FCC ID PQS-BM3900M

PQSBM3900M, PQS BM3900M, PQS-BM3900M, PQS-BM39OOM, PQ5-BM3900M, POS-BM3900M, P0S-BM3900M

Wavenet Technology Pty Ltd. Boomer III OEM Modem BM3900M

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: PQS-BM3900M is PQS. The remaining characters of the FCC ID, -BM3900M, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: Boomer III OEM Modem

Application: Boomer III OEM Modem
Equipment Class: TNF - Licensed Non-Broadcast Transmitter Held to Face
Short Link: fcc.id/PQS-BM3900M
Sources: FCC.gov | FCC.report
Registered By: Wavenet Technology Pty Ltd. - PQS (Australia)

App #	Purpose	Date	Unique ID
1	Original Equipment	2003-10-16	56NpdOe3Us+ev08cFjxh9Q==

Operating Frequencies

Colombia Homologation [?]: PQS-BM3900M

Frequency Range	Power Output	Tolerance	Emission Designator	Rule Parts	Grant Notes	Line Entry
896-901 MHz	2 Watts	1.5000000000ppm	12K0F1D	90	BB	1

Exhibits

Document	Type	Submitted Available
EXTERNAL PHOTOS 2	jpeg JPEG Image (349 kB)	2003-10-20 2003-10-16
EXTERNAL PHOTOS 1	jpeg JPEG Image (314 kB)	2003-10-20 2003-10-16
CORRESPONDENCE SUMMARY	Cover Letter(s) Microsoft Word (56 kB)	2003-10-20 2003-10-16
USERS MANUAL	Users Manual Adobe Acrobat PDF (1200 kB)	2003-10-20 2003-10-16
TUNING PROCEDURE	Parts List/Tune Up Info Adobe Acrobat PDF (71 kB)	2003-10-20 2003-10-16
INTERNAL PHOTOS 2	jpeg JPEG Image (469 kB)	2003-10-20 2003-10-16
INTERNAL PHOTOS 1	jpeg JPEG Image (485 kB)	2003-10-20 2003-10-16
TEST SETUP PHOTOS	Test Setup Photos Adobe Acrobat PDF (140 kB)	2003-10-20 2003-10-16
RF EXPOSURE	RF Exposure Info Adobe Acrobat PDF (162 kB)	2003-10-20 2003-10-16
CONFIDENTIAL REQUEST	Cover Letter(s) Adobe Acrobat PDF (82 kB)	2003-10-20 2003-10-16
TEST REPORT	Test Report Adobe Acrobat PDF (645 kB)	2003-10-20 2003-10-16
ID LABEL LOCATION	ID Label/Location Info Adobe Acrobat PDF (64 kB)	2003-10-20 2003-10-16
ID LABEL SAMPLE	ID Label/Location Info Adobe Acrobat PDF (11 kB)	2003-10-20 2003-10-16
ATTESTATION	Attestation Statements Adobe Acrobat PDF (77 kB)	2003-10-20 2003-10-16
EXTERNAL PHOTOS 2	External Photos JPEG Image (349 kB)	2003-10-20 2003-10-16
BLOCK DIAGRAM	Block Diagram Adobe Acrobat PDF (235 kB)	2003-10-20
INTERNAL PHOTOS 2	Internal Photos JPEG Image (469 kB)	2003-10-20 2003-10-16
SCHEMATICS	Schematics Adobe Acrobat PDF (138 kB)	2003-10-20
EXTERNAL PHOTOS 1	External Photos JPEG Image (314 kB)	2003-10-20 2003-10-16
INTERNAL PHOTOS 1	Internal Photos JPEG Image (485 kB)	2003-10-20 2003-10-16
Attestation Statements BOM	Parts List/Tune Up Info Adobe Acrobat PDF (6 kB)	2003-10-20
TECHNICAL DESCRIPTION	Operational Description Adobe Acrobat PDF (236 kB)	2003-10-20

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	Wavenet Technology Pty Ltd.
FCC Registration Number (FRN):	0006821649
Alphanumeric FCC ID:	PQSBM3900M
Unique Application Identifier:	56NpdOe3Us+ev08cFjxh9Q==
Line one:	140 Burswood Road
City:	Perth West Australia
State:	N/A
Country:	Australia
Zip Code:	6100

TCB Information

TCB Application Email Address:	TEI@TIMCOENGR.COM
TCB Scope:	B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97

FCC ID

Grantee Code:	PQS
Product Code:	-BM3900M

Person at the applicant's address to receive grant or for contact

Name:	Ross B Clark
Title:	Design Engineer

Telephone Number:

+61 8 9262 0200

Extension:

Fax Number:	+61 8 9355 5622
Email:	ross@wavenet.com.au

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: No

If so, specify the short-term confidentiality release date (MM/DD/YYYY format):
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: TNF - Licensed Non-Broadcast Transmitter Held to Face
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	Boomer III OEM Modem

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? No

Modular Equipment

Modular Type: Does not apply

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: UltraTech Engineering Labs Inc.

First Name: Tri

Last Name: Luu

Telephone Number:

877-747-6381

Extension:

Fax Number: 905-829-8050

E-mail: tri@ultratech-labs.com

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power listed is conducted. Transmitter module. This device is to be used only for mobile and fixed applications. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM must also be provided with labeling instructions.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: David Shawcross

Title of authorized signature: Technology Manager

Grants

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669

Date of Grant: 10/16/2003

Application Dated: 10/16/2003

Wavenet Technology Pty Ltd.

140 Burswood Road

Perth West Australia, 6100
Australia

Attention: Ross Clark , Design Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PQS-BM3900M

Name of Grantee:	Wavenet Technology Pty Ltd.

Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	Boomer III OEM Modem

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BB	90	896.0 - 901.0	2.0	1.5 PM	12K0F1D

Power listed is conducted. Transmitter module. This device is to be used only for mobile and fixed applications. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM must also be provided with labeling instructions.

BB:	Power output continuously variable from value listed to less than 0.5 watts.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Wavenet Technology Pty Ltd.
140 Burswood Road
Perth West Australia, 6100
Australia