1. FCC ID
  2. PWO
  3. PWO276215

FCC ID PWO276215

DUAL-BAND CHANNELIZED SIGNAL BOOSTER

by Wilson Electronics, LLC

Grantee Code: PWO   Product Code: 276215
Latest application date: 2012-04-04

FCC ID Device Details

FCC IDPWO276215
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePWO
Product Code276215
Applicant BusinessWilson Electronics, LLC 🇺🇸
Related Domains wilsonelectronics.com
Equipment ClassDUAL-BAND CHANNELIZED SIGNAL BOOSTER
Test FirmTimco Engineering, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824-849 MHzOriginal Equipment2012-04-04

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2012-04-04PDF 784 KB
Internal PhotosInternal Photos2012-04-04PDF 1 MB
External PhotosExternal Photos2012-04-04PDF 707.3 KB
Label InfoID Label/Location Info2012-04-04PDF 193.9 KB
Test Setup Photos Down LinkTest Setup Photos2012-04-04PDF 489.1 KB
Test Setup Photos Up LinkTest Setup Photos2012-04-04PDF 501.7 KB
Test ReportTest Report2012-04-04PDF 1.9 MB
Authorization LetterCover Letter(s)2012-04-04PDF 225.8 KB
Confidential LetterCover Letter(s)2012-04-04PDF 105.7 KB
RF ExposureRF Exposure Info2012-04-04PDF 472.1 KB
Tune up ProcedureParts List/Tune Up Info2012-04-04PDF 106.5 KB

Application Information

Application ID9CHU1Td/AFL1Krz25BSs0A==
Final Action Date2012-04-04
Application PurposeOriginal Equipment
Applicant FRN0017528332
Model276215
Frequency Range824-849 MHz
Equipment ClassAMP - Amplifier
Device DescriptionDUAL-BAND CHANNELIZED SIGNAL BOOSTER
Responsible PartyErin C. Elder, IP and Certification Engineer, eelder@wilsonelectronics.com , 435-673-5021
Test FirmSid Sanders, Timco Engineering, Inc., tei@timcoengr.com , 352-472-5500
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
9CHU1Td/AFL1Krz25BSs0A==2012-04-04Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824-849 MHz0.0002AmpG7W22H
824-849 MHz0.0004AmpGXW22H
824-849 MHz0.0004AmpG7D22H
869-894 MHz1.05AmpF9W22H
869-894 MHz0.3AmpG7W22H
869-894 MHz0.3AmpGXW22H
869-894 MHz0.89AmpG7D22H
1850-1910 MHz0.0003AmpG7W24E
1850-1910 MHz0.0003AmpGXW24E
1850-1910 MHz0.0005AmpG7D24E
1850-1910 MHz0.0006AmpF9W24E
1930-1990 MHz1.12AmpF9W24E
1930-1990 MHz0.38AmpG7W24E
1930-1990 MHz0.36AmpGXW24E
1930-1990 MHz0.85AmpG7D24E

Grants

TCB Grant - Application 9CHU1Td/AFL1Krz25BSs0A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
 Date of Grant: 04/04/2012

Application Dated: 04/04/2012
Wilson Electronics, LLC
3301 E. Deseret Drive
St. George, UT 84790
 
Attention: Erin Elder , IP and Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PWO276215
Name of Grantee:  Wilson Electronics, LLC
Equipment Class: Amplifier
Notes: DUAL-BAND CHANNELIZED SIGNAL BOOSTER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.0  -  849.0 0.0004  Amp F9W
22H 824.0  -  849.0 0.0002  Amp G7W
22H 824.0  -  849.0 0.0004  Amp GXW
22H 824.0  -  849.0 0.0004  Amp G7D
22H 869.0  -  894.0 1.05  Amp F9W
22H 869.0  -  894.0 0.3  Amp G7W
22H 869.0  -  894.0 0.3  Amp GXW
22H 869.0  -  894.0 0.89  Amp G7D
24E 1850.0  -  1910.0 0.0006  Amp F9W
24E 1850.0  -  1910.0 0.0003  Amp G7W
24E 1850.0  -  1910.0 0.0003  Amp GXW
24E 1850.0  -  1910.0 0.0005  Amp G7D
24E 1930.0  -  1990.0 1.12  Amp F9W
24E 1930.0  -  1990.0 0.38  Amp G7W
24E 1930.0  -  1990.0 0.36  Amp GXW
24E 1930.0  -  1990.0 0.85  Amp G7D

Power listed is conducted. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application 9CHU1Td/AFL1Krz25BSs0A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Wilson Electronics, LLC
3301 E. Deseret Drive
St. George, UT 84790
United States 		  Date of Grant: 04/04/2012

Application Dated: 04/04/2012
 
Attention: Erin Elder , IP and Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PWO276215
Name of Grantee:  Wilson Electronics, LLC
Equipment Class: Amplifier
Notes: DUAL-BAND CHANNELIZED SIGNAL BOOSTER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.0  -  849.0 0.0004  Amp F9W
22H 824.0  -  849.0 0.0002  Amp G7W
22H 824.0  -  849.0 0.0004  Amp GXW
22H 824.0  -  849.0 0.0004  Amp G7D
22H 869.0  -  894.0 1.05  Amp F9W
22H 869.0  -  894.0 0.3  Amp G7W
22H 869.0  -  894.0 0.3  Amp GXW
22H 869.0  -  894.0 0.89  Amp G7D
24E 1850.0  -  1910.0 0.0006  Amp F9W
24E 1850.0  -  1910.0 0.0003  Amp G7W
24E 1850.0  -  1910.0 0.0003  Amp GXW
24E 1850.0  -  1910.0 0.0005  Amp G7D
24E 1930.0  -  1990.0 1.12  Amp F9W
24E 1930.0  -  1990.0 0.38  Amp G7W
24E 1930.0  -  1990.0 0.36  Amp GXW
24E 1930.0  -  1990.0 0.85  Amp G7D

Power listed is conducted. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: