FCC ID PV3WFSGW

Wireless Gateway

by Honeywell International Inc.

Grantee Code: PV3   Product Code: WFSGW
Latest application date: 2017-08-18

FCC ID Device Details

FCC IDPV3WFSGW
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePV3
Product CodeWFSGW
Applicant BusinessHoneywell International Inc. 🇺🇸
Related Domains honeywell.com
Equipment ClassWireless Gateway
Test FirmAdemco Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
903.55-926.45 MHzClass II permissive change or modification of presently authorized equipment2017-08-18
902.875-927.125 MHzClass II permissive change or modification of presently authorized equipment2017-08-18
903.55-926.45 MHzOriginal Equipment2013-12-31
902.875-927.125 MHzOriginal Equipment2013-12-31

Exhibits

DocumentTypeAvailableFile
Exhibit D Users Manual per 2 1033 b3Users Manual2014-06-25PDF 3.2 MB
Exhibit C Internal Photographs per 2 1033 b7Internal Photos2014-06-25PDF 187.7 KB
Exhibit C External Photographs per 2 1033 b7External Photos2014-06-25PDF 40.2 KB
Exhibit A ID Label and location per 2 1033 b7ID Label/Location Info2013-12-31PDF 134.2 KB
Exhibit C RE Test Setup photographsTest Setup Photos2014-06-25PDF 1.6 MB
Exhibit E Test Measurement Report per 2 1033 b6Test Report2013-12-31PDF 4 MB
Cover Letter Requesting Class II Permissive ChangeCover Letter(s)2017-08-18PDF 29.2 KB
Cover Letter Requesting ConfidentialityCover Letter(s)2013-12-31PDF 25.9 KB

Application Information

Application IDoUl59780PR5qisKuEA0qSg==
Final Action Date2017-08-18
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0012490835
ModelWFSGW
Frequency Range903.55-926.45 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionWireless Gateway
Responsible PartyJonathan Potter, Senior Engineering Manager, Jonathan.Potter@Honeywell.com , 203-484-6405
Technical ContactJonathan Potter, HONEYWELL INTERNATIONAL, INC., jonathan.potter@honeywell.com , 2034841200
Non-Technical ContactJonathan Potter, HONEYWELL INTERNATIONAL, INC., jonathan.potter@honeywell.com , 2034841200
Test FirmMichael Antola, Ademco Inc., michael.antola@resideo.com , 516-577-5820
TCB Emailreking@elitetest.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date02/14/2018
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
oUl59780PR5qisKuEA0qSg==2017-08-18Class II permissive change or modification of presently authorized equipment
6t0S03FoFEH+fiNvKX56Bw==2017-08-18Class II permissive change or modification of presently authorized equipment
reP2RkYJyPs/umDs1yc8BQ==2013-12-31Original Equipment
d/wuQGcCOWjmC8M9CAJyIw==2013-12-31Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
902.875-927.125 MHz0.016000015CCC
903.55-926.45 MHz0.050000015CCC

Grants

TCB Grant - Application reP2RkYJyPs/umDs1yc8BQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 12/31/2013

Application Dated: 12/31/2013
Honeywell International Inc.
Honeywell Fire Safety Americas
12 Clintonville Road
Northford, CT 06472
 
Attention: Jonathan Potter , Senior Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PV3WFSGW
Name of Grantee:  Honeywell International Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Gateway
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 903.55  -  926.45 0.05  

Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application reP2RkYJyPs/umDs1yc8BQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Honeywell International Inc.
Honeywell Fire Safety Americas 12 Clintonville Road
Northford, CT 06472
United States
  Date of Grant: 12/31/2013

Application Dated: 12/31/2013
 
Attention: Jonathan Potter , Senior Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PV3WFSGW
Name of Grantee:  Honeywell International Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Gateway
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 903.55  -  926.45 0.05  

Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application oUl59780PR5qisKuEA0qSg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 08/18/2017

Application Dated: 08/18/2017
Honeywell International Inc.
Honeywell Fire Safety Americas
12 Clintonville Road
Northford, CT 06472
 
Attention: Jonathan Potter , Senior Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PV3WFSGW
Name of Grantee:  Honeywell International Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Gateway
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 903.55  -  926.45 0.05  

Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application oUl59780PR5qisKuEA0qSg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Honeywell International Inc.
Honeywell Fire Safety Americas 12 Clintonville Road
Northford, CT 06472
United States
  Date of Grant: 08/18/2017

Application Dated: 08/18/2017
 
Attention: Jonathan Potter , Senior Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PV3WFSGW
Name of Grantee:  Honeywell International Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Gateway
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 903.55  -  926.45 0.05  

Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application d/wuQGcCOWjmC8M9CAJyIw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 12/31/2013

Application Dated: 12/31/2013
Honeywell International Inc.
Honeywell Fire Safety Americas
12 Clintonville Road
Northford, CT 06472
 
Attention: Jonathan Potter , Senior Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PV3WFSGW
Name of Grantee:  Honeywell International Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Gateway
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 902.875  -  927.125 0.016  

Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application d/wuQGcCOWjmC8M9CAJyIw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Honeywell International Inc.
Honeywell Fire Safety Americas 12 Clintonville Road
Northford, CT 06472
United States
  Date of Grant: 12/31/2013

Application Dated: 12/31/2013
 
Attention: Jonathan Potter , Senior Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PV3WFSGW
Name of Grantee:  Honeywell International Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Gateway
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 902.875  -  927.125 0.016  

Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 6t0S03FoFEH+fiNvKX56Bw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 08/18/2017

Application Dated: 08/18/2017
Honeywell International Inc.
Honeywell Fire Safety Americas
12 Clintonville Road
Northford, CT 06472
 
Attention: Jonathan Potter , Senior Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PV3WFSGW
Name of Grantee:  Honeywell International Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Gateway
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 902.875  -  927.125 0.016  

Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 6t0S03FoFEH+fiNvKX56Bw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Honeywell International Inc.
Honeywell Fire Safety Americas 12 Clintonville Road
Northford, CT 06472
United States
  Date of Grant: 08/18/2017

Application Dated: 08/18/2017
 
Attention: Jonathan Potter , Senior Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PV3WFSGW
Name of Grantee:  Honeywell International Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Gateway
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 902.875  -  927.125 0.016  

Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: