FCC ID PWO2B2725
TRI-BAND SIGNAL BOOSTER
by Wilson Electronics, LLC
Grantee Code: PWO Product Code: 2B2725
Latest application date: 2012-10-04
FCC ID Device Details
| FCC ID | PWO2B2725 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | PWO |
| Product Code | 2B2725 |
| Applicant Business | Wilson Electronics, LLC 🇺🇸 |
| Related Domains |  weboost.com |
| Equipment Class | TRI-BAND SIGNAL BOOSTER |
| Test Firm | Timco Engineering, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 824-849 MHz | Original Equipment | 2012-10-04 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| USERS MANUAL | Users Manual | 2012-10-04 | PDF 1.8 MB |
| INTERNAL PHOTOS | Internal Photos | 2012-10-04 | PDF 695.1 KB |
| EXTERNAL PHOTOS | External Photos | 2012-10-04 | PDF 1.7 MB |
| LABEL SAMPLE AND LOCATION | ID Label/Location Info | 2012-10-04 | PDF 224 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2012-10-04 | PDF 986.7 KB |
| TEST REPORT | Test Report | 2012-10-04 | PDF 2.4 MB |
| FINAL AMPLIFICATION STAGE VOLTAGE AND CURRENT ATTESTATION | Cover Letter(s) | 2012-10-04 | PDF 49.2 KB |
| AUTHORIZATION LETTER | Cover Letter(s) | 2012-10-04 | PDF 346.2 KB |
| CONFIDENTIAL REQUEST LETTER | Cover Letter(s) | 2012-10-04 | PDF 102.6 KB |
| MPE EXPOSURE | RF Exposure Info | 2012-10-04 | PDF 139.7 KB |
| TUNING AND ADJUSTMENT | Parts List/Tune Up Info | 2012-10-04 | PDF 47.7 KB |
Application Information
| Application ID | ZO/gKxQqjy396rsarPwxjg== |
|---|---|
| Final Action Date | 2012-10-04 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0017528332 |
| Model | 2B2725 |
| Frequency Range | 824-849 MHz |
| Equipment Class | AMP - Amplifier |
| Device Description | TRI-BAND SIGNAL BOOSTER |
| Responsible Party | Erin C. Elder, IP and Compliance Engineer, eelder@weboost.com , 435-673-5021 |
| Test Firm | Sid Sanders, Timco Engineering, Inc., tei@timcoengr.com  , 352-472-5500 |
| TCB Email | TEI@TIMCOENGR.COM |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. The antenna installation and operating configurations of this signal booster, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical exclusion requirements of §2.1091. The antenna(s) used with this signal booster must be installed to provide a separation distance of at least 20 cm for an inside antenna and 20 cm for a fixed outside antenna from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Antenna gain less cable loss must not exceed 15 dBi for an inside antenna and 3.4 dBi for a fixed outside antenna. Users and installers must be provided with antenna installation instructions and operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ZO/gKxQqjy396rsarPwxjg== | 2012-10-04 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules |
|---|---|---|---|---|
| 824-849 MHz | 0.813 | Amp | GXW | 22H |
| 824-849 MHz | 0.759 | Amp | G7W | 22H |
| 869-894 MHz | 0.00011 | Amp | F9W | 22H |
| 869-894 MHz | 0.0001 | Amp | G7D | 22H |
| 869-894 MHz | 0.00012 | Amp | GXW | 22H |
| 869-894 MHz | 0.00012 | Amp | G7W | 22H |
| 1710-1755 MHz | 0.229 | Amp | G7D | 27 |
| 1710-1755 MHz | 0.427 | Amp | GXW | 27 |
| 1710-1755 MHz | 0.407 | Amp | G7W | 27 |
| 1710-1755 MHz | 0.447 | Amp | F9W | 27 |
| 1850-1910 MHz | 0.661 | Amp | F9W | 24E |
| 1850-1910 MHz | 0.472 | Amp | G7D | 24E |
| 1850-1910 MHz | 0.724 | Amp | GXW | 24E |
| 1850-1910 MHz | 0.646 | Amp | G7W | 24E |
| 1930-1990 MHz | 0.0002 | Amp | F9W | 24E |
| 1930-1990 MHz | 0.00013 | Amp | G7D | 24E |
| 1930-1990 MHz | 0.00012 | Amp | GXW | 24E |
| 1930-1990 MHz | 0.00011 | Amp | G7W | 24E |
| 2110-2155 MHz | 0.00023 | Amp | F9W | 27 |
| 2110-2155 MHz | 0.00018 | Amp | G7D | 27 |
| 2110-2155 MHz | 0.00012 | Amp | GXW | 27 |
| 2110-2155 MHz | 0.0013 | Amp | G7D | 27 |
Grants
TCB Grant - Application ZO/gKxQqjy396rsarPwxjg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 10/04/2012 Application Dated: 10/04/2012 |
| Wilson Electronics, LLC |
| 3301 E. Deseret Drive |
| St. George, UT 84790 |
| Attention: Erin Elder , IP and Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PWO2B2725 |
| Name of Grantee: | Wilson Electronics, LLC |
| Equipment Class: | Amplifier |
| Notes: | TRI-BAND SIGNAL BOOSTER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.0 - 849.0 | 0.692 | Amp | F9W | |
| 22H | 824.0 - 849.0 | 0.589 | Amp | G7D | |
| 22H | 824.0 - 849.0 | 0.813 | Amp | GXW | |
| 22H | 824.0 - 849.0 | 0.759 | Amp | G7W | |
| 22H | 869.0 - 894.0 | 0.00011 | Amp | F9W | |
| 22H | 869.0 - 894.0 | 0.0001 | Amp | G7D | |
| 22H | 869.0 - 894.0 | 0.00012 | Amp | GXW | |
| 22H | 869.0 - 894.0 | 0.00012 | Amp | G7W | |
| 27 | 1710.0 - 1755.0 | 0.447 | Amp | F9W | |
| 27 | 1710.0 - 1755.0 | 0.229 | Amp | G7D | |
| 27 | 1710.0 - 1755.0 | 0.427 | Amp | GXW | |
| 27 | 1710.0 - 1755.0 | 0.407 | Amp | G7W | |
| 27 | 2110.0 - 2155.0 | 0.00023 | Amp | F9W | |
| 27 | 2110.0 - 2155.0 | 0.00018 | Amp | G7D | |
| 27 | 2110.0 - 2155.0 | 0.00012 | Amp | GXW | |
| 27 | 2110.0 - 2155.0 | 0.0013 | Amp | G7D | |
| 24E | 1850.0 - 1910.0 | 0.661 | Amp | F9W | |
| 24E | 1850.0 - 1910.0 | 0.472 | Amp | G7D | |
| 24E | 1850.0 - 1910.0 | 0.724 | Amp | GXW | |
| 24E | 1850.0 - 1910.0 | 0.646 | Amp | G7W | |
| 24E | 1930.0 - 1990.0 | 0.0002 | Amp | F9W | |
| 24E | 1930.0 - 1990.0 | 0.00013 | Amp | G7D | |
| 24E | 1930.0 - 1990.0 | 0.00012 | Amp | GXW | |
| 24E | 1930.0 - 1990.0 | 0.00011 | Amp | G7W |
| Power listed is conducted. The antenna installation and operating configurations of this signal booster, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical exclusion requirements of §2.1091. The antenna(s) used with this signal booster must be installed to provide a separation distance of at least 20 cm for an inside antenna and 20 cm for a fixed outside antenna from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Antenna gain less cable loss must not exceed 15 dBi for an inside antenna and 3.4 dBi for a fixed outside antenna. Users and installers must be provided with antenna installation instructions and operating conditions for satisfying RF exposure compliance.
|
EAS Grant - Application ZO/gKxQqjy396rsarPwxjg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Wilson Electronics, LLC 3301 E. Deseret Drive St. George, UT 84790 United States |
Date of Grant: 10/04/2012 Application Dated: 10/04/2012 |
| Attention: Erin Elder , IP and Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PWO2B2725 |
| Name of Grantee: | Wilson Electronics, LLC |
| Equipment Class: | Amplifier |
| Notes: | TRI-BAND SIGNAL BOOSTER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.0 - 849.0 | 0.692 | Amp | F9W | |
| 22H | 824.0 - 849.0 | 0.589 | Amp | G7D | |
| 22H | 824.0 - 849.0 | 0.813 | Amp | GXW | |
| 22H | 824.0 - 849.0 | 0.759 | Amp | G7W | |
| 22H | 869.0 - 894.0 | 0.00011 | Amp | F9W | |
| 22H | 869.0 - 894.0 | 0.0001 | Amp | G7D | |
| 22H | 869.0 - 894.0 | 0.00012 | Amp | GXW | |
| 22H | 869.0 - 894.0 | 0.00012 | Amp | G7W | |
| 27 | 1710.0 - 1755.0 | 0.447 | Amp | F9W | |
| 27 | 1710.0 - 1755.0 | 0.229 | Amp | G7D | |
| 27 | 1710.0 - 1755.0 | 0.427 | Amp | GXW | |
| 27 | 1710.0 - 1755.0 | 0.407 | Amp | G7W | |
| 27 | 2110.0 - 2155.0 | 0.00023 | Amp | F9W | |
| 27 | 2110.0 - 2155.0 | 0.00018 | Amp | G7D | |
| 27 | 2110.0 - 2155.0 | 0.00012 | Amp | GXW | |
| 27 | 2110.0 - 2155.0 | 0.0013 | Amp | G7D | |
| 24E | 1850.0 - 1910.0 | 0.661 | Amp | F9W | |
| 24E | 1850.0 - 1910.0 | 0.472 | Amp | G7D | |
| 24E | 1850.0 - 1910.0 | 0.724 | Amp | GXW | |
| 24E | 1850.0 - 1910.0 | 0.646 | Amp | G7W | |
| 24E | 1930.0 - 1990.0 | 0.0002 | Amp | F9W | |
| 24E | 1930.0 - 1990.0 | 0.00013 | Amp | G7D | |
| 24E | 1930.0 - 1990.0 | 0.00012 | Amp | GXW | |
| 24E | 1930.0 - 1990.0 | 0.00011 | Amp | G7W |
| Power listed is conducted. The antenna installation and operating configurations of this signal booster, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical exclusion requirements of §2.1091. The antenna(s) used with this signal booster must be installed to provide a separation distance of at least 20 cm for an inside antenna and 20 cm for a fixed outside antenna from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Antenna gain less cable loss must not exceed 15 dBi for an inside antenna and 3.4 dBi for a fixed outside antenna. Users and installers must be provided with antenna installation instructions and operating conditions for satisfying RF exposure compliance.
|
| Mail To: |