1. FCC ID
  2. PWO
  3. PWO2B5125

FCC ID PWO2B5125

TRI-BAND SIGNAL BOOSTER

by Wilson Electronics, LLC

Grantee Code: PWO   Product Code: 2B5125
Latest application date: 2012-06-25

FCC ID Device Details

FCC IDPWO2B5125
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePWO
Product Code2B5125
Applicant BusinessWilson Electronics, LLC 🇺🇸
Related Domains wilsonelectronics.com
Equipment ClassTRI-BAND SIGNAL BOOSTER
Test FirmTimco Engineering, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
746-757 MHzOriginal Equipment2012-06-25

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2012-06-25PDF 1.8 MB
Internal PhotosInternal Photos2012-06-25PDF 1.1 MB
External PhotosExternal Photos2012-06-25PDF 964.1 KB
LabelID Label/Location Info2012-06-25PDF 271.5 KB
Label LocationID Label/Location Info2012-06-25PDF 1.5 MB
Voltage and CurrentOperational Description2012-06-25PDF 50.2 KB
Test Setup PhotosTest Setup Photos2012-06-25PDF 382.7 KB
Test ReportTest Report2012-06-25PDF 2.2 MB
Authorization LetterCover Letter(s)2012-06-25PDF 222.6 KB
Confidential LetterCover Letter(s)2012-06-25PDF 105.6 KB
RF ExposureRF Exposure Info2012-06-25PDF 323.8 KB
Tuneup ProcedureParts List/Tune Up Info2012-06-25PDF 48.6 KB

Application Information

Application IDlJuM9FBfcmSqDkgnU++80g==
Final Action Date2012-06-25
Application PurposeOriginal Equipment
Applicant FRN0017528332
Model2B5125
Frequency Range746-757 MHz
Equipment ClassAMP - Amplifier
Device DescriptionTRI-BAND SIGNAL BOOSTER
Responsible PartyErin C. Elder, IP and Certification Engineer, eelder@wilsonelectronics.com , 435-673-5021
Test FirmSid Sanders, Timco Engineering, Inc., tei@timcoengr.com , 352-472-5500
TCB Emailtei@timcoengr.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. The antenna installation and operating configurations of this signal booster, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical exclusion requirements of §2.1091. The antenna(s) used with this signal booster must be installed to provide a separation distance of at least 20 cm for an inside antenna and mobile outside antenna, and 63 cm for a fixed outside antenna from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Antenna gain less cable loss must not exceed 15 dBi for an inside antenna and fixed outside antenna, or 4.6 dBi for a mobile outside antenna. Users and installers must be provided with antenna installation instructions and operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
lJuM9FBfcmSqDkgnU++80g==2012-06-25Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
776-787 MHz0.45AmpG7D27
824-849 MHz0.65AmpGXW22H
824-849 MHz0.56AmpG7W22H
824-849 MHz0.7AmpG7D22H
824-849 MHz0.85AmpF9W22H
869-894 MHz0.00063AmpG7W22H
869-894 MHz0.00098AmpF9W22H
869-894 MHz0.00059AmpG7D22H
869-894 MHz0.00089AmpGXW22H
1850-1910 MHz0.603AmpF9W24E
1850-1910 MHz0.562AmpG7D24E
1850-1910 MHz0.501AmpG7W24E
1850-1910 MHz0.676AmpGXW24E
1930-1990 MHz0.00074AmpF9W24E
1930-1990 MHz0.00039AmpG7D24E
1930-1990 MHz0.00074AmpGXW24E
1930-1990 MHz0.00069AmpG7W24E

Grants

TCB Grant - Application lJuM9FBfcmSqDkgnU++80g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
 Date of Grant: 06/25/2012

Application Dated: 06/25/2012
Wilson Electronics, LLC
3301 E. Deseret Drive
St. George, UT 84790
 
Attention: Erin Elder , IP and Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PWO2B5125
Name of Grantee:  Wilson Electronics, LLC
Equipment Class: Amplifier
Notes: TRI-BAND SIGNAL BOOSTER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
27 746.0  -  757.0 0.00063  Amp G7D
27 776.0  -  787.0 0.45  Amp G7D
22H 824.0  -  849.0 0.65  Amp GXW
22H 824.0  -  849.0 0.56  Amp G7W
22H 824.0  -  849.0 0.7  Amp G7D
22H 824.0  -  849.0 0.85  Amp F9W
22H 869.0  -  894.0 0.00098  Amp F9W
22H 869.0  -  894.0 0.00059  Amp G7D
22H 869.0  -  894.0 0.00089  Amp GXW
22H 869.0  -  894.0 0.00063  Amp G7W
24E 1850.0  -  1910.0 0.603  Amp F9W
24E 1850.0  -  1910.0 0.562  Amp G7D
24E 1850.0  -  1910.0 0.501  Amp G7W
24E 1850.0  -  1910.0 0.676  Amp GXW
24E 1930.0  -  1990.0 0.00074  Amp F9W
24E 1930.0  -  1990.0 0.00039  Amp G7D
24E 1930.0  -  1990.0 0.00074  Amp GXW
24E 1930.0  -  1990.0 0.00069  Amp G7W

Power listed is conducted. The antenna installation and operating configurations of this signal booster, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical exclusion requirements of §2.1091. The antenna(s) used with this signal booster must be installed to provide a separation distance of at least 20 cm for an inside antenna and mobile outside antenna, and 63 cm for a fixed outside antenna from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Antenna gain less cable loss must not exceed 15 dBi for an inside antenna and fixed outside antenna, or 4.6 dBi for a mobile outside antenna. Users and installers must be provided with antenna installation instructions and operating conditions for satisfying RF exposure compliance.

EAS Grant - Application lJuM9FBfcmSqDkgnU++80g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Wilson Electronics, LLC
3301 E. Deseret Drive
St. George, UT 84790
United States 		  Date of Grant: 06/25/2012

Application Dated: 06/25/2012
 
Attention: Erin Elder , IP and Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PWO2B5125
Name of Grantee:  Wilson Electronics, LLC
Equipment Class: Amplifier
Notes: TRI-BAND SIGNAL BOOSTER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
27 746.0  -  757.0 0.00063  Amp G7D
27 776.0  -  787.0 0.45  Amp G7D
22H 824.0  -  849.0 0.65  Amp GXW
22H 824.0  -  849.0 0.56  Amp G7W
22H 824.0  -  849.0 0.7  Amp G7D
22H 824.0  -  849.0 0.85  Amp F9W
22H 869.0  -  894.0 0.00098  Amp F9W
22H 869.0  -  894.0 0.00059  Amp G7D
22H 869.0  -  894.0 0.00089  Amp GXW
22H 869.0  -  894.0 0.00063  Amp G7W
24E 1850.0  -  1910.0 0.603  Amp F9W
24E 1850.0  -  1910.0 0.562  Amp G7D
24E 1850.0  -  1910.0 0.501  Amp G7W
24E 1850.0  -  1910.0 0.676  Amp GXW
24E 1930.0  -  1990.0 0.00074  Amp F9W
24E 1930.0  -  1990.0 0.00039  Amp G7D
24E 1930.0  -  1990.0 0.00074  Amp GXW
24E 1930.0  -  1990.0 0.00069  Amp G7W

Power listed is conducted. The antenna installation and operating configurations of this signal booster, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical exclusion requirements of §2.1091. The antenna(s) used with this signal booster must be installed to provide a separation distance of at least 20 cm for an inside antenna and mobile outside antenna, and 63 cm for a fixed outside antenna from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Antenna gain less cable loss must not exceed 15 dBi for an inside antenna and fixed outside antenna, or 4.6 dBi for a mobile outside antenna. Users and installers must be provided with antenna installation instructions and operating conditions for satisfying RF exposure compliance.



Mail To: