1. FCC ID
  2. PWO
  3. PWO273201

FCC ID PWO273201

WIRELESS DUAL-BAND BI-DIRECTIONAL AMPLIFIER

by Wilson Electronics, LLC

Grantee Code: PWO   Product Code: 273201
Latest application date: 2012-07-03

FCC ID Device Details

FCC IDPWO273201
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePWO
Product Code273201
Applicant BusinessWilson Electronics, LLC 🇺🇸
Related Domains wilsonelectronics.com
Equipment ClassWIRELESS DUAL-BAND BI-DIRECTIONAL AMPLIFIER
Test FirmTimco Engineering, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824-849 MHzOriginal Equipment2012-07-03

Exhibits

DocumentTypeAvailableFile
Users GuideUsers Manual2012-07-03PDF 712 KB
Internal PhotosInternal Photos2012-07-03PDF 1.1 MB
External PhotosExternal Photos2012-07-03PDF 609.3 KB
Label InfoID Label/Location Info2012-07-03PDF 207 KB
voltage and CurrentOperational Description2012-07-03PDF 50.1 KB
Test Setup Photos DownlinkTest Setup Photos2012-07-03PDF 454.8 KB
Test Setup Photos UplinkTest Setup Photos2012-07-03PDF 409.1 KB
Test ReportTest Report2012-07-03PDF 1.4 MB
Authorization LetterCover Letter(s)2012-07-03PDF 226.1 KB
Confidential LetterCover Letter(s)2012-07-03PDF 103 KB
RF ExposureRF Exposure Info2012-07-03PDF 127.1 KB
Tuneup ProcedureParts List/Tune Up Info2012-07-03PDF 48.5 KB

Application Information

Application IDCtvUlxZF2SEbJ2u8CBDUmQ==
Final Action Date2012-07-03
Application PurposeOriginal Equipment
Applicant FRN0017528332
Model273201
Frequency Range824-849 MHz
Equipment ClassAMP - Amplifier
Device DescriptionWIRELESS DUAL-BAND BI-DIRECTIONAL AMPLIFIER
Responsible PartyErin C. Elder, IP and Certification Engineer, eelder@wilsonelectronics.com , 435-673-5021
Test FirmSid Sanders, Timco Engineering, Inc., tei@timcoengr.com , 352-472-5500
TCB Emailtei@timcoengr.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. The antenna installation and operating configurations of this signal booster, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical exclusion requirements of §2.1091. The antenna(s) used with this signal booster must be installed to provide a separation distance of at least 20 cm for an inside antenna and mobile outside antenna, and 70 cm for a fixed outside antenna from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Antenna gain less cable loss must not exceed 15 dBi for an inside antenna and fixed outside antenna, or 2.3 dBi for a mobile outside antenna. Users and installers must be provided with antenna installation instructions and operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
CtvUlxZF2SEbJ2u8CBDUmQ==2012-07-03Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824-849 MHz0.6AmpGXW22H
824-849 MHz0.66AmpG7D22H
824-849 MHz1.05AmpF9W22H
869-894 MHz0.0071AmpG7W22H
869-894 MHz0.0091AmpGXW22H
869-894 MHz0.0069AmpG7D22H
869-894 MHz0.0085AmpF9W22H
1850-1910 MHz0.98AmpGXW24E
1850-1910 MHz0.71AmpG7D24E
1850-1910 MHz1.18AmpG9W24E
1850-1910 MHz0.96AmpG7W24E
1930-1990 MHz0.0042AmpG7W24E
1930-1990 MHz0.005AmpGXW24E
1930-1990 MHz0.007AmpG7D24E
1930-1990 MHz0.0054AmpF9W24E

Grants

TCB Grant - Application CtvUlxZF2SEbJ2u8CBDUmQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
 Date of Grant: 07/03/2012

Application Dated: 07/03/2012
Wilson Electronics, LLC
3301 E. Deseret Drive
St. George, UT 84790
 
Attention: Erin Elder , IP and Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PWO273201
Name of Grantee:  Wilson Electronics, LLC
Equipment Class: Amplifier
Notes: WIRELESS DUAL-BAND BI-DIRECTIONAL AMPLIFIER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.0  -  849.0 0.59  Amp G7W
22H 824.0  -  849.0 0.6  Amp GXW
22H 824.0  -  849.0 0.66  Amp G7D
22H 824.0  -  849.0 1.05  Amp F9W
22H 869.0  -  894.0 0.0071  Amp G7W
22H 869.0  -  894.0 0.0091  Amp GXW
22H 869.0  -  894.0 0.0069  Amp G7D
22H 869.0  -  894.0 0.0085  Amp F9W
24E 1850.0  -  1910.0 0.96  Amp G7W
24E 1850.0  -  1910.0 0.98  Amp GXW
24E 1850.0  -  1910.0 0.71  Amp G7D
24E 1850.0  -  1910.0 1.18  Amp G9W
24E 1930.0  -  1990.0 0.0042  Amp G7W
24E 1930.0  -  1990.0 0.005  Amp GXW
24E 1930.0  -  1990.0 0.007  Amp G7D
24E 1930.0  -  1990.0 0.0054  Amp F9W

Power listed is conducted. The antenna installation and operating configurations of this signal booster, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical exclusion requirements of §2.1091. The antenna(s) used with this signal booster must be installed to provide a separation distance of at least 20 cm for an inside antenna and mobile outside antenna, and 70 cm for a fixed outside antenna from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Antenna gain less cable loss must not exceed 15 dBi for an inside antenna and fixed outside antenna, or 2.3 dBi for a mobile outside antenna. Users and installers must be provided with antenna installation instructions and operating conditions for satisfying RF exposure compliance.

EAS Grant - Application CtvUlxZF2SEbJ2u8CBDUmQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Wilson Electronics, LLC
3301 E. Deseret Drive
St. George, UT 84790
United States 		  Date of Grant: 07/03/2012

Application Dated: 07/03/2012
 
Attention: Erin Elder , IP and Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PWO273201
Name of Grantee:  Wilson Electronics, LLC
Equipment Class: Amplifier
Notes: WIRELESS DUAL-BAND BI-DIRECTIONAL AMPLIFIER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.0  -  849.0 0.59  Amp G7W
22H 824.0  -  849.0 0.6  Amp GXW
22H 824.0  -  849.0 0.66  Amp G7D
22H 824.0  -  849.0 1.05  Amp F9W
22H 869.0  -  894.0 0.0071  Amp G7W
22H 869.0  -  894.0 0.0091  Amp GXW
22H 869.0  -  894.0 0.0069  Amp G7D
22H 869.0  -  894.0 0.0085  Amp F9W
24E 1850.0  -  1910.0 0.96  Amp G7W
24E 1850.0  -  1910.0 0.98  Amp GXW
24E 1850.0  -  1910.0 0.71  Amp G7D
24E 1850.0  -  1910.0 1.18  Amp G9W
24E 1930.0  -  1990.0 0.0042  Amp G7W
24E 1930.0  -  1990.0 0.005  Amp GXW
24E 1930.0  -  1990.0 0.007  Amp G7D
24E 1930.0  -  1990.0 0.0054  Amp F9W

Power listed is conducted. The antenna installation and operating configurations of this signal booster, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical exclusion requirements of §2.1091. The antenna(s) used with this signal booster must be installed to provide a separation distance of at least 20 cm for an inside antenna and mobile outside antenna, and 70 cm for a fixed outside antenna from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Antenna gain less cable loss must not exceed 15 dBi for an inside antenna and fixed outside antenna, or 2.3 dBi for a mobile outside antenna. Users and installers must be provided with antenna installation instructions and operating conditions for satisfying RF exposure compliance.



Mail To: