1. FCC ID
  2. PWO
  3. PWO8012SM

FCC ID PWO8012SM

WIRELESS CELL PHONE AMPLIFIER

by Wilson Electronics, LLC

Grantee Code: PWO   Product Code: 8012SM
Latest application date: 2007-01-24

FCC ID Device Details

FCC IDPWO8012SM
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePWO
Product Code8012SM
Applicant BusinessWilson Electronics, LLC 🇺🇸
Related Domains wilsonelectronics.com
Equipment ClassWIRELESS CELL PHONE AMPLIFIER
Test FirmTimco Engineering, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824-849 MHzClass II permissive change or modification of presently authorized equipment2007-01-24
824-849 MHzOriginal Equipment2005-05-09

Exhibits

DocumentTypeAvailableFile
INSTALLATION GUIDEUsers Manual2007-01-24PDF 619.3 KB
MOBILE INSTALLATION GUIDEUsers Manual2007-01-24PDF 1 MB
Users ManualUsers Manual2005-05-09PDF 568.9 KB
INTERNAL PHOTOSInternal Photos2007-01-24PDF 301 KB
Internal PhotosInternal Photos2005-05-09PDF 541.5 KB
EXTERNAL PHOTOSExternal Photos2007-01-24PDF 195.7 KB
External PhotosExternal Photos2005-05-09PDF 309 KB
LABEL SAMPLE AND LOCATIONID Label/Location Info2007-01-24PDF 64.2 KB
ID Label 1ID Label/Location Info2005-05-09PDF 51.1 KB
ID Label 2ID Label/Location Info2005-05-09PDF 66 KB
Operational DescriptionOperational Description2005-05-09PDF 82.6 KB
TEST SETUP PHOTOSTest Setup Photos2007-01-24PDF 65.3 KB
Test Setup Photos 1Test Setup Photos2005-05-09PDF 103.3 KB
Test Setup Photos 2Test Setup Photos2005-05-09PDF 102.8 KB
TEST REPORTTest Report2007-01-24PDF 404.4 KB
Test Report 1Test Report2005-05-09PDF 24.2 KB
Test Report 2Test Report2005-05-09PDF 2.1 MB
Test Report 3Test Report2005-05-09PDF 2.2 MB
Test Report 4Test Report2005-05-09PDF 2.1 MB
Test Report 5Test Report2005-05-09PDF 2.2 MB
Test Report 6Test Report2005-05-09PDF 2.9 MB
Test Report 7Test Report2005-05-09PDF 2.9 MB
CLASS II CHANGE LETTERCover Letter(s)2007-01-24PDF 312.4 KB
CONFIDENTIALITY LETTERCover Letter(s)2007-01-24PDF 346.5 KB
Confidentiality Letter 1Cover Letter(s)2005-05-09PDF 49.5 KB
Confidentiality Letter 2Cover Letter(s)2005-05-09PDF 112.2 KB
ResponseCover Letter(s)2005-05-09PDF 38 KB
RF Exposure InfoRF Exposure Info2005-05-09PDF 441 KB
Tune Up ProcedureParts List/Tune Up Info2005-05-09PDF 32.8 KB
Schematics 1 Metadata onlySchematicsPDF 288.6 KB
Schematics 2 Metadata onlySchematicsPDF 393 KB

Application Information

Application IDdqJ/YG84h09aS5NwScqMkg==
Final Action Date2007-01-24
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0017528332
Model8012SM
Frequency Range824-849 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionWIRELESS CELL PHONE AMPLIFIER
Responsible PartyErin C. Elder, IP and Certification Engineer, eelder@wilsonelectronics.com , 435-673-5021
Test FirmSid Sanders, Timco Engineering, Inc., info@timcoengr.com , 352-472-5500
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. When used in a fixed installation with a 13 dBi antenna, the uplink (exterior) antenna(s) used for this amplifier must be installed to provide a separation distance of at least 60 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. When used in a vehicle installation with a 5dBi or 6 dBi antenna, a separation distance of at least 20cm from all persons must be maintained. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antennas as listed in this filing. Equipment is an extender.

Applications

Application IDDatePurpose
dqJ/YG84h09aS5NwScqMkg==2007-01-24Class II permissive change or modification of presently authorized equipment
P9T8/zLxRJH1D8fslFOjSw==2005-05-09Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
824-849 MHz1.23AmpF9W22HBB
824-849 MHz1.23AmpF9W22H
824-849 MHz1AmpGXW22HBB
824-849 MHz1AmpGXW22H
824-849 MHz1.09AmpG7W22HBB
824-849 MHz1.09AmpG7W22H
824-849 MHz1.04AmpF1D22HBB
824-849 MHz1.04AmpF1D22H
869-894 MHz0.0107AmpF1D22HBB
869-894 MHz0.0107AmpF1D22H
869-894 MHz0.01AmpF9W22HBB
869-894 MHz0.01AmpF9W22H
869-894 MHz0.0125AmpGXW22HBB
869-894 MHz0.0125AmpGXW22H
869-894 MHz0.0123AmpG7W22HBB
869-894 MHz0.0123AmpG7W22H
1850-1910 MHz1.122AmpF9W24EBB
1850-1910 MHz1.122AmpF9W24E
1850-1910 MHz0.933AmpGXW24EBB
1850-1910 MHz0.933AmpGXW24E
1850-1910 MHz1.071AmpG7W24EBB
1850-1910 MHz1.071AmpG7W24E
1930-1990 MHz0.0097AmpGXW24EBB
1930-1990 MHz0.0097AmpGXW24E
1930-1990 MHz0.0091AmpG7W24EBB
1930-1990 MHz0.0091AmpG7W24E

Grants

TCB Grant - Application P9T8/zLxRJH1D8fslFOjSw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CKC Certification Services, LLC
5046 Sierra Pines
Mariposa, CA 95338
 Date of Grant: 05/09/2005

Application Dated: 05/09/2005
Wilson Electronics, LLC
3301 E. Deseret Drive
St. George, UT 84790
 
Attention: Mikel Parry , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PWO8012SM
Name of Grantee:  Wilson Electronics, LLC
Equipment Class: PCS Licensed Transmitter
Notes: Mobile Wireless Cellular/PCS SmartTech Amplifier
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BB 24E 1930.0  -  1990.0 0.0097  Amp F9W
BB 24E 1930.0  -  1990.0 0.0097  Amp GXW
BB 24E 1930.0  -  1990.0 0.0091  Amp G7W
BB 24E 1850.0  -  1910.0 1.122  Amp F9W
BB 24E 1850.0  -  1910.0 0.933  Amp GXW
BB 24E 1850.0  -  1910.0 1.071  Amp G7W
BB 22H 869.0  -  894.0 0.01  Amp F9W
BB 22H 869.0  -  894.0 0.0125  Amp GXW
BB 22H 869.0  -  894.0 0.0123  Amp G7W
BB 22H 869.0  -  894.0 0.0107  Amp F1D
BB 22H 824.0  -  849.0 1.23  Amp F9W
BB 22H 824.0  -  849.0 1.0  Amp GXW
BB 22H 824.0  -  849.0 1.09  Amp G7W
BB 22H 824.0  -  849.0 1.04  Amp F1D

Power listed is conducted. The uplink (exterior) antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antennas as listed in this filing. Equipment is an extender.


BB: Power output continuously variable from value listed to less than 0.5 watts.

EAS Grant - Application P9T8/zLxRJH1D8fslFOjSw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Wilson Electronics, LLC
3301 E. Deseret Drive
St. George, UT 84790
United States 		  Date of Grant: 05/09/2005

Application Dated: 05/09/2005
 
Attention: Mikel Parry , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PWO8012SM
Name of Grantee:  Wilson Electronics, LLC
Equipment Class: PCS Licensed Transmitter
Notes: Mobile Wireless Cellular/PCS SmartTech Amplifier
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BB 24E 1930.0  -  1990.0 0.0097  Amp F9W
BB 24E 1930.0  -  1990.0 0.0097  Amp GXW
BB 24E 1930.0  -  1990.0 0.0091  Amp G7W
BB 24E 1850.0  -  1910.0 1.122  Amp F9W
BB 24E 1850.0  -  1910.0 0.933  Amp GXW
BB 24E 1850.0  -  1910.0 1.071  Amp G7W
BB 22H 869.0  -  894.0 0.01  Amp F9W
BB 22H 869.0  -  894.0 0.0125  Amp GXW
BB 22H 869.0  -  894.0 0.0123  Amp G7W
BB 22H 869.0  -  894.0 0.0107  Amp F1D
BB 22H 824.0  -  849.0 1.23  Amp F9W
BB 22H 824.0  -  849.0 1.0  Amp GXW
BB 22H 824.0  -  849.0 1.09  Amp G7W
BB 22H 824.0  -  849.0 1.04  Amp F1D

Power listed is conducted. The uplink (exterior) antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antennas as listed in this filing. Equipment is an extender.


BB: Power output continuously variable from value listed to less than 0.5 watts.

TCB Grant - Application dqJ/YG84h09aS5NwScqMkg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION 		TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 01/24/2007

Application Dated: 01/24/2007
Wilson Electronics, LLC
3301 E. Deseret Drive
St. George, UT 84790
 
Attention: Erin Elder , IP and Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PWO8012SM
Name of Grantee:  Wilson Electronics, LLC
Equipment Class: PCS Licensed Transmitter
Notes: WIRELESS CELL PHONE AMPLIFIER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24E 1930.0  -  1990.0 0.0097  Amp F9W
24E 1930.0  -  1990.0 0.0097  Amp GXW
24E 1930.0  -  1990.0 0.0091  Amp G7W
24E 1850.0  -  1910.0 1.122  Amp F9W
24E 1850.0  -  1910.0 0.933  Amp GXW
24E 1850.0  -  1910.0 1.071  Amp G7W
22H 869.0  -  894.0 0.01  Amp F9W
22H 869.0  -  894.0 0.0125  Amp GXW
22H 869.0  -  894.0 0.0123  Amp G7W
22H 869.0  -  894.0 0.0107  Amp F1D
22H 824.0  -  849.0 1.23  Amp F9W
22H 824.0  -  849.0 1.0  Amp GXW
22H 824.0  -  849.0 1.09  Amp G7W
22H 824.0  -  849.0 1.04  Amp F1D

Power listed is conducted. When used in a fixed installation with a 13 dBi antenna, the uplink (exterior) antenna(s) used for this amplifier must be installed to provide a separation distance of at least 60 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. When used in a vehicle installation with a 5dBi or 6 dBi antenna, a separation distance of at least 20cm from all persons must be maintained. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antennas as listed in this filing. Equipment is an extender.

EAS Grant - Application dqJ/YG84h09aS5NwScqMkg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION 		COPY
Certification

Wilson Electronics, LLC
3301 E. Deseret Drive
St. George, UT 84790
United States 		  Date of Grant: 01/24/2007

Application Dated: 01/24/2007
 
Attention: Erin Elder , IP and Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PWO8012SM
Name of Grantee:  Wilson Electronics, LLC
Equipment Class: PCS Licensed Transmitter
Notes: WIRELESS CELL PHONE AMPLIFIER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24E 1930.0  -  1990.0 0.0097  Amp F9W
24E 1930.0  -  1990.0 0.0097  Amp GXW
24E 1930.0  -  1990.0 0.0091  Amp G7W
24E 1850.0  -  1910.0 1.122  Amp F9W
24E 1850.0  -  1910.0 0.933  Amp GXW
24E 1850.0  -  1910.0 1.071  Amp G7W
22H 869.0  -  894.0 0.01  Amp F9W
22H 869.0  -  894.0 0.0125  Amp GXW
22H 869.0  -  894.0 0.0123  Amp G7W
22H 869.0  -  894.0 0.0107  Amp F1D
22H 824.0  -  849.0 1.23  Amp F9W
22H 824.0  -  849.0 1.0  Amp GXW
22H 824.0  -  849.0 1.09  Amp G7W
22H 824.0  -  849.0 1.04  Amp F1D

Power listed is conducted. When used in a fixed installation with a 13 dBi antenna, the uplink (exterior) antenna(s) used for this amplifier must be installed to provide a separation distance of at least 60 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. When used in a vehicle installation with a 5dBi or 6 dBi antenna, a separation distance of at least 20cm from all persons must be maintained. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antennas as listed in this filing. Equipment is an extender.



Mail To:


EA632516