1. FCC ID
  2. PWO
  3. PWO2B1216

FCC ID PWO2B1216

Dual Band High Power Direct Connect Signal Booster

by Wilson Electronics, LLC

Grantee Code: PWO   Product Code: 2B1216
Latest application date: 2012-07-04

FCC ID Device Details

FCC IDPWO2B1216
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePWO
Product Code2B1216
Applicant BusinessWilson Electronics, LLC 🇺🇸
Related Domains wilsonelectronics.com
Equipment ClassDual Band High Power Direct Connect Signal Booster
Test FirmBay Area Compliance Laboratory

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824-849 MHzOriginal Equipment2012-07-04

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2012-07-04PDF 2 MB
Internal PhotosInternal Photos2012-07-04PDF 268.4 KB
External PhotosExternal Photos2012-07-04PDF 307.2 KB
FCC ID LabelID Label/Location Info2012-07-04PDF 82.2 KB
Test Setup PhotosTest Setup Photos2012-07-04PDF 203.4 KB
Test ReportTest Report2012-07-04PDF 1.2 MB
Confidential Request LetterCover Letter(s)2012-07-04PDF 101.6 KB

Application Information

Application ID7E0dG+N/V6CBE4xgMqfVVw==
Final Action Date2012-07-04
Application PurposeOriginal Equipment
Applicant FRN0017528332
Model2B1216
Frequency Range824-849 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionDual Band High Power Direct Connect Signal Booster
Responsible PartyErin C. Elder, IP and Certification Engineer, eelder@wilsonelectronics.com , 435-673-5021
Test FirmJohn Chan, Bay Area Compliance Laboratory, bacl.regulatory@baclcorp.com , 408-732-9162
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. The antenna installation and operating configurations of this signal booster, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical exclusion requirements of §2.1091. The antenna(s) used for this signal booster must be installed to provide a separation distance of at least 140 cm for the outside antenna from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Antenna gain less cable loss must not exceed 15 dBi for the outside antenna. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
7E0dG+N/V6CBE4xgMqfVVw==2012-07-04Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824-849 MHz3.199AmpF9W22H
824-849 MHz4.169AmpG7W22H
824-849 MHz2.938AmpF9W22H
869-894 MHz0.014AmpF9W22H
869-894 MHz0.013AmpF9W22H
869-894 MHz0.012AmpGXW22H
869-894 MHz0.014AmpG7W22H
1850-1910 MHz2.41AmpF9W24E
1850-1910 MHz2.344AmpF9W24E
1850-1910 MHz2.723AmpGXW24E
1850-1910 MHz3.17AmpG7W24E
1930-1990 MHz0.017AmpF9W24E
1930-1990 MHz0.017AmpGXW24E
1930-1990 MHz0.017AmpG7W24E

Grants

TCB Grant - Application 7E0dG+N/V6CBE4xgMqfVVw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 07/04/2012

Application Dated: 07/04/2012
Wilson Electronics, LLC
3301 E. Deseret Drive
St. George, UT 84790
 
Attention: Erin Elder , IP and Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PWO2B1216
Name of Grantee:  Wilson Electronics, LLC
Equipment Class: PCS Licensed Transmitter
Notes: Dual Band High Power Direct Connect Signal Booster
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.0  -  849.0 3.802  Amp GXW
22H 869.0  -  894.0 0.012  Amp GXW
24E 1850.0  -  1910.0 2.723  Amp GXW
24E 1930.0  -  1990.0 0.017  Amp GXW
22H 824.0  -  849.0 4.169  Amp G7W
22H 869.0  -  894.0 0.014  Amp G7W
24E 1850.0  -  1910.0 3.17  Amp G7W
24E 1930.0  -  1990.0 0.017  Amp G7W
22H 824.0  -  849.0 2.938  Amp F9W
22H 869.0  -  894.0 0.014  Amp F9W
24E 1850.0  -  1910.0 2.41  Amp F9W
24E 1930.0  -  1990.0 0.017  Amp F9W
22H 824.0  -  849.0 3.199  Amp F9W
22H 869.0  -  894.0 0.013  Amp F9W
24E 1850.0  -  1910.0 2.344  Amp F9W

Power listed is conducted. The antenna installation and operating configurations of this signal booster, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical exclusion requirements of §2.1091. The antenna(s) used for this signal booster must be installed to provide a separation distance of at least 140 cm for the outside antenna from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Antenna gain less cable loss must not exceed 15 dBi for the outside antenna. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application 7E0dG+N/V6CBE4xgMqfVVw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Wilson Electronics, LLC
3301 E. Deseret Drive
St. George, UT 84790
United States 		  Date of Grant: 07/04/2012

Application Dated: 07/04/2012
 
Attention: Erin Elder , IP and Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PWO2B1216
Name of Grantee:  Wilson Electronics, LLC
Equipment Class: PCS Licensed Transmitter
Notes: Dual Band High Power Direct Connect Signal Booster
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.0  -  849.0 3.802  Amp GXW
22H 869.0  -  894.0 0.012  Amp GXW
24E 1850.0  -  1910.0 2.723  Amp GXW
24E 1930.0  -  1990.0 0.017  Amp GXW
22H 824.0  -  849.0 4.169  Amp G7W
22H 869.0  -  894.0 0.014  Amp G7W
24E 1850.0  -  1910.0 3.17  Amp G7W
24E 1930.0  -  1990.0 0.017  Amp G7W
22H 824.0  -  849.0 2.938  Amp F9W
22H 869.0  -  894.0 0.014  Amp F9W
24E 1850.0  -  1910.0 2.41  Amp F9W
24E 1930.0  -  1990.0 0.017  Amp F9W
22H 824.0  -  849.0 3.199  Amp F9W
22H 869.0  -  894.0 0.013  Amp F9W
24E 1850.0  -  1910.0 2.344  Amp F9W

Power listed is conducted. The antenna installation and operating configurations of this signal booster, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical exclusion requirements of §2.1091. The antenna(s) used for this signal booster must be installed to provide a separation distance of at least 140 cm for the outside antenna from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Antenna gain less cable loss must not exceed 15 dBi for the outside antenna. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: