FCC ID PTY-WNDCTII

Printer Server

by Silex Technology, Inc.

Grantee Code: PTY   Product Code: WNDCTII
Latest application date: 2004-01-15

FCC ID Device Details

FCC IDPTY-WNDCTII
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePTY
Product CodeWNDCTII
Applicant BusinessSilex Technology, Inc. 🇯🇵
Related Domains silex.jp ckc.com
Equipment ClassPrinter Server
Test FirmCKC Laboratories, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2401-2481 MHzOriginal Equipment2004-01-15
2401-2481 MHzOriginal Equipment2004-01-15

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2004-01-15PDF 1.2 MB
Internal PhotosInternal Photos2004-01-15PDF 287.5 KB
Internal PhotosInternal Photos2004-01-15PDF 241 KB
External PhotosExternal Photos2004-01-15PDF 166 KB
External PhotosExternal Photos2004-01-15PDF 178.5 KB
LabelID Label/Location Info2004-01-15PDF 56.5 KB
LabelID Label/Location Info2004-01-15PDF 56.4 KB
Label LocationID Label/Location Info2004-01-15PDF 92.3 KB
Label PlacementID Label/Location Info2004-01-15PDF 92.3 KB
Test Setup PhotoTest Setup Photos2004-01-15PDF 430.5 KB
Test Setup PhotosTest Setup Photos2004-01-15PDF 430.5 KB
Test ReportTest Report2004-01-15PDF 1.4 MB
Model DifferencesAttestation Statements2004-01-15PDF 46.2 KB
Model DifferencesAttestation Statements2004-01-15PDF 46.2 KB
Confidentiality LetterCover Letter(s)2004-01-15PDF 45.3 KB
Confidentiality Letterjpeg2004-01-15PDF 45.3 KB
Model Differencesjpeg2004-01-15PDF 46.2 KB
Model Differencesjpeg2004-01-15PDF 46.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 50.3 KB
Block Diagram Metadata onlyBlock DiagramPDF 50.8 KB
Schematics Metadata onlySchematicsPDF 156.2 KB
Operational Description Metadata onlyOperational DescriptionPDF 115.6 KB

Application Information

Application IDkoNIxQ477+O/lt//Us6e0w==
Final Action Date2004-01-15
Application PurposeOriginal Equipment
Applicant FRN0007165756
ModelWNDCTII
Frequency Range2401-2481 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionPrinter Server
Responsible PartyKeiji Matsumoto, Hardware Engineering Manager, matsumoto@silex.jp , +81 6-6784-3751
AgentMary Ellen Mary Ellen Mary Ellen, CKC Laboratories, Inc., reports@ckc.com , 209-966-5240
Technical ContactMary Ellen Clayton, CKC Laboratories, Inc., reports@ckc.com , 209-966-5240
Non-Technical ContactMary Ellen Clayton, CKC Laboratories, Inc., reports@ckc.com , 209-966-5240
Test FirmSteve Behm, CKC Laboratories, Inc., reports@ckc.com , 714-993-6112
TCB Emailinfo@ckccertification.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output is EIRP. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
koNIxQ477+O/lt//Us6e0w==2004-01-15Original Equipment
5g5S2zeuz9ZPSi6RriqIHQ==2004-01-15Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2401-2481 MHz0.001080015CCE
2401-2481 MHz0.000840015CCE

Grants

TCB Grant - Application koNIxQ477+O/lt//Us6e0w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CKC Certification Services, LLC
5046 Sierra Pines
Mariposa, CA 95338
Date of Grant: 01/15/2004

Application Dated: 01/15/2004
Silex Technology, Inc.
15-15 Takaida
Higashiosaka-shi,
Japan
 
Attention: Keiji Matsumoto , Hardware Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PTY-WNDCTII
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Printer Server
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2401.0  -  2481.0 0.00084  

Power output is EIRP. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application koNIxQ477+O/lt//Us6e0w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
15-15 Takaida
Higashiosaka-shi,
Japan
  Date of Grant: 01/15/2004

Application Dated: 01/15/2004
 
Attention: Keiji Matsumoto , Hardware Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PTY-WNDCTII
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Printer Server
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2401.0  -  2481.0 0.00084  

Power output is EIRP. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application 5g5S2zeuz9ZPSi6RriqIHQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CKC Certification Services, LLC
5046 Sierra Pines
Mariposa, CA 95338
Date of Grant: 01/15/2004

Application Dated: 01/15/2004
Silex Technology, Inc.
15-15 Takaida
Higashiosaka-shi,
Japan
 
Attention: Keiji Matsumoto , Hardware Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PTY-WNDCTII
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Printer Server
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2401.0  -  2481.0 0.00108  

Power output is EIRP. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application 5g5S2zeuz9ZPSi6RriqIHQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
15-15 Takaida
Higashiosaka-shi,
Japan
  Date of Grant: 01/15/2004

Application Dated: 01/15/2004
 
Attention: Keiji Matsumoto , Hardware Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PTY-WNDCTII
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Printer Server
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2401.0  -  2481.0 0.00108  

Power output is EIRP. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: