FCC ID PVH0926
Wireless Communication System Module
by u-blox Malmo AB
Grantee Code: PVH Product Code: 0926
Latest application date: 2017-02-20
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2017-02-20 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-11 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2013-05-22 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2010-08-31 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2010-08-31 |
| 5180-5240 MHz | Original Equipment | 2009-12-22 |
| 2412-2462 MHz | Original Equipment | 2009-12-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual HOST | Users Manual | 2010-08-31 | PDF 1.1 MB |
| Users Manual Host | Users Manual | 2010-08-31 | PDF 1.1 MB |
| Internal Photos HOST | Internal Photos | 2010-08-31 | PDF 2.2 MB |
| Internal Photos Host | Internal Photos | 2010-08-31 | PDF 2.2 MB |
| Internal Photos | Internal Photos | 2009-12-22 | PDF 4.5 MB |
| Internal Photos | Internal Photos | 2009-12-22 | PDF 4.5 MB |
| External Photos HOST | External Photos | 2010-08-31 | PDF 491.9 KB |
| External Photos Host | External Photos | 2010-08-31 | PDF 513.4 KB |
| External Photos | External Photos | 2009-12-22 | PDF 4.5 MB |
| External Photos | External Photos | 2009-12-22 | PDF 4.5 MB |
| Label | ID Label/Location Info | 2009-12-22 | PDF 102.4 KB |
| Label Info | ID Label/Location Info | 2009-12-22 | PDF 102.4 KB |
| Operational Description | Operational Description | 2009-12-22 | PDF 32.4 KB |
| Test Set Up 1 | Test Setup Photos | 2013-05-22 | PDF 735.7 KB |
| Test Set Up 2 | Test Setup Photos | 2013-05-22 | PDF 873.5 KB |
| Test Setup Photos | Test Setup Photos | 2010-08-31 | PDF 2 MB |
| Test Setup Photos | Test Setup Photos | 2010-08-31 | PDF 2 MB |
| Test Setup Photos | Test Setup Photos | 2009-12-22 | PDF 3.5 MB |
| Test Setup Photos | Test Setup Photos | 2009-12-22 | PDF 2.7 MB |
| 15E Test Report | Test Report | 2013-05-22 | PDF 2.5 MB |
| DFS Report | Test Report | 2013-05-22 | PDF 1.3 MB |
| Antenna Report | Test Report | 2010-08-31 | PDF 519.5 KB |
| Test Report | Test Report | 2010-08-31 | PDF 624.5 KB |
| Test Report | Test Report | 2010-08-31 | PDF 768.6 KB |
| Test Report | Test Report | 2009-12-22 | PDF 1.6 MB |
| Test Report | Test Report | 2009-12-22 | PDF 1.8 MB |
| Client Frequeny Plan Declaration | Attestation Statements | 2013-05-22 | PDF 70.5 KB |
| Client Non Associated Mode Declaration | Attestation Statements | 2013-05-22 | PDF 123.6 KB |
| Software Configuration Control Declaration | Attestation Statements | 2013-05-22 | PDF 130.3 KB |
| Class II Change letter | Cover Letter(s) | 2017-02-20 | PDF 256.1 KB |
| PoA | Cover Letter(s) | 2017-02-20 | PDF 74.5 KB |
| Class II letter | Cover Letter(s) | 2016-05-11 | PDF 56.5 KB |
| Agency Form | Cover Letter(s) | 2013-05-22 | PDF 123.8 KB |
| Confidentiality Request | Cover Letter(s) | 2013-05-22 | PDF 133.1 KB |
| Permissive Change Request | Cover Letter(s) | 2013-05-22 | PDF 161 KB |
| Antenna Info | Cover Letter(s) | 2010-08-31 | PDF 253 KB |
| Antenna Info | Cover Letter(s) | 2010-08-31 | PDF 1.5 MB |
| Class II Change Request | Cover Letter(s) | 2010-08-31 | PDF 234.4 KB |
| Ad-Hoc Mode Declaration | Cover Letter(s) | 2009-12-22 | PDF 32.9 KB |
| Ad-Hoc mode Statement | Cover Letter(s) | 2009-12-22 | PDF 32.9 KB |
| Antenna Info | Cover Letter(s) | 2009-12-22 | PDF 453.8 KB |
| Antenna Info | Cover Letter(s) | 2009-12-22 | PDF 561.3 KB |
| Confidential Request | Cover Letter(s) | 2009-12-22 | PDF 33.2 KB |
| Modular Approval | Cover Letter(s) | 2009-12-22 | PDF 48.3 KB |
| Modular Approval Letter | Cover Letter(s) | 2009-12-22 | PDF 48.3 KB |
| Request for Confidential | Cover Letter(s) | 2009-12-22 | PDF 33.2 KB |
| MPE Calculation | RF Exposure Info | 2009-12-22 | PDF 55.4 KB |
| RF Exposure Info | RF Exposure Info | 2009-12-22 | PDF 56.5 KB |
| Software Security device Metadata only | Operational Description | PDF 154.1 KB |
Application Information
| Application ID | IzC+Ovvce3I6QEDi4ORJyA== |
|---|---|
| Final Action Date | 2017-02-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008568446 |
| Model | 0926 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Wireless Communication System Module |
| Responsible Party | Filip Kruzela, Certification Manager, filip.kruzela@u-blox.com  , +46 40 6307100 |
| Test Firm | Darren Rust, UL VS Ltd, darren.rust@ul.com  , +44 1256 31 2119 |
| TCB Email | Khalek.Yassine@phoenix-testlab.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change updates to UNII New Rules. Output power listed is conducted. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This OEM module is approved for use in products operating as mobile transmitting device and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with multi TX policy. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Client device per section 15.202 definition with no radar detection. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| IzC+Ovvce3I6QEDi4ORJyA== | 2017-02-20 | Class II permissive change or modification of presently authorized equipment |
| aK70tAzjFWjt5UnHjZwKNg== | 2016-05-11 | Class II permissive change or modification of presently authorized equipment |
| B998fI28MZ3m+hOocpWMWw== | 2013-05-22 | Class II permissive change or modification of presently authorized equipment |
| Gnd2WbuxY95trbOJUPskNg== | 2010-08-31 | Class II permissive change or modification of presently authorized equipment |
| 8KQo1y9qK0Y1Xb12IsUxNg== | 2010-08-31 | Class II permissive change or modification of presently authorized equipment |
| Rdp0go598T1gDwJW/bbGWw== | 2009-12-22 | Original Equipment |
| 2/g2bJInYgp3TZ1bRGdXWA== | 2009-12-22 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Rdp0go598T1gDwJW/bbGWw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 12/22/2009 Application Dated: 12/22/2009 |
| u-blox Malmo AB |
| Ostra Varvsgatan 4, 5tr |
| MALMO, SE-211 75 Sweden |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0926 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0223 |
| Output power listed is conducted. Limited Modular Approval. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Rdp0go598T1gDwJW/bbGWw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden |
Date of Grant: 12/22/2009 Application Dated: 12/22/2009 |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0926 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0223 |
| Output power listed is conducted. Limited Modular Approval. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 02/20/2017 Application Dated: 02/20/2017 |
| u-blox Malmo AB |
| Ostra Varvsgatan 4, 5tr |
| MALMO, SE-211 75 Sweden |
| Attention: Filip Kruzela , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0926 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0223 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0074 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.0078 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0085 |
| Class II Permissive Change updates to UNII New Rules. Output power listed is conducted. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This OEM module is approved for use in products operating as mobile transmitting device and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with multi TX policy. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Client device per section 15.202 definition with no radar detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application IzC+Ovvce3I6QEDi4ORJyA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden |
Date of Grant: 02/20/2017 Application Dated: 02/20/2017 |
| Attention: Filip Kruzela , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0926 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0223 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0074 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.0078 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0085 |
| Class II Permissive Change updates to UNII New Rules. Output power listed is conducted. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This OEM module is approved for use in products operating as mobile transmitting device and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with multi TX policy. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Client device per section 15.202 definition with no radar detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 08/31/2010 Application Dated: 08/31/2010 |
| u-blox Malmo AB |
| Ostra Varvsgatan 4, 5tr |
| MALMO, SE-211 75 Sweden |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0926 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0223 |
| Output power listed is conducted. Limited Modular Approval. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. This Class II Permissive Change filings adds two antennas and integration of the RF Module into specific host device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Gnd2WbuxY95trbOJUPskNg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden |
Date of Grant: 08/31/2010 Application Dated: 08/31/2010 |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0926 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0223 |
| Output power listed is conducted. Limited Modular Approval. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. This Class II Permissive Change filings adds two antennas and integration of the RF Module into specific host device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL VS Ltd Unit 3 Horizon, Wade Road, Kingsland Business Park, Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 05/22/2013 Application Dated: 05/22/2013 |
| u-blox Malmo AB |
| Ostra Varvsgatan 4, 5tr |
| MALMO, SE-211 75 Sweden |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0926 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0223 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0074 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.0078 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0085 |
| Output power listed is conducted. Limited Modular Approval. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. Permissive Change to add additional UNII bands. Client device per section 15.202 definition with no radar detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application B998fI28MZ3m+hOocpWMWw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden |
Date of Grant: 05/22/2013 Application Dated: 05/22/2013 |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0926 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0223 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0074 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.0078 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0085 |
| Output power listed is conducted. Limited Modular Approval. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. Permissive Change to add additional UNII bands. Client device per section 15.202 definition with no radar detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 05/11/2016 Application Dated: 05/11/2016 |
| u-blox Malmo AB |
| Ostra Varvsgatan 4, 5tr |
| MALMO, SE-211 75 Sweden |
| Attention: Filip Kruzela , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0926 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0955 |
| Class II Permissive Change to deactivate the 5GHZ bands capability by Software to allow continuing marketing after UNII transition period. Output power listed is conducted. Limited Modular Approval. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This Class II Permissive Change filings adds two antennas and integration of the RF Module into specific host device. |
EAS Grant - Application aK70tAzjFWjt5UnHjZwKNg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden |
Date of Grant: 05/11/2016 Application Dated: 05/11/2016 |
| Attention: Filip Kruzela , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0926 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0955 |
| Class II Permissive Change to deactivate the 5GHZ bands capability by Software to allow continuing marketing after UNII transition period. Output power listed is conducted. Limited Modular Approval. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This Class II Permissive Change filings adds two antennas and integration of the RF Module into specific host device. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 08/31/2010 Application Dated: 08/31/2010 |
| u-blox Malmo AB |
| Ostra Varvsgatan 4, 5tr |
| MALMO, SE-211 75 Sweden |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0926 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0955 |
| Output power listed is conducted. Limited Modular Approval. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This Class II Permissive Change filings adds two antennas and integration of the RF Module into specific host device.
|
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 8KQo1y9qK0Y1Xb12IsUxNg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden |
Date of Grant: 08/31/2010 Application Dated: 08/31/2010 |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0926 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0955 |
| Output power listed is conducted. Limited Modular Approval. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This Class II Permissive Change filings adds two antennas and integration of the RF Module into specific host device.
|
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 12/22/2009 Application Dated: 12/22/2009 |
| u-blox Malmo AB |
| Ostra Varvsgatan 4, 5tr |
| MALMO, SE-211 75 Sweden |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0926 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0955 |
| Output power listed is conducted. Limited Modular Approval. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 2/g2bJInYgp3TZ1bRGdXWA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden |
Date of Grant: 12/22/2009 Application Dated: 12/22/2009 |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0926 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0955 |
| Output power listed is conducted. Limited Modular Approval. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |