FCC ID PQG-XREADER
WiFi and Bluetooth Module
by Lyngsoe Systems Ltd.
Grantee Code: PQG Product Code: XREADER
Latest application date: 2023-05-18
FCC ID Device Details
| FCC ID | PQG-XREADER |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | PQG |
| Product Code | XREADER |
| Applicant Business | Lyngsoe Systems Ltd. 🇨🇦 |
| Related Domains |  lyngsoesystems.com |
| Equipment Class | WiFi and Bluetooth Module |
| Test Firm | UltraTech Engineering Labs Inc |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2023-05-18 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2023-05-18 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-05-18 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-01-04 |
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2022-01-04 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-01-04 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 03/27/2018 | 2021-12-22 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 03/27/2018 | 2021-12-22 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 03/27/2018 | 2021-12-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual Addendum | Users Manual | 2023-05-18 | PDF 74.5 KB |
| User Manual Addendum | Users Manual | 2022-01-04 | PDF 71.4 KB |
| External Photos | External Photos | 2021-12-22 | PDF 245 KB |
| ID Label and Location Info | ID Label/Location Info | 2021-12-22 | PDF 71.7 KB |
| Antennas Specifications | Test Report | 2023-05-18 | PDF 412.2 KB |
| Using Original Test Reports | Attestation Statements | 2023-05-18 | PDF 169.3 KB |
| Using Original Test Reports | Attestation Statements | 2022-01-04 | PDF 297.7 KB |
| Section 2.911(d)(7) | Attestation Statements | 2023-05-18 | PDF 149.8 KB |
| Sections 2.911(d)(5)(i) & (ii) | Attestation Statements | 2023-05-18 | PDF 259.4 KB |
| Agent Authorization | Cover Letter(s) | 2023-05-18 | PDF 254.9 KB |
| C2PC Request | Cover Letter(s) | 2023-05-18 | PDF 281.3 KB |
| Agent Authorization | Cover Letter(s) | 2022-01-04 | PDF 112.5 KB |
| C2PC Request | Cover Letter(s) | 2022-01-04 | PDF 323.8 KB |
| Applicant Change in ID Request | Cover Letter(s) | 2021-12-22 | PDF 84.3 KB |
| Original Grantee Authorization | Cover Letter(s) | 2021-12-22 | PDF 252.5 KB |
| Antennas Specifications | RF Exposure Info | 2023-05-18 | PDF 412.2 KB |
| MPE Evaluation for Co-location | RF Exposure Info | 2023-05-18 | PDF 58.2 KB |
| MPE from FCC ID QV5MERCURY6E-M | RF Exposure Info | 2023-05-18 | PDF 1.7 MB |
| MPE from FCC ID RI7LE910CXWWX | RF Exposure Info | 2023-05-18 | PDF 335.8 KB |
| MPE from FCC ID Z64-WL18DBMOD | RF Exposure Info | 2023-05-18 | PDF 324.3 KB |
| MPE Evaluation for Co-location | RF Exposure Info | 2022-01-04 | PDF 65.2 KB |
| MPE from FCC ID QV5MERCURY6E-M | RF Exposure Info | 2022-01-04 | PDF 18 KB |
| MPE from FCC ID RI7LE910CXNF | RF Exposure Info | 2022-01-04 | PDF 262.6 KB |
| MPE from FCC ID TWYIPJREV | RF Exposure Info | 2022-01-04 | PDF 1.1 MB |
| MPE from FCC ID XMR201906EG21G | RF Exposure Info | 2022-01-04 | PDF 337.4 KB |
Application Information
| Application ID | t962DGHWOaxEHKyVTvwrtQ== |
|---|---|
| Final Action Date | 2023-05-18 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004944047 |
| Model | XREADER |
| Frequency Range | 5745-5825 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | WiFi and Bluetooth Module |
| Responsible Party | Donald H Ferguson, President, dfe@lyngsoesystems.com , 6479570350 |
| Agent | Dan Dan Dan, UltraTech Engineering Labs Inc, dan@ultratech-labs.com  , 905-829-1570 |
| Test Firm | Tri Luu, UltraTech Engineering Labs Inc, tri@ultratech-labs.com , 905-829-1570 |
| TCB Email | vic@ultratech-labs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). Class II Permissive Change to allow co-location with Impinj, Inc. RFID Reader Module (FCC ID: TWYIPJREV) / JADAK, a business unit of Novanta Corporation RFID Module (FCC ID: QV5MERCURY6E-M) and/or Quectel Wireless Solutions Co. Ltd. LTE Module (FCC ID: XMR201906EG21G) / Telit Communications S.p.A. LTE Module (FCC ID: RI7LE910CXNF). OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 55 cm. Class II Permissive Change: To enabled co-location with JADAK, a business unit of Novanta Corporation RFID Reader Module (FCC ID: QV5MERCURY6E-M) and Telit Communications S.p.A. Data Terminal Module (FCC ID: RI7LE910CXWWX) as documented in the filing at a minimum separation distance of 55 cm. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| t962DGHWOaxEHKyVTvwrtQ== | 2023-05-18 | Class II permissive change or modification of presently authorized equipment |
| E2eq1HFdiNAOb20LxPRREw== | 2023-05-18 | Class II permissive change or modification of presently authorized equipment |
| BU/g9L4pWFTfgw5ntM6wLQ== | 2023-05-18 | Class II permissive change or modification of presently authorized equipment |
| x7nlaXhaUKObePuHi4HS3g== | 2022-01-04 | Class II permissive change or modification of presently authorized equipment |
| TAzstiT/GUSgwy5WIW2HMg== | 2022-01-04 | Class II permissive change or modification of presently authorized equipment |
| J9+H78+HXjQ6dOPDXbncwQ== | 2022-01-04 | Class II permissive change or modification of presently authorized equipment |
| PxdPnLdf7Ns6ylquQROsrQ== | 2021-12-22 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 03/27/2018 |
| 8BC7utY1yS2iwx4R7ifS2w== | 2021-12-22 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 03/27/2018 |
| +6xk89eOnd42WQ2b7MK5oA== | 2021-12-22 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 03/27/2018 |
Equipment Authorization
Grants
TCB Grant - Application x7nlaXhaUKObePuHi4HS3g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 01/04/2022 Application Dated: 01/04/2022 |
| Lyngsoe Systems Ltd. |
| 101 Simona Dr., Unit 2 |
| Bolton, Ontario, L7E 4E8 Canada |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products.OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class IIPermissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). Class II Permissive Change to allow co-location with Impinj, Inc. RFID Reader Module (FCC ID: TWYIPJREV) / JADAK, a business unit of Novanta Corporation RFID Module (FCC ID: QV5MERCURY6E-M) and/or Quectel Wireless Solutions Co. Ltd. LTE Module (FCC ID: XMR201906EG21G) / Telit Communications S.p.A. LTE Module (FCC ID: RI7LE910CXNF). OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 55 cm. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application x7nlaXhaUKObePuHi4HS3g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lyngsoe Systems Ltd. 101 Simona Dr., Unit 2 Bolton, Ontario, L7E 4E8 Canada |
Date of Grant: 01/04/2022 Application Dated: 01/04/2022 |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products.OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class IIPermissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). Class II Permissive Change to allow co-location with Impinj, Inc. RFID Reader Module (FCC ID: TWYIPJREV) / JADAK, a business unit of Novanta Corporation RFID Module (FCC ID: QV5MERCURY6E-M) and/or Quectel Wireless Solutions Co. Ltd. LTE Module (FCC ID: XMR201906EG21G) / Telit Communications S.p.A. LTE Module (FCC ID: RI7LE910CXNF). OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 55 cm. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 01/04/2022 Application Dated: 01/04/2022 |
| Lyngsoe Systems Ltd. |
| 101 Simona Dr., Unit 2 |
| Bolton, Ontario, L7E 4E8 Canada |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0499 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0525 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). Class II Permissive Change to allow co-location with Impinj, Inc. RFID Reader Module (FCC ID: TWYIPJREV) / JADAK, a business unit of Novanta Corporation RFID Module (FCC ID: QV5MERCURY6E-M) and/or Quectel Wireless Solutions Co. Ltd. LTE Module (FCC ID: XMR201906EG21G) / Telit Communications S.p.A. LTE Module (FCC ID: RI7LE910CXNF). OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 55 cm. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application TAzstiT/GUSgwy5WIW2HMg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lyngsoe Systems Ltd. 101 Simona Dr., Unit 2 Bolton, Ontario, L7E 4E8 Canada |
Date of Grant: 01/04/2022 Application Dated: 01/04/2022 |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0499 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0525 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). Class II Permissive Change to allow co-location with Impinj, Inc. RFID Reader Module (FCC ID: TWYIPJREV) / JADAK, a business unit of Novanta Corporation RFID Module (FCC ID: QV5MERCURY6E-M) and/or Quectel Wireless Solutions Co. Ltd. LTE Module (FCC ID: XMR201906EG21G) / Telit Communications S.p.A. LTE Module (FCC ID: RI7LE910CXNF). OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 55 cm. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 05/18/2023 Application Dated: 05/18/2023 |
| Lyngsoe Systems Ltd. |
| 101 Simona Dr., Unit 2 |
| Bolton, Ontario, L7E 4E8 Canada |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0499 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0525 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). Class II Permissive Change to allow co-location with Impinj, Inc. RFID Reader Module (FCC ID: TWYIPJREV) / JADAK, a business unit of Novanta Corporation RFID Module (FCC ID: QV5MERCURY6E-M) and/or Quectel Wireless Solutions Co. Ltd. LTE Module (FCC ID: XMR201906EG21G) / Telit Communications S.p.A. LTE Module (FCC ID: RI7LE910CXNF). OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 55 cm. Class II Permissive Change: To enabled co-location with JADAK, a business unit of Novanta Corporation RFID Reader Module (FCC ID: QV5MERCURY6E-M) and Telit Communications S.p.A. Data Terminal Module (FCC ID: RI7LE910CXWWX) as documented in the filing at a minimum separation distance of 55 cm. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application t962DGHWOaxEHKyVTvwrtQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lyngsoe Systems Ltd. 101 Simona Dr., Unit 2 Bolton, Ontario, L7E 4E8 Canada |
Date of Grant: 05/18/2023 Application Dated: 05/18/2023 |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0499 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0525 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). Class II Permissive Change to allow co-location with Impinj, Inc. RFID Reader Module (FCC ID: TWYIPJREV) / JADAK, a business unit of Novanta Corporation RFID Module (FCC ID: QV5MERCURY6E-M) and/or Quectel Wireless Solutions Co. Ltd. LTE Module (FCC ID: XMR201906EG21G) / Telit Communications S.p.A. LTE Module (FCC ID: RI7LE910CXNF). OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 55 cm. Class II Permissive Change: To enabled co-location with JADAK, a business unit of Novanta Corporation RFID Reader Module (FCC ID: QV5MERCURY6E-M) and Telit Communications S.p.A. Data Terminal Module (FCC ID: RI7LE910CXWWX) as documented in the filing at a minimum separation distance of 55 cm. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 12/22/2021 Application Dated: 12/22/2021 |
| Lyngsoe Systems Ltd. |
| 101 Simona Dr., Unit 2 |
| Bolton, Ontario, L7E 4E8 Canada |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application PxdPnLdf7Ns6ylquQROsrQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lyngsoe Systems Ltd. 101 Simona Dr., Unit 2 Bolton, Ontario, L7E 4E8 Canada |
Date of Grant: 12/22/2021 Application Dated: 12/22/2021 |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 01/04/2022 Application Dated: 01/04/2022 |
| Lyngsoe Systems Ltd. |
| 101 Simona Dr., Unit 2 |
| Bolton, Ontario, L7E 4E8 Canada |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). Class II Permissive Change to allow co-location with Impinj, Inc. RFID Reader Module (FCC ID: TWYIPJREV) / JADAK, a business unit of Novanta Corporation RFID Module (FCC ID: QV5MERCURY6E-M) and/or Quectel Wireless Solutions Co. Ltd. LTE Module (FCC ID: XMR201906EG21G) / Telit Communications S.p.A. LTE Module (FCC ID: RI7LE910CXNF). OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 55 cm. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application J9+H78+HXjQ6dOPDXbncwQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lyngsoe Systems Ltd. 101 Simona Dr., Unit 2 Bolton, Ontario, L7E 4E8 Canada |
Date of Grant: 01/04/2022 Application Dated: 01/04/2022 |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). Class II Permissive Change to allow co-location with Impinj, Inc. RFID Reader Module (FCC ID: TWYIPJREV) / JADAK, a business unit of Novanta Corporation RFID Module (FCC ID: QV5MERCURY6E-M) and/or Quectel Wireless Solutions Co. Ltd. LTE Module (FCC ID: XMR201906EG21G) / Telit Communications S.p.A. LTE Module (FCC ID: RI7LE910CXNF). OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 55 cm. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 05/18/2023 Application Dated: 05/18/2023 |
| Lyngsoe Systems Ltd. |
| 101 Simona Dr., Unit 2 |
| Bolton, Ontario, L7E 4E8 Canada |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). Class II Permissive Change to allow co-location with Impinj, Inc. RFID Reader Module (FCC ID: TWYIPJREV) / JADAK, a business unit of Novanta Corporation RFID Module (FCC ID: QV5MERCURY6E-M) and/or Quectel Wireless Solutions Co. Ltd. LTE Module (FCC ID: XMR201906EG21G) / Telit Communications S.p.A. LTE Module (FCC ID: RI7LE910CXNF). OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 55 cm. Class II Permissive Change: To enabled co-location with JADAK, a business unit of Novanta Corporation RFID Reader Module (FCC ID: QV5MERCURY6E-M) and Telit Communications S.p.A. Data Terminal Module (FCC ID: RI7LE910CXWWX) as documented in the filing at a minimum separation distance of 55 cm. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application E2eq1HFdiNAOb20LxPRREw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lyngsoe Systems Ltd. 101 Simona Dr., Unit 2 Bolton, Ontario, L7E 4E8 Canada |
Date of Grant: 05/18/2023 Application Dated: 05/18/2023 |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). Class II Permissive Change to allow co-location with Impinj, Inc. RFID Reader Module (FCC ID: TWYIPJREV) / JADAK, a business unit of Novanta Corporation RFID Module (FCC ID: QV5MERCURY6E-M) and/or Quectel Wireless Solutions Co. Ltd. LTE Module (FCC ID: XMR201906EG21G) / Telit Communications S.p.A. LTE Module (FCC ID: RI7LE910CXNF). OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 55 cm. Class II Permissive Change: To enabled co-location with JADAK, a business unit of Novanta Corporation RFID Reader Module (FCC ID: QV5MERCURY6E-M) and Telit Communications S.p.A. Data Terminal Module (FCC ID: RI7LE910CXWWX) as documented in the filing at a minimum separation distance of 55 cm. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 05/18/2023 Application Dated: 05/18/2023 |
| Lyngsoe Systems Ltd. |
| 101 Simona Dr., Unit 2 |
| Bolton, Ontario, L7E 4E8 Canada |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). Class II Permissive Change to allow co-location with Impinj, Inc. RFID Reader Module (FCC ID: TWYIPJREV) / JADAK, a business unit of Novanta Corporation RFID Module (FCC ID: QV5MERCURY6E-M) and/or Quectel Wireless Solutions Co. Ltd. LTE Module (FCC ID: XMR201906EG21G) / Telit Communications S.p.A. LTE Module (FCC ID: RI7LE910CXNF). OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 55 cm. Class II Permissive Change: To enabled co-location with JADAK, a business unit of Novanta Corporation RFID Reader Module (FCC ID: QV5MERCURY6E-M) and Telit Communications S.p.A. Data Terminal Module (FCC ID: RI7LE910CXWWX) as documented in the filing at a minimum separation distance of 55 cm. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application BU/g9L4pWFTfgw5ntM6wLQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lyngsoe Systems Ltd. 101 Simona Dr., Unit 2 Bolton, Ontario, L7E 4E8 Canada |
Date of Grant: 05/18/2023 Application Dated: 05/18/2023 |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). Class II Permissive Change to allow co-location with Impinj, Inc. RFID Reader Module (FCC ID: TWYIPJREV) / JADAK, a business unit of Novanta Corporation RFID Module (FCC ID: QV5MERCURY6E-M) and/or Quectel Wireless Solutions Co. Ltd. LTE Module (FCC ID: XMR201906EG21G) / Telit Communications S.p.A. LTE Module (FCC ID: RI7LE910CXNF). OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 55 cm. Class II Permissive Change: To enabled co-location with JADAK, a business unit of Novanta Corporation RFID Reader Module (FCC ID: QV5MERCURY6E-M) and Telit Communications S.p.A. Data Terminal Module (FCC ID: RI7LE910CXWWX) as documented in the filing at a minimum separation distance of 55 cm. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 12/22/2021 Application Dated: 12/22/2021 |
| Lyngsoe Systems Ltd. |
| 101 Simona Dr., Unit 2 |
| Bolton, Ontario, L7E 4E8 Canada |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products.OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class IIPermissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 8BC7utY1yS2iwx4R7ifS2w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lyngsoe Systems Ltd. 101 Simona Dr., Unit 2 Bolton, Ontario, L7E 4E8 Canada |
Date of Grant: 12/22/2021 Application Dated: 12/22/2021 |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products.OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class IIPermissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 12/22/2021 Application Dated: 12/22/2021 |
| Lyngsoe Systems Ltd. |
| 101 Simona Dr., Unit 2 |
| Bolton, Ontario, L7E 4E8 Canada |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0499 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0525 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application +6xk89eOnd42WQ2b7MK5oA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lyngsoe Systems Ltd. 101 Simona Dr., Unit 2 Bolton, Ontario, L7E 4E8 Canada |
Date of Grant: 12/22/2021 Application Dated: 12/22/2021 |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0499 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0525 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |