FCC ID PQG-MERCURY6E-M
UHF RFID Reader Module
by Lyngsoe Systems Ltd.
Grantee Code: PQG Product Code: MERCURY6EM
Latest application date: 2023-10-23
FCC ID Device Details
| FCC ID | PQG-MERCURY6E-M |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | PQG |
| Product Code | MERCURY6EM |
| Applicant Business | Lyngsoe Systems Ltd. 🇨🇦 |
| Related Domains |  lyngsoesystems.com |
| Equipment Class | UHF RFID Reader Module |
| Test Firm | UltraTech Engineering Labs, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.625-921 MHz | Class II permissive change or modification of presently authorized equipment | 2023-10-23 |
| 917.5-922.5 MHz | Change in identification of presently authorized equipment. Original FCC ID: QV5MERCURY6E-M Grant Date: 01/04/2021 | 2023-10-12 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2023-10-23 | PDF 1.9 MB |
| Antenna Photos | External Photos | 2023-10-23 | PDF 282.1 KB |
| External Photos | External Photos | 2023-10-12 | PDF 3.6 MB |
| ID Label and Location Info | ID Label/Location Info | 2023-10-12 | PDF 1.8 MB |
| Antenna Data Sheet | Test Report | 2023-10-23 | PDF 2.5 MB |
| Test Report | Test Report | 2023-10-23 | PDF 727 KB |
| SDoC | Attestation Statements | 2023-10-23 | PDF 141.6 KB |
| Section 2.911(d)(7) Attestation | Attestation Statements | 2023-10-23 | PDF 383.1 KB |
| Sections 2.911(d)(5)(i)-(ii) Attestation | Attestation Statements | 2023-10-23 | PDF 179.9 KB |
| Section 2.911(d)(7) Attestation | Attestation Statements | 2023-10-12 | PDF 382.5 KB |
| Sections 2.911(d)(5)(i)-(ii) Attestation | Attestation Statements | 2023-10-12 | PDF 180.7 KB |
| Agent Authorization | Cover Letter(s) | 2023-10-23 | PDF 149.9 KB |
| C2PC Request | Cover Letter(s) | 2023-10-23 | PDF 312.1 KB |
| Applicant Change in ID Request | Cover Letter(s) | 2023-10-12 | PDF 124.5 KB |
| Original Grantee Authorization | Cover Letter(s) | 2023-10-12 | PDF 54.4 KB |
| MPE Evaluation | RF Exposure Info | 2023-10-23 | PDF 83.2 KB |
Application Information
| Application ID | pLQIxUgErCs6RVldHnB7jQ== |
|---|---|
| Final Action Date | 2023-10-23 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004944047 |
| Model | MERCURY6E-M |
| Frequency Range | 902.625-921 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | UHF RFID Reader Module |
| Responsible Party | Donald H Ferguson, President, dfe@lyngsoesystems.com , 6479570350 |
| Agent | Dan Dan Dan, UltraTech Engineering Labs Inc, dan@ultratech-labs.com  , 905-829-1570 |
| Test Firm | Tri Luu, UltraTech Engineering Labs, Inc., tri@ultratech-labs.com , 905-829-1570 |
| TCB Email | vic@ultratech-labs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change: Add additional antenna as documented in the filing. C2PC, Adding 375 KHz channel spacing via Firmware. This is only a software change of the frequency and the end user cannot switch between channel plans. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| pLQIxUgErCs6RVldHnB7jQ== | 2023-10-23 | Class II permissive change or modification of presently authorized equipment |
| z5sIvB/j5rbQH9+8sBORvQ== | 2023-10-12 | Change in identification of presently authorized equipment. Original FCC ID: QV5MERCURY6E-M Grant Date: 01/04/2021 |
Equipment Authorization
Grants
TCB Grant - Application z5sIvB/j5rbQH9+8sBORvQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 10/12/2023 Application Dated: 10/12/2023 |
| Lyngsoe Systems Ltd. |
| 101 Simona Dr., Unit 2 |
| Bolton, Ontario, L7E 4E8 Canada |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-MERCURY6E-M |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UHF RFID Reader Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 1.0 | |||
| 15C | 917.4 - 927.2 | 1.0 | |||
| 15C | 917.5 - 922.5 | 1.0 | |||
| 15C | 902.625 - 921.0 | 1.0 |
| C2PC, Adding 375 KHz channel spacing via Firmware. This is only a software change of the frequency and the end user cannot switch between channel plans. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
EAS Grant - Application z5sIvB/j5rbQH9+8sBORvQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lyngsoe Systems Ltd. 101 Simona Dr., Unit 2 Bolton, Ontario, L7E 4E8 Canada |
Date of Grant: 10/12/2023 Application Dated: 10/12/2023 |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-MERCURY6E-M |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UHF RFID Reader Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 1.0 | |||
| 15C | 917.4 - 927.2 | 1.0 | |||
| 15C | 917.5 - 922.5 | 1.0 | |||
| 15C | 902.625 - 921.0 | 1.0 |
| C2PC, Adding 375 KHz channel spacing via Firmware. This is only a software change of the frequency and the end user cannot switch between channel plans. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 10/23/2023 Application Dated: 10/23/2023 |
| Lyngsoe Systems Ltd. |
| 101 Simona Dr., Unit 2 |
| Bolton, Ontario, L7E 4E8 Canada |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-MERCURY6E-M |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UHF RFID Reader Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 1.0 | |||
| 15C | 917.4 - 927.2 | 1.0 | |||
| 15C | 917.5 - 922.5 | 1.0 | |||
| 15C | 902.625 - 921.0 | 1.0 |
| Class II Permissive Change: Add additional antenna as documented in the filing. C2PC, Adding 375 KHz channel spacing via Firmware. This is only a software change of the frequency and the end user cannot switch between channel plans. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
EAS Grant - Application pLQIxUgErCs6RVldHnB7jQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lyngsoe Systems Ltd. 101 Simona Dr., Unit 2 Bolton, Ontario, L7E 4E8 Canada |
Date of Grant: 10/23/2023 Application Dated: 10/23/2023 |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-MERCURY6E-M |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UHF RFID Reader Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 1.0 | |||
| 15C | 917.4 - 927.2 | 1.0 | |||
| 15C | 917.5 - 922.5 | 1.0 | |||
| 15C | 902.625 - 921.0 | 1.0 |
| Class II Permissive Change: Add additional antenna as documented in the filing. C2PC, Adding 375 KHz channel spacing via Firmware. This is only a software change of the frequency and the end user cannot switch between channel plans. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| Mail To: |