1. FCC ID
  2. PWO
  3. PWO272770

FCC ID PWO272770

Tri-Band Signal Booster

by Wilson Electronics, LLC

Grantee Code: PWO   Product Code: 272770
Latest application date: 2012-09-20

FCC ID Device Details

FCC IDPWO272770
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePWO
Product Code272770
Applicant BusinessWilson Electronics, LLC 🇺🇸
Related Domains wilsonelectronics.com
Equipment ClassTri-Band Signal Booster

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824-849 MHzOriginal Equipment2012-09-20

Exhibits

DocumentTypeAvailableFile
User's ManaualUsers Manual2012-09-20PDF 1.1 MB
Internal PhotosInternal Photos2012-09-20PDF 977.7 KB
External PhotosExternal Photos2012-09-20PDF 410.7 KB
Label and Location PhotoID Label/Location Info2012-09-20PDF 92.7 KB
Final Amplification Stage Voltage and CurrentOperational Description2012-09-20PDF 44.4 KB
Test Setup PhotosTest Setup Photos2012-09-20PDF 365 KB
FCC Level Booster Test ReportTest Report2012-09-20PDF 944.1 KB
FCC Agent Authorization LetterCover Letter(s)2012-09-20PDF 344.3 KB
FCC Confidentiality LetterCover Letter(s)2012-09-20PDF 98.6 KB
FCC MPE ExposureRF Exposure Info2012-09-20PDF 117.8 KB
Tuning and AdjustmentParts List/Tune Up Info2012-09-20PDF 100.8 KB

Application Information

Application IDO+5BmnGiHzYzcPObnEHHVQ==
Final Action Date2012-09-20
Application PurposeOriginal Equipment
Applicant FRN0017528332
Model272770
Frequency Range824-849 MHz
Equipment ClassAMP - Amplifier
Device DescriptionTri-Band Signal Booster
Responsible PartyErin C. Elder, IP and Certification Engineer, eelder@wilsonelectronics.com , 435-673-5021
TCB Emailkarens@compliancetesting.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. The antenna installation and operating configurations of this signal booster, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical exclusion requirements of §2.1091. The antenna(s) used with this signal booster must be installed to provide a separation distance of at least 20 cm for an inside antenna, and 104 cm for a fixed outside antenna from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Antenna gain, less cable loss, must not exceed 10.1 dBi for an inside antenna and -0.46 dBi for fixed outside antenna. Users and installers must be provided with antenna installation instructions and operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
O+5BmnGiHzYzcPObnEHHVQ==2012-09-20Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824-849 MHz2.32AmpG7W22H
824-849 MHz2.32AmpGXW22H
869-894 MHz0.24AmpF9W22H
869-894 MHz0.24AmpG7D22H
869-894 MHz0.24AmpG7W22H
869-894 MHz0.24AmpGXW22H
1710-1755 MHz1.11AmpG7D27
1710-1755 MHz1.11AmpF9W27
1850-1910 MHz1.13AmpF9W24E
1850-1910 MHz1.13AmpG7D24E
1850-1910 MHz1.13AmpG7W24E
1850-1910 MHz1.13AmpGXW24E
1930-1990 MHz0.12AmpF9W24E
1930-1990 MHz0.12AmpG7D24E
1930-1990 MHz0.12AmpG7W24E
1930-1990 MHz0.12AmpGXW24E
2110-2150 MHz0.13AmpF9W27
2110-2150 MHz0.13AmpG7D27

Grants

TCB Grant - Application O+5BmnGiHzYzcPObnEHHVQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Compliance Testing, LLC
1724 S. Nevada Way
Mesa, AZ 85204
 Date of Grant: 09/20/2012

Application Dated: 09/19/2012
Wilson Electronics, LLC
3301 E. Deseret Drive
St. George, UT 84790
 
Attention: Erin Elder , IP and Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PWO272770
Name of Grantee:  Wilson Electronics, LLC
Equipment Class: Amplifier
Notes: Tri-Band Signal Booster
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.0  -  849.0 2.32  Amp F9W
22H 824.0  -  849.0 2.32  Amp G7D
22H 824.0  -  849.0 2.32  Amp G7W
22H 824.0  -  849.0 2.32  Amp GXW
22H 869.0  -  894.0 0.24  Amp F9W
22H 869.0  -  894.0 0.24  Amp G7D
22H 869.0  -  894.0 0.24  Amp G7W
22H 869.0  -  894.0 0.24  Amp GXW
27 1710.0  -  1755.0 1.11  Amp F9W
27 1710.0  -  1755.0 1.11  Amp G7D
24E 1850.0  -  1910.0 1.13  Amp F9W
24E 1850.0  -  1910.0 1.13  Amp G7D
24E 1850.0  -  1910.0 1.13  Amp G7W
24E 1850.0  -  1910.0 1.13  Amp GXW
24E 1930.0  -  1990.0 0.12  Amp F9W
24E 1930.0  -  1990.0 0.12  Amp G7D
24E 1930.0  -  1990.0 0.12  Amp G7W
24E 1930.0  -  1990.0 0.12  Amp GXW
27 2110.0  -  2150.0 0.13  Amp F9W
27 2110.0  -  2150.0 0.13  Amp G7D

Power listed is conducted. The antenna installation and operating configurations of this signal booster, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical exclusion requirements of §2.1091. The antenna(s) used with this signal booster must be installed to provide a separation distance of at least 20 cm for an inside antenna, and 104 cm for a fixed outside antenna from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Antenna gain, less cable loss, must not exceed 10.1 dBi for an inside antenna and -0.46 dBi for fixed outside antenna. Users and installers must be provided with antenna installation instructions and operating conditions for satisfying RF exposure compliance.

EAS Grant - Application O+5BmnGiHzYzcPObnEHHVQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Wilson Electronics, LLC
3301 E. Deseret Drive
St. George, UT 84790
United States 		  Date of Grant: 09/20/2012

Application Dated: 09/19/2012
 
Attention: Erin Elder , IP and Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PWO272770
Name of Grantee:  Wilson Electronics, LLC
Equipment Class: Amplifier
Notes: Tri-Band Signal Booster
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.0  -  849.0 2.32  Amp F9W
22H 824.0  -  849.0 2.32  Amp G7D
22H 824.0  -  849.0 2.32  Amp G7W
22H 824.0  -  849.0 2.32  Amp GXW
22H 869.0  -  894.0 0.24  Amp F9W
22H 869.0  -  894.0 0.24  Amp G7D
22H 869.0  -  894.0 0.24  Amp G7W
22H 869.0  -  894.0 0.24  Amp GXW
27 1710.0  -  1755.0 1.11  Amp F9W
27 1710.0  -  1755.0 1.11  Amp G7D
24E 1850.0  -  1910.0 1.13  Amp F9W
24E 1850.0  -  1910.0 1.13  Amp G7D
24E 1850.0  -  1910.0 1.13  Amp G7W
24E 1850.0  -  1910.0 1.13  Amp GXW
24E 1930.0  -  1990.0 0.12  Amp F9W
24E 1930.0  -  1990.0 0.12  Amp G7D
24E 1930.0  -  1990.0 0.12  Amp G7W
24E 1930.0  -  1990.0 0.12  Amp GXW
27 2110.0  -  2150.0 0.13  Amp F9W
27 2110.0  -  2150.0 0.13  Amp G7D

Power listed is conducted. The antenna installation and operating configurations of this signal booster, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical exclusion requirements of §2.1091. The antenna(s) used with this signal booster must be installed to provide a separation distance of at least 20 cm for an inside antenna, and 104 cm for a fixed outside antenna from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Antenna gain, less cable loss, must not exceed 10.1 dBi for an inside antenna and -0.46 dBi for fixed outside antenna. Users and installers must be provided with antenna installation instructions and operating conditions for satisfying RF exposure compliance.



Mail To: