FCC ID PQRDS540-MPCI4W

Wireless LAN MiniPCI Card User Unit

by Contec Co., Ltd.

Grantee Code: PQR   Product Code: DS540MPCI4W
Latest application date: 2007-06-27

FCC ID Device Details

FCC IDPQRDS540-MPCI4W
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePQR
Product CodeDS540MPCI4W
Applicant BusinessContec Co., Ltd. 🇯🇵
Related Domains contec.jp
Equipment ClassWireless LAN MiniPCI Card User Unit
Test FirmUL Japan, Inc. Yokowa EMC Lab.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5320 MHzClass II permissive change or modification of presently authorized equipment2007-06-27
5180-5320 MHzOriginal Equipment2004-12-15
2412-2462 MHzOriginal Equipment2004-12-15

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2007-06-27PDF 155.9 KB
Installation manualUsers Manual2005-01-29PDF 120 KB
Installation manualUsers Manual2005-01-29PDF 120 KB
Manual revised Metadata onlyUsers Manual2005-01-29PDF 117.5 KB
installation manual revised Metadata onlyUsers Manual2005-01-29PDF 117.5 KB
Internal photosInternal Photos2005-01-29PDF 176.3 KB
Internal photos 1Internal Photos2005-01-29PDF 429 KB
Internal photos 2Internal Photos2005-01-29PDF 176.3 KB
External photosExternal Photos2005-01-29PDF 218.5 KB
FCC ID label infoID Label/Location Info2004-12-15PDF 27.2 KB
FCC ID label locationID Label/Location Info2004-12-15PDF 28.2 KB
Label locationID Label/Location Info2004-12-15PDF 28.2 KB
Label sampleID Label/Location Info2004-12-15PDF 27.2 KB
Revised operational description IAW FCC correspondence 11693Operational Description2004-12-15PDF 728.7 KB
Set up photosTest Setup Photos2005-01-29PDF 262.6 KB
Setup photosTest Setup Photos2005-01-29PDF 262.6 KB
Test reportTest Report2007-06-27PDF 605.8 KB
Test report 2Test Report2007-06-27PDF 108.1 KB
set up photosTest Report2007-06-27PDF 153.6 KB
Test report 15407 revisedTest Report2004-12-15PDF 2.1 MB
Test report revisedTest Report2004-12-15PDF 2.2 MB
POACover Letter(s)2007-06-27PDF 230.4 KB
Reason for PCCover Letter(s)2007-06-27PDF 254.7 KB
ATCB commentsCover Letter(s)2004-12-15PDF 62.6 KB
Email response to FCC correspondence 11693Cover Letter(s)2004-12-15PDF 10.6 KB
Modular request letter for LMACover Letter(s)2004-12-15PDF 252.3 KB
REquest for short term confidentialityCover Letter(s)2004-12-15PDF 18.4 KB
Request for Modular approval for use in specific hostCover Letter(s)2004-12-15PDF 252.3 KB
Request for confidentialityCover Letter(s)2004-12-15PDF 17 KB
Request for short term confidentialityCover Letter(s)2004-12-15PDF 18.4 KB
Response to ATCBCover Letter(s)2004-12-15PDF 87.5 KB
declarationsCover Letter(s)2004-12-15PDF 61.7 KB
MPERF Exposure Info2004-12-15PDF 159.5 KB
Block diagram Metadata onlyBlock DiagramPDF 36.8 KB
Schematics Metadata onlySchematicsPDF 349.9 KB
Operational description Metadata onlyOperational DescriptionPDF 646.4 KB

Application Information

Application IDMcvRV8b9tAZ9i2+DCXYSbw==
Final Action Date2007-06-27
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0011347630
ModelDS540-MPCI4W
Frequency Range5180-5320 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless LAN MiniPCI Card User Unit
Responsible PartyMr. Naoki Ikeda, Approval Contact, ikeda@contec.jp , 81-6-6477-1363
Test FirmTetsuya Hashimoto, UL Japan, Inc. Yokowa EMC Lab., Tetsuya.Hashimoto@jp.ul.com , 81-596-24-8116
TCB Emailhotline@AmericanTCB.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular Approval. Power Output listed is Conducted. This module is approved for use only in the final host product as shown in this filing. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Per 15.407(e) this device is restricted to indoor use only when operating in the 5.15-5.25 GHz range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This PC adds Client only DFS capability for the Frequency range 5250-5350MHz.

Applications

Application IDDatePurpose
McvRV8b9tAZ9i2+DCXYSbw==2007-06-27Class II permissive change or modification of presently authorized equipment
fKp0eBzNpTb78/yGaQDygw==2004-12-15Original Equipment
8x3wM512vCHHK6javGFWhw==2004-12-15Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.3115CCC
5180-5320 MHz0.03515ECC
5180-5320 MHz0.03515ECC, ND
5745-5805 MHz0.03615ECC
5745-5805 MHz0.03615ECC, ND
5825 MHz0.07215CCC

Grants

TCB Grant - Application McvRV8b9tAZ9i2+DCXYSbw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/27/2007

Application Dated: 06/26/2007
Contec Co., Ltd.
3-9-31, Himesato, Nishiyodogawa-ku
Osaka, 555-0025
Japan
 
Attention: Mr. Naoki Ikeda , Approval Contact

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PQRDS540-MPCI4W
Name of Grantee:  Contec Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN MiniPCI Card User Unit
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC ND 15E 5180.0  -  5320.0 0.035  
CC ND 15E 5745.0  -  5805.0 0.036  

Modular Approval. Power Output listed is Conducted. This module is approved for use only in the final host product as shown in this filing. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Per 15.407(e) this device is restricted to indoor use only when operating in the 5.15-5.25 GHz range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This PC adds Client only DFS capability for the Frequency range 5250-5350MHz.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application McvRV8b9tAZ9i2+DCXYSbw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Contec Co., Ltd.
3-9-31, Himesato, Nishiyodogawa-ku
Osaka, 555-0025
Japan
  Date of Grant: 06/27/2007

Application Dated: 06/26/2007
 
Attention: Mr. Naoki Ikeda , Approval Contact

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PQRDS540-MPCI4W
Name of Grantee:  Contec Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN MiniPCI Card User Unit
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC ND 15E 5180.0  -  5320.0 0.035  
CC ND 15E 5745.0  -  5805.0 0.036  

Modular Approval. Power Output listed is Conducted. This module is approved for use only in the final host product as shown in this filing. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Per 15.407(e) this device is restricted to indoor use only when operating in the 5.15-5.25 GHz range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This PC adds Client only DFS capability for the Frequency range 5250-5350MHz.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:


EA616239

TCB Grant - Application fKp0eBzNpTb78/yGaQDygw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 12/15/2004

Application Dated: 12/15/2004
Contec Co., Ltd.
3-9-31, Himesato, Nishiyodogawa-ku
Osaka, 555-0025
Japan
 
Attention: Mr. Naoki Ikeda , Approval Contact

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PQRDS540-MPCI4W
Name of Grantee:  Contec Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN MiniPCI Card User Unit
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5320.0 0.035  
CC 15E 5745.0  -  5805.0 0.036  

Modular Approval. Power Output listed is Conducted. This module is approved for use only in the final host product as shown in this filing. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Per 15.407(e) this device is restricted to indoor use only when operating in the 5.15-5.25 GHz range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application fKp0eBzNpTb78/yGaQDygw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Contec Co., Ltd.
3-9-31, Himesato, Nishiyodogawa-ku
Osaka, 555-0025
Japan
  Date of Grant: 12/15/2004

Application Dated: 12/15/2004
 
Attention: Mr. Naoki Ikeda , Approval Contact

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PQRDS540-MPCI4W
Name of Grantee:  Contec Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN MiniPCI Card User Unit
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5320.0 0.035  
CC 15E 5745.0  -  5805.0 0.036  

Modular Approval. Power Output listed is Conducted. This module is approved for use only in the final host product as shown in this filing. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Per 15.407(e) this device is restricted to indoor use only when operating in the 5.15-5.25 GHz range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 8x3wM512vCHHK6javGFWhw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 12/15/2004

Application Dated: 12/15/2004
Contec Co., Ltd.
3-9-31, Himesato, Nishiyodogawa-ku
Osaka, 555-0025
Japan
 
Attention: Mr. Naoki Ikeda , Approval Contact

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PQRDS540-MPCI4W
Name of Grantee:  Contec Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Wireless LAN MiniPCI Card User Unit
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.31  
CC 15C 5825.0  -  5825.0 0.072  

Modular Approval. Power Output listed is Conducted. This module is approved for use only in the final host product as shown in this filing. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 8x3wM512vCHHK6javGFWhw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Contec Co., Ltd.
3-9-31, Himesato, Nishiyodogawa-ku
Osaka, 555-0025
Japan
  Date of Grant: 12/15/2004

Application Dated: 12/15/2004
 
Attention: Mr. Naoki Ikeda , Approval Contact

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PQRDS540-MPCI4W
Name of Grantee:  Contec Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Wireless LAN MiniPCI Card User Unit
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.31  
CC 15C 5825.0  -  5825.0 0.072  

Modular Approval. Power Output listed is Conducted. This module is approved for use only in the final host product as shown in this filing. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: