FCC ID PVH070201
Bluetooth module cB-0702-01
by u-blox Malmo AB
Grantee Code: PVH Product Code: 070201
Latest application date: 2004-12-01
FCC ID Device Details
| FCC ID | PVH070201 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | PVH |
| Product Code | 070201 |
| Applicant Business | u-blox Malmo AB 🇸🇪 |
| Related Domains |  u-blox.com |
| Equipment Class | Bluetooth module cB-0702-01 |
| Test Firm | Phoenix TestLab GmbH |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2004-12-01 |
| 2402-2480 MHz | Original Equipment | 2003-04-14 |
| 2402-2480 MHz | Original Equipment | 2003-04-07 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2003-04-14 | PDF 287.5 KB |
| Users Manual Metadata only | Users Manual | PDF 777.9 KB | |
| Internal Photo Bottom | Internal Photos | 2003-04-14 | PDF 147.4 KB |
| Internal Photo Top | Internal Photos | 2003-04-14 | PDF 212.4 KB |
| Internal Photos Bottom Metadata only | Internal Photos | PDF 147.4 KB | |
| Internal Photos Top Metadata only | Internal Photos | PDF 212.4 KB | |
| External Photo with omni antenna data | External Photos | 2004-12-01 | PDF 981.7 KB |
| External Photo with patch antenna data | External Photos | 2004-12-01 | PDF 951.3 KB |
| External Photo Bottom | External Photos | 2003-04-14 | PDF 147.4 KB |
| External Photo Top | External Photos | 2003-04-14 | PDF 212.4 KB |
| External Photos Top Metadata only | External Photos | PDF 212.4 KB | |
| Label Info OEM | ID Label/Location Info | 2003-04-14 | PDF 13.7 KB |
| Label Information | ID Label/Location Info | 2003-04-14 | PDF 15.7 KB |
| Datasheet | Operational Description | 2003-04-14 | PDF 287.5 KB |
| Technical Description Metadata only | Operational Description | PDF 777.9 KB | |
| Test Setup Photos | Test Setup Photos | 2004-12-01 | PDF 608.7 KB |
| Test Setup Photos 1 | Test Setup Photos | 2003-04-14 | PDF 198.8 KB |
| Test Setup Photos 2 | Test Setup Photos | 2003-04-14 | PDF 161.7 KB |
| Test Setup Photos Metadata only | Test Setup Photos | PDF 198.8 KB | |
| Test Report | Test Report | 2004-12-01 | PDF 693.5 KB |
| Antenna Data 1 | Test Report | 2003-04-14 | PDF 1.2 MB |
| Antenna Data 2 | Test Report | 2003-04-14 | PDF 156.6 KB |
| Antenna Data 3 | Test Report | 2003-04-14 | PDF 436.3 KB |
| Antenna Data 4 | Test Report | 2003-04-14 | PDF 116.5 KB |
| Antenna Data 5 | Test Report | 2003-04-14 | PDF 100.2 KB |
| Antenna Data Overview | Test Report | 2003-04-14 | PDF 9.8 KB |
| Data Sheet Glue | Test Report | 2003-04-14 | PDF 22 KB |
| Test Report | Test Report | 2003-04-14 | PDF 1 MB |
| Test Report Statements | Test Report | 2003-04-14 | PDF 234 KB |
| Antenna Data Metadata only | Test Report | PDF 1.2 MB | |
| Antenna Overview Metadata only | Test Report | PDF 9.8 KB | |
| Test Report BT Statement Metadata only | Test Report | PDF 234 KB | |
| Agency Letter | Attestation Statements | 2003-04-14 | PDF 789.7 KB |
| Request Modular Approval | Attestation Statements | 2003-04-14 | PDF 27.2 KB |
| Request for Confidentiality | Attestation Statements | 2003-04-14 | PDF 152.2 KB |
| Cover Letter | Cover Letter(s) | 2004-12-01 | PDF 1.2 MB |
| Agency Letter | Cover Letter(s) | PDF 28.3 KB | |
| Request Modular Approval | Cover Letter(s) | PDF 27.1 KB | |
| Request for Confidentiality | Cover Letter(s) | PDF 774.4 KB | |
| RF Exposure Info | RF Exposure Info | 2003-04-14 | PDF 13.7 KB |
| Block Diagram Metadata only | Block Diagram | PDF 15.1 KB | |
| Schematics Metadata only | Schematics | PDF 65.6 KB | |
| PCB Layout Metadata only | Parts List/Tune Up Info | PDF 664.3 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 4.1 KB |
Application Information
| Application ID | RxDgSP9yXOkaGa4RP2j6+A== |
|---|---|
| Final Action Date | 2004-12-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008568446 |
| Model | 070201 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Bluetooth module cB-0702-01 |
| Responsible Party | Filip Kruzela, Certification Manager, filip.kruzela@u-blox.com , +46 40 6307100 |
| Agent | Wilfried Wilfried Wilfried, PHOENIX TESTLAB GmbH, Meier.Wilfried@phoenix-testlab.de  |
| Test Firm | H. Altmaier, Phoenix TestLab GmbH, office@phoenix-testlab.de , 49-5235-9500-0 |
| TCB Email | gerald.schmidt@ict.cetecom.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | This PCII adds two antennas to previous filing.Output power is conducted. Limited Modular approval. Intended for OEM integration only. This device cannot be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091 as defined below. This device and its antenna must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The grantee also must provide OEM integrators with installation and operating instructions for satisfying RF exposure requirements. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Use of different antennas requires a Class II permissive change. Instructions must be provided by the Grantee to the OEM that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used, and it complies with the requirements of Section 15.203 (i.e., has either a permanently attached antenna or utilizes a unique connector)and to satisfy RF exposure requirements. Compliance of this module in its final configuration is the responsibility of the Grantee. Separate approval is required for portable configurations with respect to 2.1093. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| RxDgSP9yXOkaGa4RP2j6+A== | 2004-12-01 | Class II permissive change or modification of presently authorized equipment |
| moW/jxCp4k0sPj7SQFERoQ== | 2003-04-14 | Original Equipment |
| w3k3aeVi/1gzYvIvIP0vhw== | 2003-04-07 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0312000 | 15C |
Grants
TCB Grant - Application w3k3aeVi/1gzYvIvIP0vhw==
This application does not exist.
EAS Grant - Application w3k3aeVi/1gzYvIvIP0vhw==
This application currently is not in final status.
TCB Grant - Application RxDgSP9yXOkaGa4RP2j6+A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 12/01/2004 Application Dated: 12/01/2004 |
| u-blox Malmo AB |
| Ostra Varvsgatan 4, 5tr |
| MALMO, SE-211 75 Sweden |
| Attention: Filip Kruzela , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH070201 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth module cB-0702-01 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0312 |
| This PCII adds two antennas to previous filing.Output power is conducted. Limited Modular approval. Intended for OEM integration only. This device cannot be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091 as defined below. This device and its antenna must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The grantee also must provide OEM integrators with installation and operating instructions for satisfying RF exposure requirements. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Use of different antennas requires a Class II permissive change. Instructions must be provided by the Grantee to the OEM that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used, and it complies with the requirements of Section 15.203 (i.e., has either a permanently attached antenna or utilizes a unique connector)and to satisfy RF exposure requirements. Compliance of this module in its final configuration is the responsibility of the Grantee. Separate approval is required for portable configurations with respect to 2.1093. |
EAS Grant - Application RxDgSP9yXOkaGa4RP2j6+A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden |
Date of Grant: 12/01/2004 Application Dated: 12/01/2004 |
| Attention: Filip Kruzela , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH070201 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth module cB-0702-01 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0312 |
| This PCII adds two antennas to previous filing.Output power is conducted. Limited Modular approval. Intended for OEM integration only. This device cannot be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091 as defined below. This device and its antenna must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The grantee also must provide OEM integrators with installation and operating instructions for satisfying RF exposure requirements. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Use of different antennas requires a Class II permissive change. Instructions must be provided by the Grantee to the OEM that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used, and it complies with the requirements of Section 15.203 (i.e., has either a permanently attached antenna or utilizes a unique connector)and to satisfy RF exposure requirements. Compliance of this module in its final configuration is the responsibility of the Grantee. Separate approval is required for portable configurations with respect to 2.1093. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 04/14/2003 Application Dated: 04/14/2003 |
| u-blox Malmo AB |
| Ostra Varvsgatan 4, 5tr |
| MALMO, SE-211 75 Sweden |
| Attention: Filip Kruzela , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH070201 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth module cB-0702-01 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0312 |
| Output power is conducted. Limited Modular approval. Intended for OEM integration only. This device cannot be sold to the General Public. This is an OEM module approved for use in products operating as a mobile and portable transmitting device with respect to 2.1091 and 2.1093 as defined below. This device and its antenna must operate with a separation distance of at least 2.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The grantee also must provide OEM integrators with installation and operating instructions for satisfying RF exposure requirements. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Use of different antennas requires a Class II permissive change. Instructions must be provided by the Grantee to the OEM that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used, and it complies with the requirements of Section 15.203 (i.e., has either a permanently attached antenna or utilizes a unique connector)and to satisfy RF exposure requirements. Compliance of this module in its final configuration is the responsibility of the Grantee. Separate approval is required for all other operating configurations than described above, including portable configurations with respect to 2.1093. |
EAS Grant - Application moW/jxCp4k0sPj7SQFERoQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden |
Date of Grant: 04/14/2003 Application Dated: 04/14/2003 |
| Attention: Filip Kruzela , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH070201 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth module cB-0702-01 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0312 |
| Output power is conducted. Limited Modular approval. Intended for OEM integration only. This device cannot be sold to the General Public. This is an OEM module approved for use in products operating as a mobile and portable transmitting device with respect to 2.1091 and 2.1093 as defined below. This device and its antenna must operate with a separation distance of at least 2.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The grantee also must provide OEM integrators with installation and operating instructions for satisfying RF exposure requirements. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Use of different antennas requires a Class II permissive change. Instructions must be provided by the Grantee to the OEM that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used, and it complies with the requirements of Section 15.203 (i.e., has either a permanently attached antenna or utilizes a unique connector)and to satisfy RF exposure requirements. Compliance of this module in its final configuration is the responsibility of the Grantee. Separate approval is required for all other operating configurations than described above, including portable configurations with respect to 2.1093. |
| Mail To: |