FCC ID PVH0941
Wireless Communication System Module
by u-blox Malmo AB
Grantee Code: PVH Product Code: 0941
Latest application date: 2016-05-18
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-18 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2013-06-25 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2013-06-25 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2013-05-23 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2013-02-22 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2013-02-22 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2011-11-22 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2011-05-20 |
| 2412-2462 MHz | Original Equipment | 2011-05-17 |
| 5180-5240 MHz | Original Equipment | 2011-05-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2013-06-25 | PDF 2.9 MB |
| Antenna Guide | Users Manual | 2013-02-22 | PDF 1,005.3 KB |
| Users Manual | Users Manual | 2011-11-22 | PDF 3.3 MB |
| Electrical and Mechaniocal Datasheet | Users Manual | 2011-05-20 | PDF 2.9 MB |
| Electrical and Mechanical Datasheet | Users Manual | 2011-05-17 | PDF 2.7 MB |
| Internal Photos | Internal Photos | 2013-06-25 | PDF 3.1 MB |
| Int Photos | Internal Photos | 2013-02-22 | PDF 1.9 MB |
| int photos | Internal Photos | 2013-02-22 | PDF 1.9 MB |
| Internal Photos | Internal Photos | 2011-05-17 | PDF 2.8 MB |
| External Photos | External Photos | 2013-06-25 | PDF 2.8 MB |
| Ext photos | External Photos | 2013-02-22 | PDF 343.8 KB |
| ext photos | External Photos | 2013-02-22 | PDF 343.1 KB |
| External Photos | External Photos | 2011-05-17 | PDF 2.8 MB |
| Photo of external antenna InSide EPA 2400_WLAN | External Photos | 2011-05-17 | PDF 100.9 KB |
| Photo of external antenna Mobile Mark SDM2-2400-1575 | External Photos | 2011-05-17 | PDF 273.3 KB |
| ID Label/Location Info | ID Label/Location Info | 2011-05-17 | PDF 1.5 MB |
| Antenna Info | Operational Description | 2013-06-25 | PDF 401.8 KB |
| EX-IT 2400 MHF 70-001 Antenna Datasheet | Operational Description | 2011-05-20 | PDF 242.8 KB |
| Ex-IT 2400-MHF 28-001 Antenna Datasheet | Operational Description | 2011-05-20 | PDF 285.8 KB |
| Ex-IT 2400-RP-SMA 28-001 Antenna Datasheet | Operational Description | 2011-05-20 | PDF 215.2 KB |
| Ex-IT 2400-RP-SMA 70-002 Antenna Datasheet | Operational Description | 2011-05-20 | PDF 345.6 KB |
| NanoBlue-IP04 Antenna Datasheet | Operational Description | 2011-05-20 | PDF 223 KB |
| Outside 2400 Antenna Datasheet | Operational Description | 2011-05-20 | PDF 178.1 KB |
| PSTG0-2400HS Antenna Datasheet | Operational Description | 2011-05-20 | PDF 52.8 KB |
| PlanTec m70cxr Antenna Datasheet | Operational Description | 2011-05-20 | PDF 103 KB |
| WCR-2400-IP04 Antenna Datasheet | Operational Description | 2011-05-20 | PDF 255.2 KB |
| WCR-2400-RPSMA Antenna Datasheet | Operational Description | 2011-05-20 | PDF 436.3 KB |
| Ex-IT WLAN RPSMA antenna data sheet | Operational Description | 2011-05-17 | PDF 249.1 KB |
| Ex-IT WLAN RPSMA antenna datasheet | Operational Description | 2011-05-17 | PDF 249.1 KB |
| FR05-S1-NO-1-004 antenna data sheet | Operational Description | 2011-05-17 | PDF 106.1 KB |
| FR05-S1-NO-1-004 antenna datasheet | Operational Description | 2011-05-17 | PDF 106.1 KB |
| Flatwhip 2400 RPSMA antenna data sheet | Operational Description | 2011-05-17 | PDF 198.8 KB |
| InSide WLAN antenna data sheet | Operational Description | 2011-05-17 | PDF 252.8 KB |
| InSide WLAN antenna datasheet | Operational Description | 2011-05-17 | PDF 252.8 KB |
| InSide-EPA 2400 antenna data sheet | Operational Description | 2011-05-17 | PDF 253 KB |
| InSide-EPA WLAN (5GHz) antenna datasheet | Operational Description | 2011-05-17 | PDF 519.5 KB |
| R380 500 125 antenna data sheet | Operational Description | 2011-05-17 | PDF 99.5 KB |
| R380 500 139 antenna data sheet | Operational Description | 2011-05-17 | PDF 90 KB |
| SDM2-2400/1575 antenna data sheet | Operational Description | 2011-05-17 | PDF 97.7 KB |
| Test setup photos | Test Setup Photos | 2013-06-25 | PDF 257 KB |
| Test Set Up | Test Setup Photos | 2013-05-23 | PDF 663.1 KB |
| Test Setup photos | Test Setup Photos | 2013-02-22 | PDF 2.2 MB |
| test setup photos | Test Setup Photos | 2013-02-22 | PDF 2.3 MB |
| AC Mains CE Test Set Up Photo | Test Setup Photos | 2011-05-17 | PDF 93.9 KB |
| RSE Test Set Up Photo | Test Setup Photos | 2011-05-17 | PDF 321.8 KB |
| Test Report | Test Report | 2013-05-23 | PDF 1.2 MB |
| Test Report | Test Report | 2013-02-22 | PDF 356.3 KB |
| test report | Test Report | 2013-02-22 | PDF 369.8 KB |
| Test Report 1 | Test Report | 2011-11-22 | PDF 512.9 KB |
| Test Report 2 Part a | Test Report | 2011-11-22 | PDF 3 MB |
| Test Report 2 Part b | Test Report | 2011-11-22 | PDF 3.3 MB |
| Test Report 3 | Test Report | 2011-11-22 | PDF 2.7 MB |
| Test Report 4 | Test Report | 2011-11-22 | PDF 2.7 MB |
| Test Report 5 | Test Report | 2011-11-22 | PDF 2.7 MB |
| Test Report Part 1 | Test Report | 2011-05-20 | PDF 4.7 MB |
| Test Report Part 2 | Test Report | 2011-05-20 | PDF 4.4 MB |
| Test Report 1 Part 1 | Test Report | 2011-05-17 | PDF 5.3 MB |
| Test Report 1 Part 2 | Test Report | 2011-05-17 | PDF 2.4 MB |
| Test Report 2 | Test Report | 2011-05-17 | PDF 2.1 MB |
| Test Report 3 | Test Report | 2011-05-17 | PDF 2.8 MB |
| Test Report No 1 | Test Report | 2011-05-17 | PDF 3.7 MB |
| Test Report No 2 | Test Report | 2011-05-17 | PDF 892.4 KB |
| Test Report No 3 | Test Report | 2011-05-17 | PDF 3.4 MB |
| Software Configuration Control | Attestation Statements | 2013-05-23 | PDF 57.2 KB |
| Ad Hoc Declaration | Attestation Statements | 2011-11-22 | PDF 87.9 KB |
| Declaration of Software Control | Attestation Statements | 2011-11-22 | PDF 84.7 KB |
| Compliance Statement Ad-hoc mode | Attestation Statements | 2011-05-17 | PDF 44.4 KB |
| Part 15 Modular Transmitter Approval Request | Attestation Statements | 2011-05-17 | PDF 37.2 KB |
| Pat 15 Modular Transmitter Approval Request | Attestation Statements | 2011-05-17 | PDF 37.2 KB |
| Class II lEtter | Cover Letter(s) | 2016-05-18 | PDF 58.4 KB |
| LTC Request | Cover Letter(s) | 2016-05-18 | PDF 58 KB |
| Compliance Opinion | Cover Letter(s) | 2013-06-25 | PDF 21.1 KB |
| Cover letter | Cover Letter(s) | 2013-06-25 | PDF 53.2 KB |
| Agency Form | Cover Letter(s) | 2013-05-23 | PDF 123.8 KB |
| Confidentiality Request | Cover Letter(s) | 2013-05-23 | PDF 133.2 KB |
| Permissive Change Request | Cover Letter(s) | 2013-05-23 | PDF 159.2 KB |
| Class II Letter | Cover Letter(s) | 2013-02-22 | PDF 31.6 KB |
| LTC request | Cover Letter(s) | 2013-02-22 | PDF 64 KB |
| class II letter | Cover Letter(s) | 2013-02-22 | PDF 31.6 KB |
| Agency Form | Cover Letter(s) | 2011-11-22 | PDF 44.3 KB |
| Channel Plan | Cover Letter(s) | 2011-11-22 | PDF 100.6 KB |
| Confidentiality Request | Cover Letter(s) | 2011-11-22 | PDF 44.6 KB |
| Permissive Change Request | Cover Letter(s) | 2011-11-22 | PDF 53 KB |
| Agency Letter | Cover Letter(s) | 2011-05-20 | PDF 44.3 KB |
| Request for Class II permissive change | Cover Letter(s) | 2011-05-20 | PDF 45.9 KB |
| Confidentiality Request | Cover Letter(s) | 2011-05-17 | PDF 45 KB |
| SAR Report part 1 of 2 | RF Exposure Info | 2013-06-25 | PDF 1.8 MB |
| SAR Report part 2 of 2 | RF Exposure Info | 2013-06-25 | PDF 5.5 MB |
| Calculation | RF Exposure Info | 2013-02-22 | PDF 21.8 KB |
| MPE Calculation | RF Exposure Info | 2011-05-17 | PDF 37.8 KB |
| Restricted use Agreement Metadata only | SDR Software/Security Inf | PDF 36.1 KB | |
| Software security Metadata only | SDR Software/Security Inf | PDF 74.8 KB |
Application Information
| Application ID | rVvILorXRUqJN8v7vQIYGA== |
|---|---|
| Final Action Date | 2016-05-18 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008568446 |
| Model | 0941 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Wireless Communication System Module |
| Responsible Party | Filip Kruzela, Certification Manager, filip.kruzela@u-blox.com  , +46 40 6307100 |
| Test Firm | Darren Rust, UL VS Ltd, darren.rust@ul.com  , +44 1256 31 2119 |
| TCB Email | Khalek.Yassine@phoenix-testlab.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC updates to new UNII rules. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. Operation of this device is restricted to indoor use. PC to add additional operating frequency bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. PC to add additional 5745 to 5825 MHz frequency band. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| rVvILorXRUqJN8v7vQIYGA== | 2016-05-18 | Class II permissive change or modification of presently authorized equipment |
| wR4faduCH2Q8rBWd8gIbCQ== | 2013-06-25 | Class II permissive change or modification of presently authorized equipment |
| 3J6zR7ZFn85QEIsm9Qj7/g== | 2013-06-25 | Class II permissive change or modification of presently authorized equipment |
| JntRBHLA74QchgWJoKquOA== | 2013-05-23 | Class II permissive change or modification of presently authorized equipment |
| YGmd7pK1Y7GE6+V5mHz/wQ== | 2013-02-22 | Class II permissive change or modification of presently authorized equipment |
| OBri5+jNrCZwGRpOPP62ww== | 2013-02-22 | Class II permissive change or modification of presently authorized equipment |
| LeMwC2jiKJiqhjSfi8Q+eA== | 2011-11-22 | Class II permissive change or modification of presently authorized equipment |
| nZcChfizo2p+w6tPuJaN9A== | 2011-05-20 | Class II permissive change or modification of presently authorized equipment |
| JviMfHLoS3a9H4iEYBdVmA== | 2011-05-17 | Original Equipment |
| E59PegM75+RWAAt6Gvwh+Q== | 2011-05-17 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application YGmd7pK1Y7GE6+V5mHz/wQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 02/22/2013 Application Dated: 02/22/2013 |
| u-blox Malmo AB |
| Ostra Varvsgatan 4, 5tr |
| MALMO, SE-211 75 Sweden |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0941 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Communication System Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0087 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.006 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.009 |
| Power Output listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. Operation of this device in the 5150 MHz to 5250 MHz frequency band is restricted to indoor use only as per the requirements of 15.407(e). Class II permissive change adds new antennas. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application YGmd7pK1Y7GE6+V5mHz/wQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden |
Date of Grant: 02/22/2013 Application Dated: 02/22/2013 |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0941 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Communication System Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0087 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.006 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.009 |
| Power Output listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. Operation of this device in the 5150 MHz to 5250 MHz frequency band is restricted to indoor use only as per the requirements of 15.407(e). Class II permissive change adds new antennas. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 06/25/2013 Application Dated: 06/25/2013 |
| u-blox Malmo AB |
| Ostra Varvsgatan 4, 5tr |
| MALMO, SE-211 75 Sweden |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0941 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0087 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.006 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.009 |
| Power Output listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. Operation of this device in the 5150 MHz to 5250 MHz frequency band is restricted to indoor use only as per the requirements of 15.407(e). Class II permissive change to the grant issued on 02/22/2013. This filing adds a portable exposure condition. Body-worn accessories are restricted to the integral belt clip tested for this filing. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: DTS 0.55 W/kg, NII 0.54 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application wR4faduCH2Q8rBWd8gIbCQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden |
Date of Grant: 06/25/2013 Application Dated: 06/25/2013 |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0941 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0087 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.006 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.009 |
| Power Output listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. Operation of this device in the 5150 MHz to 5250 MHz frequency band is restricted to indoor use only as per the requirements of 15.407(e). Class II permissive change to the grant issued on 02/22/2013. This filing adds a portable exposure condition. Body-worn accessories are restricted to the integral belt clip tested for this filing. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: DTS 0.55 W/kg, NII 0.54 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 05/18/2016 Application Dated: 05/18/2016 |
| u-blox Malmo AB |
| Ostra Varvsgatan 4, 5tr |
| MALMO, SE-211 75 Sweden |
| Attention: Filip Kruzela , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0941 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Communication System Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0087 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.006 | ||
| 38 CC | 15E | 5500.0 - 5700.0 | 0.009 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.007 |
| C2PC updates to new UNII rules. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. Operation of this device is restricted to indoor use. PC to add additional operating frequency bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. PC to add additional 5745 to 5825 MHz frequency band. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application rVvILorXRUqJN8v7vQIYGA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden |
Date of Grant: 05/18/2016 Application Dated: 05/18/2016 |
| Attention: Filip Kruzela , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0941 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Communication System Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0087 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.006 | ||
| 38 CC | 15E | 5500.0 - 5700.0 | 0.009 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.007 |
| C2PC updates to new UNII rules. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. Operation of this device is restricted to indoor use. PC to add additional operating frequency bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. PC to add additional 5745 to 5825 MHz frequency band. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 02/22/2013 Application Dated: 02/22/2013 |
| u-blox Malmo AB |
| Ostra Varvsgatan 4, 5tr |
| MALMO, SE-211 75 Sweden |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0941 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.055 |
| Power Output listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. Class II permissive change adds new antennas. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application OBri5+jNrCZwGRpOPP62ww==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden |
Date of Grant: 02/22/2013 Application Dated: 02/22/2013 |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0941 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.055 |
| Power Output listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. Class II permissive change adds new antennas. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL VS Ltd Unit 3 Horizon, Wade Road, Kingsland Business Park, Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 05/20/2011 Application Dated: 05/20/2011 |
| u-blox Malmo AB |
| Ostra Varvsgatan 4, 5tr |
| MALMO, SE-211 75 Sweden |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0941 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.055 |
| Single Modular Approval. Power Output listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. Class II Permissive Change to allow additional antennas as listed in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application nZcChfizo2p+w6tPuJaN9A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden |
Date of Grant: 05/20/2011 Application Dated: 05/20/2011 |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0941 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.055 |
| Single Modular Approval. Power Output listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. Class II Permissive Change to allow additional antennas as listed in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL VS Ltd Unit 3 Horizon, Wade Road, Kingsland Business Park, Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 11/22/2011 Application Dated: 11/22/2011 |
| u-blox Malmo AB |
| Ostra Varvsgatan 4, 5tr |
| MALMO, SE-211 75 Sweden |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0941 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Communication Sytem Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0087 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.006 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.009 |
| Single Modular Approval. Power Output listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. Operation of this device in the 5150 MHz to 5250 MHz frequency band is restricted to indoor use only as per the requirements of 15.407(e). PC to add additional operating frequency bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application LeMwC2jiKJiqhjSfi8Q+eA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden |
Date of Grant: 11/22/2011 Application Dated: 11/22/2011 |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0941 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Communication Sytem Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0087 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.006 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.009 |
| Single Modular Approval. Power Output listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. Operation of this device in the 5150 MHz to 5250 MHz frequency band is restricted to indoor use only as per the requirements of 15.407(e). PC to add additional operating frequency bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL VS Ltd Unit 3 Horizon, Wade Road, Kingsland Business Park, Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 05/17/2011 Application Dated: 05/17/2011 |
| u-blox Malmo AB |
| Ostra Varvsgatan 4, 5tr |
| MALMO, SE-211 75 Sweden |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0941 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.055 |
| Single Modular Approval. Power Output listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application JviMfHLoS3a9H4iEYBdVmA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden |
Date of Grant: 05/17/2011 Application Dated: 05/17/2011 |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0941 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.055 |
| Single Modular Approval. Power Output listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL VS Ltd Unit 3 Horizon, Wade Road, Kingsland Business Park, Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 05/23/2013 Application Dated: 05/23/2013 |
| u-blox Malmo AB |
| Ostra Varvsgatan 4, 5tr |
| MALMO, SE-211 75 Sweden |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0941 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Communication System Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0087 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.006 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.009 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.007 |
| Single Modular Approval. Power Output listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. Operation of this device in the 5150 MHz to 5250 MHz frequency band is restricted to indoor use only as per the requirements of 15.407(e). PC to add additional operating frequency bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. PC to add additional 5745 to 5825 MHz frequency band. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application JntRBHLA74QchgWJoKquOA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden |
Date of Grant: 05/23/2013 Application Dated: 05/23/2013 |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0941 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Communication System Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0087 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.006 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.009 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.007 |
| Single Modular Approval. Power Output listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. Operation of this device in the 5150 MHz to 5250 MHz frequency band is restricted to indoor use only as per the requirements of 15.407(e). PC to add additional operating frequency bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. PC to add additional 5745 to 5825 MHz frequency band. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL VS Ltd Unit 3 Horizon, Wade Road, Kingsland Business Park, Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 05/17/2011 Application Dated: 05/17/2011 |
| u-blox Malmo AB |
| Ostra Varvsgatan 4, 5tr |
| MALMO, SE-211 75 Sweden |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0941 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Communication System Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0087 |
| Single Modular Approval. Power Output listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. Operation of this device in the 5150 MHz to 5250 MHz frequency band is restricted to indoor use only as per the requirements of 15.407(e). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application E59PegM75+RWAAt6Gvwh+Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden |
Date of Grant: 05/17/2011 Application Dated: 05/17/2011 |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0941 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Communication System Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0087 |
| Single Modular Approval. Power Output listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. Operation of this device in the 5150 MHz to 5250 MHz frequency band is restricted to indoor use only as per the requirements of 15.407(e). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 06/25/2013 Application Dated: 06/25/2013 |
| u-blox Malmo AB |
| Ostra Varvsgatan 4, 5tr |
| MALMO, SE-211 75 Sweden |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0941 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.055 |
| Power Output listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. Class II permissive change to the grant issued on 02/22/2013. This filing adds a portable exposure condition. Body-worn accessories are restricted to the integral belt clip tested for this filing. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: DTS 0.55 W/kg, NII 0.54 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 3J6zR7ZFn85QEIsm9Qj7/g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox Malmo AB Ostra Varvsgatan 4, 5tr MALMO, SE-211 75 Sweden |
Date of Grant: 06/25/2013 Application Dated: 06/25/2013 |
| Attention: Mats Andersson , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PVH0941 |
| Name of Grantee: | u-blox Malmo AB |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.055 |
| Power Output listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. Class II permissive change to the grant issued on 02/22/2013. This filing adds a portable exposure condition. Body-worn accessories are restricted to the integral belt clip tested for this filing. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: DTS 0.55 W/kg, NII 0.54 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |