FCC ID PQG-XREADER2
WiFi and Bluetooth Module
by Lyngsoe Systems Ltd.
Grantee Code: PQG Product Code: XREADER2
Latest application date: 2022-01-05
FCC ID Device Details
| FCC ID | PQG-XREADER2 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | PQG |
| Product Code | XREADER2 |
| Applicant Business | Lyngsoe Systems Ltd. 🇨🇦 |
| Related Domains |  lyngsoesystems.com |
| Equipment Class | WiFi and Bluetooth Module |
| Test Firm | UltraTech Engineering Labs Inc |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2422-2452 MHz | Class II permissive change or modification of presently authorized equipment | 2022-01-05 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-01-05 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 02/21/2018 | 2022-01-03 |
| 2422-2452 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 02/21/2018 | 2022-01-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual Addendum | Users Manual | 2022-01-05 | PDF 71.5 KB |
| External Photos | External Photos | 2022-01-03 | PDF 176.8 KB |
| ID Label and Location Info | ID Label/Location Info | 2022-01-03 | PDF 71.3 KB |
| Agent Authorization | Block Diagram | 2022-01-05 | PDF 111.8 KB |
| Using Original Test Reports | Attestation Statements | 2022-01-05 | PDF 146.7 KB |
| Agent Authorization | Cover Letter(s) | 2022-01-05 | PDF 111.8 KB |
| C2PC Request | Cover Letter(s) | 2022-01-05 | PDF 124.9 KB |
| Applicant Change in ID Request | Cover Letter(s) | 2022-01-03 | PDF 164.4 KB |
| Original Grantee Authorization | Cover Letter(s) | 2022-01-03 | PDF 252.5 KB |
| MPE Evaluation for Co-location | RF Exposure Info | 2022-01-05 | PDF 65 KB |
| MPE from FCC ID QV5MERCURY6E-M | RF Exposure Info | 2022-01-05 | PDF 18 KB |
| MPE from FCC ID RI7LE910CXNF | RF Exposure Info | 2022-01-05 | PDF 262.6 KB |
| MPE from FCC ID TWYIPJREV | RF Exposure Info | 2022-01-05 | PDF 1.1 MB |
| MPE from FCC ID XMR201906EG21G | RF Exposure Info | 2022-01-05 | PDF 337.4 KB |
| MPE from FCC ID Z64-WL18SBMOD | RF Exposure Info | 2022-01-05 | PDF 463.6 KB |
Application Information
| Application ID | jVVUUctGrKcgbEFsYrgtVQ== |
|---|---|
| Final Action Date | 2022-01-05 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004944047 |
| Model | XREADER2 |
| Frequency Range | 2422-2452 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WiFi and Bluetooth Module |
| Responsible Party | Donald H Ferguson, President, dfe@lyngsoesystems.com , 6479570350 |
| Agent | Dan Dan Dan, UltraTech Engineering Labs Inc, dan@ultratech-labs.com  , 905-829-1570 |
| Test Firm | Tri Luu, UltraTech Engineering Labs Inc, tri@ultratech-labs.com , 905-829-1570 |
| TCB Email | vic@ultratech-labs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.5 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. (Original Grant 02/03/2014) Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Class II Permissive Change to allow co-location with Impinj, Inc. RFID Reader Module (FCC ID: TWYIPJREV) / JADAK, a business unit of Novanta Corporation RFID Module (FCC ID: QV5MERCURY6E-M) and/or Quectel Wireless Solutions Co. Ltd. LTE Module (FCC ID: XMR201906EG21G) / Telit Communications S.p.A. LTE Module (FCC ID: RI7LE910CXNF). OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 55 cm. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| jVVUUctGrKcgbEFsYrgtVQ== | 2022-01-05 | Class II permissive change or modification of presently authorized equipment |
| OzalJvFQrIiINBKko7DdvA== | 2022-01-05 | Class II permissive change or modification of presently authorized equipment |
| KuqekFYF8Vt6q46EjrwNtA== | 2022-01-03 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 02/21/2018 |
| 1Lx0IaoYM8r++2TwBRgNzA== | 2022-01-03 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 02/21/2018 |
Equipment Authorization
Grants
TCB Grant - Application OzalJvFQrIiINBKko7DdvA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 01/05/2022 Application Dated: 01/05/2022 |
| Lyngsoe Systems Ltd. |
| 101 Simona Dr., Unit 2 |
| Bolton, Ontario, L7E 4E8 Canada |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER2 |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0173 |
| Single Modular Approval. Power listed is maximum combined conducted output power. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.5 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. (Original Grant 02/03/2014) Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Class II Permissive Change to allow co-location with Impinj, Inc. RFID Reader Module (FCC ID: TWYIPJREV) / JADAK, a business unit of Novanta Corporation RFID Module (FCC ID: QV5MERCURY6E-M) and/or Quectel Wireless Solutions Co. Ltd. LTE Module (FCC ID: XMR201906EG21G) / Telit Communications S.p.A. LTE Module (FCC ID: RI7LE910CXNF). OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 55 cm. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application OzalJvFQrIiINBKko7DdvA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lyngsoe Systems Ltd. 101 Simona Dr., Unit 2 Bolton, Ontario, L7E 4E8 Canada |
Date of Grant: 01/05/2022 Application Dated: 01/05/2022 |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER2 |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0173 |
| Single Modular Approval. Power listed is maximum combined conducted output power. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.5 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. (Original Grant 02/03/2014) Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Class II Permissive Change to allow co-location with Impinj, Inc. RFID Reader Module (FCC ID: TWYIPJREV) / JADAK, a business unit of Novanta Corporation RFID Module (FCC ID: QV5MERCURY6E-M) and/or Quectel Wireless Solutions Co. Ltd. LTE Module (FCC ID: XMR201906EG21G) / Telit Communications S.p.A. LTE Module (FCC ID: RI7LE910CXNF). OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 55 cm. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 01/03/2022 Application Dated: 01/03/2022 |
| Lyngsoe Systems Ltd. |
| 101 Simona Dr., Unit 2 |
| Bolton, Ontario, L7E 4E8 Canada |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER2 |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0173 |
| Single Modular Approval. Power listed is maximum combined conducted output power. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.5 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. (Original Grant 02/03/2014) Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application KuqekFYF8Vt6q46EjrwNtA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lyngsoe Systems Ltd. 101 Simona Dr., Unit 2 Bolton, Ontario, L7E 4E8 Canada |
Date of Grant: 01/03/2022 Application Dated: 01/03/2022 |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER2 |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0173 |
| Single Modular Approval. Power listed is maximum combined conducted output power. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.5 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. (Original Grant 02/03/2014) Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 01/05/2022 Application Dated: 01/05/2022 |
| Lyngsoe Systems Ltd. |
| 101 Simona Dr., Unit 2 |
| Bolton, Ontario, L7E 4E8 Canada |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER2 |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.01 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2438 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.1052 |
| Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.5 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. (Original Grant 02/03/2014) Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Class II Permissive Change to allow co-location with Impinj, Inc. RFID Reader Module (FCC ID: TWYIPJREV) / JADAK, a business unit of Novanta Corporation RFID Module (FCC ID: QV5MERCURY6E-M) and/or Quectel Wireless Solutions Co. Ltd. LTE Module (FCC ID: XMR201906EG21G) / Telit Communications S.p.A. LTE Module (FCC ID: RI7LE910CXNF). OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 55 cm. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application jVVUUctGrKcgbEFsYrgtVQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lyngsoe Systems Ltd. 101 Simona Dr., Unit 2 Bolton, Ontario, L7E 4E8 Canada |
Date of Grant: 01/05/2022 Application Dated: 01/05/2022 |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER2 |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.01 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2438 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.1052 |
| Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.5 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. (Original Grant 02/03/2014) Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Class II Permissive Change to allow co-location with Impinj, Inc. RFID Reader Module (FCC ID: TWYIPJREV) / JADAK, a business unit of Novanta Corporation RFID Module (FCC ID: QV5MERCURY6E-M) and/or Quectel Wireless Solutions Co. Ltd. LTE Module (FCC ID: XMR201906EG21G) / Telit Communications S.p.A. LTE Module (FCC ID: RI7LE910CXNF). OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 55 cm. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 01/03/2022 Application Dated: 01/03/2022 |
| Lyngsoe Systems Ltd. |
| 101 Simona Dr., Unit 2 |
| Bolton, Ontario, L7E 4E8 Canada |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER2 |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.01 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2438 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.1052 |
| Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.5 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. (Original Grant 02/03/2014) Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 1Lx0IaoYM8r++2TwBRgNzA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lyngsoe Systems Ltd. 101 Simona Dr., Unit 2 Bolton, Ontario, L7E 4E8 Canada |
Date of Grant: 01/03/2022 Application Dated: 01/03/2022 |
| Attention: Donald Ferguson , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PQG-XREADER2 |
| Name of Grantee: | Lyngsoe Systems Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.01 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2438 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.1052 |
| Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.5 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. (Original Grant 02/03/2014) Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |