FCC ID PQRDS540-MPCI6AP

Wireless LAN MiniPCI Card

by Contec Co., Ltd.

Grantee Code: PQR   Product Code: DS540MPCI6AP
Latest application date: 2007-06-25

FCC ID Device Details

FCC IDPQRDS540-MPCI6AP
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePQR
Product CodeDS540MPCI6AP
Applicant BusinessContec Co., Ltd. 🇯🇵
Related Domains contec.jp
Equipment ClassWireless LAN MiniPCI Card
Test FirmUL Japan, Inc. Yokowa EMC Lab.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2007-06-25
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: PQRDS540-MPCI6 Grant Date: 03/29/20062007-06-13
5180-5320 MHzChange in identification of presently authorized equipment. Original FCC ID: PQRDS540-MPCI6 Grant Date: 03/29/20062007-06-13

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2007-06-25PDF 138.3 KB
External photosExternal Photos2007-06-13PDF 85 KB
FCC ID labelID Label/Location Info2007-06-13PDF 102.8 KB
POACover Letter(s)2007-06-25PDF 232 KB
Reason for PCCover Letter(s)2007-06-25PDF 255.9 KB
Request for PCCover Letter(s)2007-06-25PDF 255.9 KB
FCC ID change requestCover Letter(s)2007-06-13PDF 292.6 KB
Request for change in FCC IDCover Letter(s)2007-06-13PDF 292.6 KB

Application Information

Application ID+5hY3yJou2evNhFYn3iRcA==
Final Action Date2007-06-25
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0011347630
ModelDS540-MPCI6AP
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless LAN MiniPCI Card
Responsible PartyMr. Naoki Ikeda, Approval Contact, ikeda@contec.jp , 81-6-6477-1363
Test FirmTetsuya Hashimoto, UL Japan, Inc. Yokowa EMC Lab., Tetsuya.Hashimoto@jp.ul.com , 81-596-24-8116
TCB Emailhotline@AmericanTCB.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output is Conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. Only the antenna gains documented in this filing may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. This PC removes the frequency band 5250-5350MHz.

Applications

Application IDDatePurpose
+5hY3yJou2evNhFYn3iRcA==2007-06-25Class II permissive change or modification of presently authorized equipment
jDfsnCA4nqrQQoOhPWtf3g==2007-06-13Change in identification of presently authorized equipment. Original FCC ID: PQRDS540-MPCI6 Grant Date: 03/29/2006
jAAFAnJzHkoJo9j3hMPJcQ==2007-06-13Change in identification of presently authorized equipment. Original FCC ID: PQRDS540-MPCI6 Grant Date: 03/29/2006

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.19515CCC
5180-5240 MHz0.01815ECC
5180-5320 MHz0.01815ECC
5745-5805 MHz0.02615ECC
5825 MHz0.11115CCC

Grants

TCB Grant - Application jDfsnCA4nqrQQoOhPWtf3g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/13/2007

Application Dated: 06/13/2007
Contec Co., Ltd.
3-9-31, Himesato, Nishiyodogawa-ku
Osaka, 555-0025
Japan
 
Attention: Mr. Naoki Ikeda , Approval Contact

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PQRDS540-MPCI6AP
Name of Grantee:  Contec Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Wireless LAN MiniPCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.195  
CC 15C 5825.0  -  5825.0 0.111  

Power Output is Conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. Only the antenna gains documented in this filing may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application jDfsnCA4nqrQQoOhPWtf3g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Contec Co., Ltd.
3-9-31, Himesato, Nishiyodogawa-ku
Osaka, 555-0025
Japan
  Date of Grant: 06/13/2007

Application Dated: 06/13/2007
 
Attention: Mr. Naoki Ikeda , Approval Contact

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PQRDS540-MPCI6AP
Name of Grantee:  Contec Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Wireless LAN MiniPCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.195  
CC 15C 5825.0  -  5825.0 0.111  

Power Output is Conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. Only the antenna gains documented in this filing may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA192732

TCB Grant - Application jAAFAnJzHkoJo9j3hMPJcQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/13/2007

Application Dated: 06/13/2007
Contec Co., Ltd.
3-9-31, Himesato, Nishiyodogawa-ku
Osaka, 555-0025
Japan
 
Attention: Mr. Naoki Ikeda , Approval Contact

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PQRDS540-MPCI6AP
Name of Grantee:  Contec Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN MiniPCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5320.0 0.018  
CC 15E 5745.0  -  5805.0 0.026  

Power Output is Conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. Only the antenna gains documented in this filing may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application jAAFAnJzHkoJo9j3hMPJcQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Contec Co., Ltd.
3-9-31, Himesato, Nishiyodogawa-ku
Osaka, 555-0025
Japan
  Date of Grant: 06/13/2007

Application Dated: 06/13/2007
 
Attention: Mr. Naoki Ikeda , Approval Contact

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PQRDS540-MPCI6AP
Name of Grantee:  Contec Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN MiniPCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5320.0 0.018  
CC 15E 5745.0  -  5805.0 0.026  

Power Output is Conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. Only the antenna gains documented in this filing may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA762463

TCB Grant - Application +5hY3yJou2evNhFYn3iRcA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/25/2007

Application Dated: 06/21/2007
Contec Co., Ltd.
3-9-31, Himesato, Nishiyodogawa-ku
Osaka, 555-0025
Japan
 
Attention: Mr. Naoki Ikeda , Approval Contact

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PQRDS540-MPCI6AP
Name of Grantee:  Contec Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN MiniPCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.018  
CC 15E 5745.0  -  5805.0 0.026  

Power Output is Conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. Only the antenna gains documented in this filing may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. This PC removes the frequency band 5250-5350MHz.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application +5hY3yJou2evNhFYn3iRcA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Contec Co., Ltd.
3-9-31, Himesato, Nishiyodogawa-ku
Osaka, 555-0025
Japan
  Date of Grant: 06/25/2007

Application Dated: 06/21/2007
 
Attention: Mr. Naoki Ikeda , Approval Contact

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PQRDS540-MPCI6AP
Name of Grantee:  Contec Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN MiniPCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.018  
CC 15E 5745.0  -  5805.0 0.026  

Power Output is Conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. Only the antenna gains documented in this filing may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. This PC removes the frequency band 5250-5350MHz.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA893545