FCC ID PVH090103AP
Wireless Communication System Module
by u-blox Malmo AB
Grantee Code: PVH Product Code: 090103AP
Latest application date: 2009-02-03
FCC ID Device Details
| FCC ID | PVH090103AP |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | PVH |
| Product Code | 090103AP |
| Applicant Business | u-blox Malmo AB 🇸🇪 |
| Related Domains |  u-blox.com |
| Equipment Class | Wireless Communication System Module |
| Test Firm | PHOENIX TESTLAB GmbH |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2009-02-03 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2007-08-14 |
| 2402-2480 MHz | Original Equipment | 2006-05-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Integration Manual I | Users Manual | 2009-02-03 | PDF 774.9 KB |
| Integration Manual II | Users Manual | 2009-02-03 | PDF 950.6 KB |
| Integration Manual Host | Users Manual | 2006-05-17 | PDF 73.3 KB |
| Users Manual Host | Users Manual | 2006-05-17 | PDF 1 MB |
| Internal Photos | Internal Photos | 2009-02-03 | PDF 2.5 MB |
| Interne Photos | Internal Photos | 2006-05-17 | PDF 941.4 KB |
| External Photos | External Photos | 2009-02-03 | PDF 1.1 MB |
| Externe Photos | External Photos | 2006-05-17 | PDF 941.4 KB |
| ID Lable Location Info | ID Label/Location Info | 2006-05-17 | PDF 71.3 KB |
| OPerational Description | Operational Description | 2009-02-03 | PDF 252.8 KB |
| Operational Description I | Operational Description | 2007-08-14 | PDF 72.5 KB |
| Operational Description II | Operational Description | 2007-08-14 | PDF 107.9 KB |
| Antenna Datasheet | Operational Description | 2006-05-17 | PDF 786.1 KB |
| Operational Description | Operational Description | 2006-05-17 | PDF 7.1 KB |
| Test Setup Photos | Test Setup Photos | 2009-02-03 | PDF 2.5 MB |
| Test Setup Photos | Test Setup Photos | 2007-08-14 | PDF 3.4 MB |
| Test Setup Photos | Test Setup Photos | 2006-05-17 | PDF 1.4 MB |
| Test Report | Test Report | 2009-02-03 | PDF 616.1 KB |
| Test Report | Test Report | 2007-08-14 | PDF 479.7 KB |
| Test Report | Test Report | 2006-05-17 | PDF 1.2 MB |
| Request for Class II Change | Cover Letter(s) | 2009-02-03 | PDF 106.1 KB |
| Class II Change letter | Cover Letter(s) | 2007-08-14 | PDF 35.4 KB |
| Request For Confidentiality | Cover Letter(s) | 2006-05-17 | PDF 109.6 KB |
| Request LMA | Cover Letter(s) | 2006-05-17 | PDF 146.6 KB |
| Block Diagram Metadata only | Block Diagram | PDF 165.6 KB | |
| Schematics Metadata only | Schematics | PDF 101.5 KB |
Application Information
| Application ID | bNlbL7Xm+ZhOiLLLLloPIw== |
|---|---|
| Final Action Date | 2009-02-03 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008568446 |
| Model | 090103AP |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Wireless Communication System Module |
| Responsible Party | Mats Andersson, CTO, mats.andersson@u-blox.com , +46 40 6307100 |
| Test Firm | Holger Bentje, PHOENIX TESTLAB GmbH, office@phoenix-testlab.de  , 49-5235-9500-24 |
| TCB Email | Brandhorst.dirk@phoenix-testlab.de |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Limited Modular Approval. This is an OEM modular transmitter approved for use only in the specific mobile transmitting device subject for professional installation as described in the filing. Compliance of this module in its final configuration is the responsibility of the Grantee. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. Class II Permissive Change adds an additional antenna togehter with a specific mobile transmitting device subject for professional installation as described in the filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| bNlbL7Xm+ZhOiLLLLloPIw== | 2009-02-03 | Class II permissive change or modification of presently authorized equipment |
| Aqs8NMdMv1bEOaDv8nz5SA== | 2007-08-14 | Class II permissive change or modification of presently authorized equipment |
| P6X4+6r7cw0LkpysENWAjA== | 2006-05-17 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0282000 | 15C |
Grants
TCB Grant - Application P6X4+6r7cw0LkpysENWAjA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 05/17/2006 Application Dated: 05/17/2006 |
| u-blox Malmo AB |
| Ostra Varvsgatan 4, 5tr |
| MALMO, SE-211 75 Sweden |
| Attention: Filip Kruzela , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH090103AP |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0282 |
| Output power listed is conducted. Limited Modular Approval. This is an OEM modular transmitter approved for use only in the specific mobile transmitting device subject for professional installation as described in the filing. Compliance of this module in its final configuration is the responsibility of the Grantee. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. |
EAS Grant - Application P6X4+6r7cw0LkpysENWAjA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden |
Date of Grant: 05/17/2006 Application Dated: 05/17/2006 |
| Attention: Filip Kruzela , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH090103AP |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0282 |
| Output power listed is conducted. Limited Modular Approval. This is an OEM modular transmitter approved for use only in the specific mobile transmitting device subject for professional installation as described in the filing. Compliance of this module in its final configuration is the responsibility of the Grantee. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 02/03/2009 Application Dated: 02/03/2009 |
| u-blox Malmo AB |
| Ostra Varvsgatan 4, 5tr |
| MALMO, SE-211 75 Sweden |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH090103AP |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0282 |
| Output power listed is conducted. Limited Modular Approval. This is an OEM modular transmitter approved for use only in the specific mobile transmitting device subject for professional installation as described in the filing. Compliance of this module in its final configuration is the responsibility of the Grantee. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. Class II Permissive Change adds an additional antenna togehter with a specific mobile transmitting device subject for professional installation as described in the filing.
|
EAS Grant - Application bNlbL7Xm+ZhOiLLLLloPIw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden |
Date of Grant: 02/03/2009 Application Dated: 02/03/2009 |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH090103AP |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0282 |
| Output power listed is conducted. Limited Modular Approval. This is an OEM modular transmitter approved for use only in the specific mobile transmitting device subject for professional installation as described in the filing. Compliance of this module in its final configuration is the responsibility of the Grantee. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. Class II Permissive Change adds an additional antenna togehter with a specific mobile transmitting device subject for professional installation as described in the filing.
|
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany | Date of Grant: 08/14/2007 Application Dated: 08/14/2007 |
| u-blox Malmo AB |
| Ostra Varvsgatan 4, 5tr |
| MALMO, SE-211 75 Sweden |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH090103AP |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Communication Systen Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0282 |
| Output power listed is conducted. Limited Modular Approval. This is an OEM modular transmitter approved for use only in the specific mobile transmitting device subject for professional installation as described in the filing. Compliance of this module in its final configuration is the responsibility of the Grantee. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. |
EAS Grant - Application Aqs8NMdMv1bEOaDv8nz5SA==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden | Date of Grant: 08/14/2007 Application Dated: 08/14/2007 |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH090103AP |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Communication Systen Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0282 |
| Output power listed is conducted. Limited Modular Approval. This is an OEM modular transmitter approved for use only in the specific mobile transmitting device subject for professional installation as described in the filing. Compliance of this module in its final configuration is the responsibility of the Grantee. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers.
|
| Mail To: |
| EA720864 |