FCC ID PVH000501

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432

Date of Grant: 11/20/2001 Application Dated: 11/20/2001

u-blox Malmo AB

Ostra Varvsgatan 4, 5tr

MALMO, SE-211 75 Sweden

Attention: Filip Kruzela , Certification Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PVH000501
Name of Grantee:	u-blox Malmo AB
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Bluetooth Serial Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0  -  2480.0	0.008

The listed output power represents the measured EIRP of the device. This modular transmitter is approved for use with devices that satisfy the mobile operating requirements of Section 2.1091. For portable operating configurations, as defined in Section 2.1093, if the device or its antenna(s) may operate in contact with a persons body (excluding hands, wrists, feet and ankles), then neither the total peak conducted nor peak radiated (EIRP) output power of all transmitters, whether this module is integrated internally or attached directly to a device operating with it, may exceed 5 mW. For all other portable operating configurations, neither the total peak conducted nor peak radiated (EIRP) output power from all transmitters operating with a device using this module, whether this module is integrated internally or attached directly to a device operating with it, may exceed 10 mW. The Grantee must inform second manufacturers/installers that in order for this module to be operated in any configuration other than that permitted in the preceding sentences, a separate FCC equipment authorization must be obtained for each device into which this module is installed. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. If the Grantee does not provide an antenna with this module, it may not be sold to the end- user, but may be sold to a second manufacturer/installer. Instructions must be provided by the Grantee to the second manufacturer/installer that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used, and it complies with the requirements of Section 15.203 (i.e., has either a permanently attached antenna or utilizes a unique connector). Compliance of this module in its final configuration is the responsibility of the Grantee. If the second manufacturer/installer desires to use an antenna with this module that has not been previously approved for use with it, then the Grantee must file a Class II permissive change to approve the new antenna with the module. Alternatively, the second manufacturer/installer may obtain a separate FCC equipment authorization for the module and the new antenna. If the second manufacturer/installer markets a device that does not comply with the Grantees instructions for antenna configuration without having obtained a separate FCC equipment authorization for the module and new antenna configuration, that device will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden

Date of Grant: 11/20/2001 Application Dated: 11/20/2001

Attention: Filip Kruzela , Certification Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PVH000501
Name of Grantee:	u-blox Malmo AB
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Bluetooth Serial Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0  -  2480.0	0.008

The listed output power represents the measured EIRP of the device. This modular transmitter is approved for use with devices that satisfy the mobile operating requirements of Section 2.1091. For portable operating configurations, as defined in Section 2.1093, if the device or its antenna(s) may operate in contact with a persons body (excluding hands, wrists, feet and ankles), then neither the total peak conducted nor peak radiated (EIRP) output power of all transmitters, whether this module is integrated internally or attached directly to a device operating with it, may exceed 5 mW. For all other portable operating configurations, neither the total peak conducted nor peak radiated (EIRP) output power from all transmitters operating with a device using this module, whether this module is integrated internally or attached directly to a device operating with it, may exceed 10 mW. The Grantee must inform second manufacturers/installers that in order for this module to be operated in any configuration other than that permitted in the preceding sentences, a separate FCC equipment authorization must be obtained for each device into which this module is installed. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. If the Grantee does not provide an antenna with this module, it may not be sold to the end- user, but may be sold to a second manufacturer/installer. Instructions must be provided by the Grantee to the second manufacturer/installer that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used, and it complies with the requirements of Section 15.203 (i.e., has either a permanently attached antenna or utilizes a unique connector). Compliance of this module in its final configuration is the responsibility of the Grantee. If the second manufacturer/installer desires to use an antenna with this module that has not been previously approved for use with it, then the Grantee must file a Class II permissive change to approve the new antenna with the module. Alternatively, the second manufacturer/installer may obtain a separate FCC equipment authorization for the module and the new antenna. If the second manufacturer/installer markets a device that does not comply with the Grantees instructions for antenna configuration without having obtained a separate FCC equipment authorization for the module and new antenna configuration, that device will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application H+aRb4YR38uA9CpOEGzTYw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432

Date of Grant: 11/20/2001 Application Dated: 11/20/2001

u-blox Malmo AB

Ostra Varvsgatan 4, 5tr

MALMO, SE-211 75 Sweden

Attention: Filip Kruzela , Certification Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PVH000501
Name of Grantee:	u-blox Malmo AB
Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	Bluetooth Serial Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15B	-

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden

Date of Grant: 11/20/2001 Application Dated: 11/20/2001

Attention: Filip Kruzela , Certification Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PVH000501
Name of Grantee:	u-blox Malmo AB
Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	Bluetooth Serial Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15B	-

CC:	This device is certified pursuant to two different Part 15 rules sections.

Mail To: