDF 83.3 KB |
| MPE Calculation | RF Exposure Info | 2015-03-10 | PDF 82.3 KB |
Application Information
| Application ID | zUbRcX82M1DaGR3l0OMVlg== |
|---|---|
| Final Action Date | 2015-12-24 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0017950635 |
| Model | MX40WL3 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | SDIO Wireless Module |
| Responsible Party | Delroy Smith, Principal Scientist / Project Leader, delroy.smith@philips.com , + 1 978 659 3382 |
| Test Firm | Sarb Shelopal, Bureau Veritas Consumer Products Services, Inc., Sarbjit.Shelopal@bureauveritas.com  , +1 925 963 4420 |
| TCB Email | tcb@siemic.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | CIIPC to add RF category Portable SAR results when module is used in Philips portable host (IntelliVue MX4O) with Philips embedded PCB antenna (r0001). The highest reported SAR values found during evaluation is: Body: 1.17 W/kg. BT function is disabled. Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrator and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrator are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrator must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| zUbRcX82M1DaGR3l0OMVlg== | 2015-12-24 | Class II permissive change or modification of presently authorized equipment |
| 1APn6Fdi6PP9G/LRAVeP/g== | 2015-12-24 | Class II permissive change or modification of presently authorized equipment |
| f8PkvjOIW9QbzbF/a07Tew== | 2015-06-30 | Class II permissive change or modification of presently authorized equipment |
| ptw/fOOS+5S0iOxj/aDe8g== | 2015-03-10 | Class II permissive change or modification of presently authorized equipment |
| j8B3Z5CVuj46CpFumxTqQA== | 2015-03-10 | Class II permissive change or modification of presently authorized equipment |
| S6PH5QvPEgKFm/XlNcVSZQ== | 2015-03-02 | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAN Grant Date: 11/14/2014 |
| RjOYnXNpTMyRYnbnopJAAg== | 2015-03-02 | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAN Grant Date: 08/20/2012 |
| QeRxtUkkQy4Dod6dRLbl9w== | 2015-03-02 | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAN Grant Date: 11/14/2014 |
Equipment Authorization
Grants
TCB Grant - Application zUbRcX82M1DaGR3l0OMVlg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 12/24/2015 Application Dated: 12/23/2015 |
| Philips Medical Systems North America Co. |
| 3000 Minuteman Road |
| Andover, MA 01810-1099 |
| Attention: Delroy Smith , Principal Scientist / Project Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQC-MX40WL3 |
| Name of Grantee: | Philips Medical Systems North America Co. |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.173 |
| CIIPC to add RF category Portable SAR results when module is used in Philips portable host (IntelliVue MX4O) with Philips embedded PCB antenna (r0001). The highest reported SAR values found during evaluation is: Body: 1.17 W/kg. BT function is disabled. Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrator and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrator are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrator must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application zUbRcX82M1DaGR3l0OMVlg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Philips Medical Systems North America Co. 3000 Minuteman Road Andover, MA 01810-1099 United States |
Date of Grant: 12/24/2015 Application Dated: 12/23/2015 |
| Attention: Delroy Smith , Principal Scientist / Project Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQC-MX40WL3 |
| Name of Grantee: | Philips Medical Systems North America Co. |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.173 |
| CIIPC to add RF category Portable SAR results when module is used in Philips portable host (IntelliVue MX4O) with Philips embedded PCB antenna (r0001). The highest reported SAR values found during evaluation is: Body: 1.17 W/kg. BT function is disabled. Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrator and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrator are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrator must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 03/02/2015 Application Dated: 03/02/2015 |
| Philips Medical Systems North America Co. |
| 3000 Minuteman Road |
| Andover, MA 01810-1099 |
| Attention: Delroy Smith , Principal Scientist / Project Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQC-MX40WL3 |
| Name of Grantee: | Philips Medical Systems North America Co. |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.173 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0086 |
| Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application S6PH5QvPEgKFm/XlNcVSZQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Philips Medical Systems North America Co. 3000 Minuteman Road Andover, MA 01810-1099 United States |
Date of Grant: 03/02/2015 Application Dated: 03/02/2015 |
| Attention: Delroy Smith , Principal Scientist / Project Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQC-MX40WL3 |
| Name of Grantee: | Philips Medical Systems North America Co. |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.173 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0086 |
| Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 03/02/2015 Application Dated: 03/02/2015 |
| Philips Medical Systems North America Co. |
| 3000 Minuteman Road |
| Andover, MA 01810-1099 |
| Attention: Delroy Smith , Principal Scientist / Project Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQC-MX40WL3 |
| Name of Grantee: | Philips Medical Systems North America Co. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0139 |
| Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application RjOYnXNpTMyRYnbnopJAAg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Philips Medical Systems North America Co. 3000 Minuteman Road Andover, MA 01810-1099 United States |
Date of Grant: 03/02/2015 Application Dated: 03/02/2015 |
| Attention: Delroy Smith , Principal Scientist / Project Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQC-MX40WL3 |
| Name of Grantee: | Philips Medical Systems North America Co. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0139 |
| Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 03/02/2015 Application Dated: 03/02/2015 |
| Philips Medical Systems North America Co. |
| 3000 Minuteman Road |
| Andover, MA 01810-1099 |
| Attention: Delroy Smith , Principal Scientist / Project Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQC-MX40WL3 |
| Name of Grantee: | Philips Medical Systems North America Co. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0247 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0247 | ||
| 38 CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| 38 CC ND | 15E | 5660.0 - 5700.0 | 0.02 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0242 |
| Single Modular Approval for mobile platforms. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured, installed or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application QeRxtUkkQy4Dod6dRLbl9w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Philips Medical Systems North America Co. 3000 Minuteman Road Andover, MA 01810-1099 United States |
Date of Grant: 03/02/2015 Application Dated: 03/02/2015 |
| Attention: Delroy Smith , Principal Scientist / Project Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQC-MX40WL3 |
| Name of Grantee: | Philips Medical Systems North America Co. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0247 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0247 | ||
| 38 CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| 38 CC ND | 15E | 5660.0 - 5700.0 | 0.02 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0242 |
| Single Modular Approval for mobile platforms. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured, installed or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 03/10/2015 Application Dated: 03/09/2015 |
| Philips Medical Systems North America Co. |
| 3000 Minuteman Road |
| Andover, MA 01810-1099 |
| Attention: Delroy Smith , Principal Scientist / Project Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQC-MX40WL3 |
| Name of Grantee: | Philips Medical Systems North America Co. |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.173 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0086 |
| CIIPC to add new antennas (Philips P/N: 453564553001r1444, and 453564252521r1444) and disable BT function. Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ptw/fOOS+5S0iOxj/aDe8g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Philips Medical Systems North America Co. 3000 Minuteman Road Andover, MA 01810-1099 United States |
Date of Grant: 03/10/2015 Application Dated: 03/09/2015 |
| Attention: Delroy Smith , Principal Scientist / Project Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQC-MX40WL3 |
| Name of Grantee: | Philips Medical Systems North America Co. |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.173 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0086 |
| CIIPC to add new antennas (Philips P/N: 453564553001r1444, and 453564252521r1444) and disable BT function. Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 03/10/2015 Application Dated: 03/09/2015 |
| Philips Medical Systems North America Co. |
| 3000 Minuteman Road |
| Andover, MA 01810-1099 |
| Attention: Delroy Smith , Principal Scientist / Project Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQC-MX40WL3 |
| Name of Grantee: | Philips Medical Systems North America Co. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0247 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0247 | ||
| 38 CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| 38 CC ND | 15E | 5660.0 - 5700.0 | 0.02 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0242 |
| CIIPC to add new antennas (Philips P/N: 453564553001r1444, and 453564252521r1444) and disable BT function. Single Modular Approval for mobile platforms. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application j8B3Z5CVuj46CpFumxTqQA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Philips Medical Systems North America Co. 3000 Minuteman Road Andover, MA 01810-1099 United States |
Date of Grant: 03/10/2015 Application Dated: 03/09/2015 |
| Attention: Delroy Smith , Principal Scientist / Project Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQC-MX40WL3 |
| Name of Grantee: | Philips Medical Systems North America Co. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0247 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0247 | ||
| 38 CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| 38 CC ND | 15E | 5660.0 - 5700.0 | 0.02 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0242 |
| CIIPC to add new antennas (Philips P/N: 453564553001r1444, and 453564252521r1444) and disable BT function. Single Modular Approval for mobile platforms. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/30/2015 Application Dated: 06/30/2015 |
| Philips Medical Systems North America Co. |
| 3000 Minuteman Road |
| Andover, MA 01810-1099 |
| Attention: Delroy Smith , Principal Scientist / Project Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQC-MX40WL3 |
| Name of Grantee: | Philips Medical Systems North America Co. |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.173 |
| CIIPC to add new antennas (Philips P/N: 453564553001, and 453564252521) and disable BT function. Increase transmit power for 802.11 g & 802.11 n-HT20. Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application f8PkvjOIW9QbzbF/a07Tew==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Philips Medical Systems North America Co. 3000 Minuteman Road Andover, MA 01810-1099 United States |
Date of Grant: 06/30/2015 Application Dated: 06/30/2015 |
| Attention: Delroy Smith , Principal Scientist / Project Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQC-MX40WL3 |
| Name of Grantee: | Philips Medical Systems North America Co. |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.173 |
| CIIPC to add new antennas (Philips P/N: 453564553001, and 453564252521) and disable BT function. Increase transmit power for 802.11 g & 802.11 n-HT20. Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 12/24/2015 Application Dated: 12/24/2015 |
| Philips Medical Systems North America Co. |
| 3000 Minuteman Road |
| Andover, MA 01810-1099 |
| Attention: Delroy Smith , Principal Scientist / Project Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQC-MX40WL3 |
| Name of Grantee: | Philips Medical Systems North America Co. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0247 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0247 | ||
| 38 CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| 38 CC ND | 15E | 5660.0 - 5700.0 | 0.02 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0242 |
| CIIPC to add RF category Portable SAR results when module is used in Philips portable host (IntelliVue MX4O) with Philips embedded PCB antenna (r0001). The highest reported SAR values found during evaluation is: Body: 1.17 W/kg. BT function is disabled. Single Modular Approval for mobile platforms. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrator and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrator are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 1APn6Fdi6PP9G/LRAVeP/g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Philips Medical Systems North America Co. 3000 Minuteman Road Andover, MA 01810-1099 United States |
Date of Grant: 12/24/2015 Application Dated: 12/24/2015 |
| Attention: Delroy Smith , Principal Scientist / Project Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQC-MX40WL3 |
| Name of Grantee: | Philips Medical Systems North America Co. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0247 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0247 | ||
| 38 CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| 38 CC ND | 15E | 5660.0 - 5700.0 | 0.02 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0242 |
| CIIPC to add RF category Portable SAR results when module is used in Philips portable host (IntelliVue MX4O) with Philips embedded PCB antenna (r0001). The highest reported SAR values found during evaluation is: Body: 1.17 W/kg. BT function is disabled. Single Modular Approval for mobile platforms. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrator and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrator are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |