FCC ID PUBWCM1010
802.11 a/b/g Mini PCI Module
by Philips Components
Grantee Code: PUB Product Code: WCM1010
Latest application date: 2003-08-28
FCC ID Device Details
| FCC ID | PUBWCM1010 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | PUB |
| Product Code | WCM1010 |
| Applicant Business | Philips Components 🇺🇸 |
| Related Domains |  philips.com |
| Equipment Class | 802.11 a/b/g Mini PCI Module |
| Test Firm | Compliance Certification Services Inc |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2003-08-28 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2003-08-28 |
| 5180-5240 MHz | Original Equipment | 2003-07-21 |
| 2412-2462 MHz | Original Equipment | 2003-07-21 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2003-07-21 | PDF 1.9 MB |
| Antenna location | Internal Photos | 2003-08-28 | PDF 1.4 MB |
| Antenna location photos | Internal Photos | 2003-08-28 | PDF 1.4 MB |
| Internal Photos | Internal Photos | 2003-08-28 | PDF 844.1 KB |
| Internal photos | Internal Photos | 2003-08-28 | PDF 844.1 KB |
| Internal Photos | Internal Photos | 2003-07-21 | PDF 129.6 KB |
| External Photos | External Photos | 2003-08-28 | PDF 664.2 KB |
| External Photos | External Photos | 2003-07-21 | PDF 106.4 KB |
| FCC ID label format and location | ID Label/Location Info | 2003-07-21 | PDF 129.5 KB |
| Test Setup Photos | Test Setup Photos | 2003-08-28 | PDF 335.6 KB |
| Test setup photo | Test Setup Photos | 2003-08-28 | PDF 335.6 KB |
| Test Setup Photos | Test Setup Photos | 2003-07-21 | PDF 294.1 KB |
| Test Setup Photos | Test Setup Photos | 2003-07-21 | PDF 294.1 KB |
| Test Report | Test Report | 2003-08-28 | PDF 2.2 MB |
| Test Report | Test Report | 2003-08-28 | PDF 1.8 MB |
| DTS Test Report 1 of 2 | Test Report | 2003-07-21 | PDF 2.6 MB |
| DTS Test Report 2 of 2 | Test Report | 2003-07-21 | PDF 3.5 MB |
| UNII Test report 1 of 2 | Test Report | 2003-07-21 | PDF 2.1 MB |
| UNII Test report 2 of 2 | Test Report | 2003-07-21 | PDF 1 MB |
| Class II permissive change | Cover Letter(s) | 2003-08-28 | PDF 14.6 KB |
| Class II permissive change letter | Cover Letter(s) | 2003-08-28 | PDF 14.6 KB |
| OEM Installation statement | Cover Letter(s) | 2003-07-21 | PDF 813.6 KB |
| OEM installation statement | Cover Letter(s) | 2003-07-21 | PDF 813.6 KB |
| Request for confidentiality letter | Cover Letter(s) | 2003-07-21 | PDF 194.5 KB |
| Request for module approval | Cover Letter(s) | 2003-07-21 | PDF 6.9 KB |
| Rquest for confidential letter | Cover Letter(s) | 2003-07-21 | PDF 194.5 KB |
| Antenna Specification | Parts List/Tune Up Info | 2003-08-28 | PDF 149.3 KB |
| Antenna Specification | Parts List/Tune Up Info | 2003-07-21 | PDF 284.1 KB |
| Antenna specification | Parts List/Tune Up Info | 2003-07-21 | PDF 284.1 KB |
| MPE Estimate | RF Exposure Info | 2003-07-21 | PDF 13.8 KB |
| Block Diagram Metadata only | Block Diagram | PDF 43.5 KB | |
| Schematic Diagram Metadata only | Schematics | PDF 731.2 KB | |
| Operational description Metadata only | Operational Description | PDF 71.5 KB | |
| Theory of operation Metadata only | Operational Description | PDF 71.5 KB |
Application Information
| Application ID | pt3b3secdy5JZscBtUi5ng== |
|---|---|
| Final Action Date | 2003-08-28 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006087365 |
| Model | WCM1010 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11 a/b/g Mini PCI Module |
| Responsible Party | Steve Shearer, steve.shearer@philips.com , 408-467-9335 |
| Agent | Steve Steve Steve, Compliance Certification Services, scheng@ccsemc.com  , 408-463-0885 |
| Test Firm | Steve Cheng, Compliance Certification Services Inc, scheng@ccsemc.com , 408-463-0885 |
| TCB Email | mkuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change filing with 0 dBi ceramic dual band antenna. The output power in 802.11g operation shall not exceed 0.042 W. Output power listed is conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device and comply with integral antenna requirements. This device must be marketed for indoor use only. The antenna(s) used for this transmiter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| pt3b3secdy5JZscBtUi5ng== | 2003-08-28 | Class II permissive change or modification of presently authorized equipment |
| ANIiSXPYid1Zt95n2KM1iA== | 2003-08-28 | Class II permissive change or modification of presently authorized equipment |
| TH32zbf3t2f3KNT+j3JFqw== | 2003-07-21 | Original Equipment |
| KiwMFgaKikuYDX2IVansYQ== | 2003-07-21 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application TH32zbf3t2f3KNT+j3JFqw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 07/21/2003 Application Dated: 07/21/2003 |
| Philips Components |
| 1962 Zanker Road |
| San Jose, CA 95112 |
| Attention: Steve Shearer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PUBWCM1010 |
| Name of Grantee: | Philips Components |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g Mini-PCI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15E | 5180.0 - 5240.0 | 0.073 | ||
| CE | 15E | 5260.0 - 5320.0 | 0.073 |
| Modular approval. Output power listed is conducted. This device must utilize a BIOS lock mechanism which ensures use only with 15" LCD type antenna as specified in the Certification Filing. This grant is valid only when the device is sold to Notebook OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device and comply with integral antenna requirements. This device must be marketed for indoor use only. The antenna(s) used for this transmiter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application TH32zbf3t2f3KNT+j3JFqw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Philips Components 1962 Zanker Road San Jose, CA 95112 United States |
Date of Grant: 07/21/2003 Application Dated: 07/21/2003 |
| Attention: Steve Shearer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PUBWCM1010 |
| Name of Grantee: | Philips Components |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g Mini-PCI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15E | 5180.0 - 5240.0 | 0.073 | ||
| CE | 15E | 5260.0 - 5320.0 | 0.073 |
| Modular approval. Output power listed is conducted. This device must utilize a BIOS lock mechanism which ensures use only with 15" LCD type antenna as specified in the Certification Filing. This grant is valid only when the device is sold to Notebook OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device and comply with integral antenna requirements. This device must be marketed for indoor use only. The antenna(s) used for this transmiter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/28/2003 Application Dated: 08/28/2003 |
| Philips Components |
| 1962 Zanker Road |
| San Jose, CA 95112 |
| Attention: Steve Shearer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PUBWCM1010 |
| Name of Grantee: | Philips Components |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g Mini PCI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CE | 15C | 2412.0 - 2462.0 | 0.114 | ||
| CE | 15C | 5745.0 - 5825.0 | 0.111 |
| Class II permissive change filing with 0 dBi ceramic dual band antenna. The output power in 802.11g operation shall not exceed 0.042 W. Output power listed is conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device and comply with integral antenna requirements. This device must be marketed for indoor use only. The antenna(s) used for this transmiter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application pt3b3secdy5JZscBtUi5ng==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Philips Components 1962 Zanker Road San Jose, CA 95112 United States |
Date of Grant: 08/28/2003 Application Dated: 08/28/2003 |
| Attention: Steve Shearer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PUBWCM1010 |
| Name of Grantee: | Philips Components |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g Mini PCI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CE | 15C | 2412.0 - 2462.0 | 0.114 | ||
| CE | 15C | 5745.0 - 5825.0 | 0.111 |
| Class II permissive change filing with 0 dBi ceramic dual band antenna. The output power in 802.11g operation shall not exceed 0.042 W. Output power listed is conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device and comply with integral antenna requirements. This device must be marketed for indoor use only. The antenna(s) used for this transmiter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 07/21/2003 Application Dated: 07/21/2003 |
| Philips Components |
| 1962 Zanker Road |
| San Jose, CA 95112 |
| Attention: Steve Shearer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PUBWCM1010 |
| Name of Grantee: | Philips Components |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g Mini-PCI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.114 | ||
| CE | 15C | 5745.0 - 5825.0 | 0.111 |
| Modular approval. Output power listed is conducted. This device must utilize a BIOS lock mechanism which ensures use only with 15" LCD type antenna as specified in the Certification Filing. This grant is valid only when the device is sold to Notebook OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device and comply with integral antenna requirements. This device must be marketed for indoor use only. The antenna(s) used for this transmiter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application KiwMFgaKikuYDX2IVansYQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Philips Components 1962 Zanker Road San Jose, CA 95112 United States |
Date of Grant: 07/21/2003 Application Dated: 07/21/2003 |
| Attention: Steve Shearer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PUBWCM1010 |
| Name of Grantee: | Philips Components |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g Mini-PCI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.114 | ||
| CE | 15C | 5745.0 - 5825.0 | 0.111 |
| Modular approval. Output power listed is conducted. This device must utilize a BIOS lock mechanism which ensures use only with 15" LCD type antenna as specified in the Certification Filing. This grant is valid only when the device is sold to Notebook OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device and comply with integral antenna requirements. This device must be marketed for indoor use only. The antenna(s) used for this transmiter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/28/2003 Application Dated: 08/28/2003 |
| Philips Components |
| 1962 Zanker Road |
| San Jose, CA 95112 |
| Attention: Steve Shearer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PUBWCM1010 |
| Name of Grantee: | Philips Components |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g Mini PCI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15E | 5180.0 - 5240.0 | 0.073 | ||
| CE | 15E | 5260.0 - 5320.0 | 0.073 |
| Class II permissive change filing with 0 dBi ceramic dual band antenna. Output power listed is conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device and comply with integral antenna requirements. This device must be marketed for indoor use only. The antenna(s) used for this transmiter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application ANIiSXPYid1Zt95n2KM1iA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Philips Components 1962 Zanker Road San Jose, CA 95112 United States |
Date of Grant: 08/28/2003 Application Dated: 08/28/2003 |
| Attention: Steve Shearer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PUBWCM1010 |
| Name of Grantee: | Philips Components |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g Mini PCI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15E | 5180.0 - 5240.0 | 0.073 | ||
| CE | 15E | 5260.0 - 5320.0 | 0.073 |
| Class II permissive change filing with 0 dBi ceramic dual band antenna. Output power listed is conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device and comply with integral antenna requirements. This device must be marketed for indoor use only. The antenna(s) used for this transmiter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: |