FCC ID PUBWCM1008
802.11 a/b Combo Mini PCI WLAN Module
by Philips Components
Grantee Code: PUB Product Code: WCM1008
Latest application date: 2002-10-31
FCC ID Device Details
| FCC ID | PUBWCM1008 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | PUB |
| Product Code | WCM1008 |
| Applicant Business | Philips Components 🇺🇸 |
| Related Domains |  philips.com |
| Equipment Class | 802.11 a/b Combo Mini PCI WLAN Module |
| Test Firm | Compliance Certification Services Inc |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2002-10-31 |
| 5180-5320 MHz | Original Equipment | 2002-10-31 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Revised User Manual | Users Manual | 2002-10-31 | PDF 2.6 MB |
| EUT Photos | Internal Photos | 2002-10-31 | PDF 2.2 MB |
| EUT photos | Internal Photos | 2002-10-31 | PDF 2.2 MB |
| EUT Photos | External Photos | 2002-10-31 | PDF 2.2 MB |
| EUT photos | External Photos | 2002-10-31 | PDF 2.2 MB |
| End product label format | ID Label/Location Info | 2002-10-31 | PDF 100.6 KB |
| FCC ID label format and location on Module | ID Label/Location Info | 2002-10-31 | PDF 659.9 KB |
| FCC ID label format and location on the module | ID Label/Location Info | 2002-10-31 | PDF 659.9 KB |
| DTS Radiated Setup Photos | Test Setup Photos | 2002-10-31 | PDF 390.2 KB |
| UNII Radiated Test Setup Photos | Test Setup Photos | 2002-10-31 | PDF 399.2 KB |
| Additional test plots for 6dB BW measurement | Test Report | 2002-10-31 | PDF 140 KB |
| DTS Antenna Terminal portion of Test Report | Test Report | 2002-10-31 | PDF 780.1 KB |
| DTS Radiated Test report | Test Report | 2002-10-31 | PDF 2.2 MB |
| Transmission Pulse Duration Data | Test Report | 2002-10-31 | PDF 42.5 KB |
| UNII Antenna Terminal Portion of Test Report | Test Report | 2002-10-31 | PDF 739.9 KB |
| UNII Radiated Portion of Test Report | Test Report | 2002-10-31 | PDF 2.2 MB |
| OEM Installation Procedures | Cover Letter(s) | 2002-10-31 | PDF 925.3 KB |
| OEM Installation procedures | Cover Letter(s) | 2002-10-31 | PDF 925.3 KB |
| Request for confidentiality letter | Cover Letter(s) | 2002-10-31 | PDF 19.8 KB |
| Request for module approval | Cover Letter(s) | 2002-10-31 | PDF 61.4 KB |
| Request for module approval | Cover Letter(s) | 2002-10-31 | PDF 61.4 KB |
| TCB Q and A | Cover Letter(s) | 2002-10-31 | PDF 40.7 KB |
| TCB Q and A | Cover Letter(s) | 2002-10-31 | PDF 53.2 KB |
| MPe Estimate | RF Exposure Info | 2002-10-31 | PDF 81.1 KB |
| Block Diagram Metadata only | Block Diagram | PDF 10 KB | |
| Schematic Diagram Metadata only | Schematics | PDF 710 KB | |
| Theory of operation with antenna location Metadata only | Operational Description | PDF 227.6 KB | |
| Theory of operation with antenna location information Metadata only | Operational Description | PDF 227.6 KB |
Application Information
| Application ID | UsSqDVYg5n3TcX0BFdYyKA== |
|---|---|
| Final Action Date | 2002-10-31 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0006087365 |
| Model | WCM1008 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11 a/b Combo Mini PCI WLAN Module |
| Responsible Party | Steve Shearer, steve.shearer@philips.com , 408-467-9335 |
| Agent | Steve Steve Steve, Compliance Certification Services, scheng@ccsemc.com  , 408-463-0885 |
| Test Firm | Steve Cheng, Compliance Certification Services Inc, scheng@ccsemc.com , 408-463-0885 |
| TCB Email | mkuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmiter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to Notebook OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device and comply with integral antenna requirements. This device must be marketed for indoor use only. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| UsSqDVYg5n3TcX0BFdYyKA== | 2002-10-31 | Original Equipment |
| 4SrYT27Y/l2GJT3Ke9Cvgg== | 2002-10-31 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application UsSqDVYg5n3TcX0BFdYyKA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 10/31/2002 Application Dated: 10/31/2002 |
| Philips Components |
| 1962 Zanker Road |
| San Jose, CA 95112 |
| Attention: Steve Shearer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PUBWCM1008 |
| Name of Grantee: | Philips Components |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b Combo Mini PCI WLAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.042 | |||
| 15C | 5745.0 - 5825.0 | 0.039 |
| Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmiter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to Notebook OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device and comply with integral antenna requirements. This device must be marketed for indoor use only. |
EAS Grant - Application UsSqDVYg5n3TcX0BFdYyKA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Philips Components 1962 Zanker Road San Jose, CA 95112 United States |
Date of Grant: 10/31/2002 Application Dated: 10/31/2002 |
| Attention: Steve Shearer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PUBWCM1008 |
| Name of Grantee: | Philips Components |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b Combo Mini PCI WLAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.042 | |||
| 15C | 5745.0 - 5825.0 | 0.039 |
| Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmiter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to Notebook OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device and comply with integral antenna requirements. This device must be marketed for indoor use only. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 10/31/2002 Application Dated: 10/31/2002 |
| Philips Components |
| 1962 Zanker Road |
| San Jose, CA 95112 |
| Attention: Steve Shearer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PUBWCM1008 |
| Name of Grantee: | Philips Components |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b Combo Mini PCI WLAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5180.0 - 5320.0 | 0.0466 |
| Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmiter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to Notebook OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device and comply with integral antenna requirements. This device must be marketed for indoor use only. |
EAS Grant - Application 4SrYT27Y/l2GJT3Ke9Cvgg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Philips Components 1962 Zanker Road San Jose, CA 95112 United States |
Date of Grant: 10/31/2002 Application Dated: 10/31/2002 |
| Attention: Steve Shearer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PUBWCM1008 |
| Name of Grantee: | Philips Components |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b Combo Mini PCI WLAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5180.0 - 5320.0 | 0.0466 |
| Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmiter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to Notebook OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device and comply with integral antenna requirements. This device must be marketed for indoor use only. |
| Mail To: |