FCC ID PV7-WIBEAR-I

The Lesswire industrial universal 802.11 a/b/g WLAN + Bluetooth 2.1 module is targeted for integration into different products of OEM partners enabling them to communicate over WLAN and Bluetooth connection.

by u-blox AG

Grantee Code: PV7   Product Code: WIBEARI
Latest application date: 2011-01-13

FCC ID Device Details

FCC IDPV7-WIBEAR-I
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePV7
Product CodeWIBEARI
Applicant Businessu-blox AG 🇨🇭
Related Domains lesswire.com
Equipment ClassThe Lesswire industrial universal 802.11 a/b/g WLAN + Bluetooth 2.1 module is targeted for integration into different products of OEM partners enabling them to communicate over WLAN and Bluetooth connection.
Test FirmEurofins Product Service GmbH

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2011-01-13
5180-5240 MHzOriginal Equipment2011-01-13

Exhibits

DocumentTypeAvailableFile
UserManUsers Manual2011-01-13PDF 354.6 KB
IntPhoInternal Photos2011-01-13PDF 510.9 KB
ExtPhoExternal Photos2011-01-13PDF 510.9 KB
LabelLocID Label/Location Info2011-01-13PDF 888.2 KB
LabelSmplID Label/Location Info2011-01-13PDF 132 KB
TestSupTest Setup Photos2011-01-13PDF 361.1 KB
TestRep BTTest Report2011-01-13PDF 1.7 MB
TestRep UNIITest Report2011-01-13PDF 2 MB
TestRep WLANTest Report2011-01-13PDF 1.9 MB
MA LetterAttestation Statements2011-01-13PDF 108.7 KB
AutLetCover Letter(s)2011-01-13PDF 427.6 KB
ConReqCover Letter(s)2011-01-13PDF 1.3 MB
Correspondence statementCover Letter(s)2011-01-13PDF 584.5 KB
RF ExpRF Exposure Info2011-01-13PDF 18.1 KB

Application Information

Application IDO0GU5OOSDiD7XVfY0v4l3A==
Final Action Date2011-01-13
Application PurposeOriginal Equipment
Applicant FRN0004378865
Model-WIBEAR-I
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionThe Lesswire industrial universal 802.11 a/b/g WLAN + Bluetooth 2.1 module is targeted for integration into different products of OEM partners enabling them to communicate over WLAN and Bluetooth connection.
Responsible PartyRalph Meyfarth, meyfarth@lesswire.com , +49 30 6392
Technical ContactIgor Shevchenko, lesswire AG, shevchenko@lesswire.com , +49 30 6392
Non-Technical ContactAndreas Beierer, lesswire AG, beierer@lesswire.com , +49 30 6392
Test FirmJorg Kusig, Eurofins Product Service GmbH, joergkusig@eurofins.de , 49-33631-888-700
TCB EmailJoergKusig@eurofins.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
O0GU5OOSDiD7XVfY0v4l3A==2011-01-13Original Equipment
9nO4v7y5A8QONlp/hLznSg==2011-01-13Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.003515CCC
2412-2462 MHz0.09215CCC
5180-5240 MHz0.03415ECC, ND
5260-5320 MHz0.03315ECC, ND
5500-5700 MHz0.02615ECC, ND

Grants

TCB Grant - Application O0GU5OOSDiD7XVfY0v4l3A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 01/13/2011

Application Dated: 01/13/2011
u-blox AG
Zuercherstrasse 68
Thalwil, CH-8800
Swaziland
 
Attention: Giulio Comar , Certification Manger

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PV7-WIBEAR-I
Name of Grantee:  u-blox AG
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: The Lesswire industrial universal 802.11 a/b/g WLAN + Bluetooth 2.1 module is targeted for integration into different products of OEM partners enabling them to communicate over WLAN and Bluetooth connection.
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0035  
CC 15C 2412.0  -  2462.0 0.092  

Limited Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application O0GU5OOSDiD7XVfY0v4l3A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
Zuercherstrasse 68
Thalwil, CH-8800
Swaziland
  Date of Grant: 01/13/2011

Application Dated: 01/13/2011
 
Attention: Giulio Comar , Certification Manger

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PV7-WIBEAR-I
Name of Grantee:  u-blox AG
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: The Lesswire industrial universal 802.11 a/b/g WLAN + Bluetooth 2.1 module is targeted for integration into different products of OEM partners enabling them to communicate over WLAN and Bluetooth connection.
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0035  
CC 15C 2412.0  -  2462.0 0.092  

Limited Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 9nO4v7y5A8QONlp/hLznSg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 01/13/2011

Application Dated: 01/13/2011
u-blox AG
Zuercherstrasse 68
Thalwil, CH-8800
Swaziland
 
Attention: Giulio Comar , Certification Manger

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PV7-WIBEAR-I
Name of Grantee:  u-blox AG
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: The Lesswire industrial universal 802.11 a/b/g WLAN + Bluetooth 2.1 module is targeted for integration into different products of OEM partners enabling them to communicate over WLAN and Bluetooth connection.
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC ND 15E 5180.0  -  5240.0 0.034  
CC ND 15E 5260.0  -  5320.0 0.033  
CC ND 15E 5500.0  -  5700.0 0.026  

Limited Modular Approval. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application 9nO4v7y5A8QONlp/hLznSg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
Zuercherstrasse 68
Thalwil, CH-8800
Swaziland
  Date of Grant: 01/13/2011

Application Dated: 01/13/2011
 
Attention: Giulio Comar , Certification Manger

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PV7-WIBEAR-I
Name of Grantee:  u-blox AG
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: The Lesswire industrial universal 802.11 a/b/g WLAN + Bluetooth 2.1 module is targeted for integration into different products of OEM partners enabling them to communicate over WLAN and Bluetooth connection.
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC ND 15E 5180.0  -  5240.0 0.034  
CC ND 15E 5260.0  -  5320.0 0.033  
CC ND 15E 5500.0  -  5700.0 0.026  

Limited Modular Approval. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: