1. FCC ID
  2. PWO
  3. PWO806D

FCC ID PWO806D

IDEN Bi-Directional Amplifier Direct

by Wilson Electronics, LLC

Grantee Code: PWO   Product Code: 806D
Latest application date: 2004-07-16

FCC ID Device Details

FCC IDPWO806D
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePWO
Product Code806D
Applicant BusinessWilson Electronics, LLC 🇺🇸
Related Domains wilsonelectronics.com ckc.com
Equipment ClassIDEN Bi-Directional Amplifier Direct
Test FirmCKC Laboratories, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
806-821 MHzOriginal Equipment2004-07-16
806-821 MHzOriginal Equipment2004-04-08
806-821 MHzOriginal Equipment2004-01-29

Exhibits

DocumentTypeAvailableFile
Direct Connection Instructions 1Users Manual2004-07-16PDF 400 KB
Direct Connection Instructions 2Users Manual2004-07-16PDF 420.2 KB
RF WarningsUsers Manual2004-07-16PDF 31 KB
Users Manual 1Users Manual2004-07-16PDF 400 KB
Users Manual 2Users Manual2004-07-16PDF 496.3 KB
RF Warning Metadata onlyUsers ManualPDF 31 KB
Users Manual Metadata onlyUsers ManualPDF 687 KB
Users Manual Part 1 Metadata onlyUsers ManualPDF 400 KB
Users Manual Part 2 Metadata onlyUsers ManualPDF 496.3 KB
Internal PhotosInternal Photos2004-07-16PDF 289.5 KB
External PhotosExternal Photos2004-07-16PDF 261 KB
LabelID Label/Location Info2004-07-16PDF 34.6 KB
Label LocationID Label/Location Info2004-07-16PDF 191 KB
Operational Description 1Operational Description2004-07-16PDF 154.5 KB
Operational Description 2Operational Description2004-07-16PDF 154 KB
Operational Description 3Operational Description2004-07-16PDF 251.8 KB
Operational Description 4Operational Description2004-07-16PDF 227.3 KB
AMPS Band Metadata onlyOperational DescriptionPDF 154.5 KB
Antenna Spec Metadata onlyOperational DescriptionPDF 251.8 KB
IDEN Band Metadata onlyOperational DescriptionPDF 154 KB
Mini Specs Metadata onlyOperational DescriptionPDF 227.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 33.5 KB
Test Setup PhotosTest Setup Photos2004-07-16PDF 211.1 KB
Test Setup Photos Metadata onlyTest Setup PhotosPDF 211.1 KB
Test Setup Photos Metadata onlyTest Setup PhotosPDF 211.1 KB
Test ReportTest Report2004-07-16PDF 2.3 MB
Test Report Metadata onlyTest ReportPDF 1.1 MB
Confidentiality LetterCover Letter(s)2004-07-16PDF 170.5 KB
TCB ResponsesCover Letter(s)2004-07-16PDF 37.8 KB
RF Exposure InfoRF Exposure Info2004-07-16PDF 964.4 KB
Tune Up InfoParts List/Tune Up Info2004-07-16PDF 22.1 KB
MPE Calculations Metadata onlyRF Exposure InfoPDF 125.1 KB
RF Exposure Info Metadata onlyRF Exposure InfoPDF 31 KB
Tuneup Info Metadata onlyParts List/Tune Up InfoPDF 22.1 KB
Schematics Metadata onlySchematicsPDF 410.6 KB

Application Information

Application IDjm5gQoXyqG7nPhm9dX5q5Q==
Final Action Date2004-07-16
Application PurposeOriginal Equipment
Applicant FRN0017528332
Model806D
Frequency Range806-821 MHz
Equipment ClassAMP - Amplifier
Device DescriptionIDEN Bi-Directional Amplifier Direct
Responsible PartyMikel Parry, Compliance Manager, mparry@wilsonelectronics.com , 435-673-5021
AgentMary Ellen Mary Ellen Mary Ellen, CKC Laboratories, Inc., reports@ckc.com , 209-966-5240
Technical ContactMary Ellen Clayton, CKC Laboratories, Inc., reports@ckc.com , 209-966-5240
Non-Technical ContactMary Ellen Clayton, CKC Laboratories, Inc., reports@ckc.com , 209-966-5240
Test FirmSteve Behm, CKC Laboratories, Inc., qa@ckc.com , 209-966-5240
TCB Emailinfo@ckccertification.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output is Conducted. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. Minimum cable loss 0.6dB. Fixed Exposure Conditions: Maximum antenna gain of +13dBi can be used as documented in this filing. Antenna(s) used for this device must be fixed-mounted on towers, roof-tops or similar conditions to satisfy RF exposure compliance. Mobile Exposure Conditions: Maximum antenna gain of +5.12 dBi can be used as documented in this filing. Antenna(s) used for this device must be installed to provide a minimum separation distance as specified in this filing from persons during normal operation. Minimum separation distance is 20 cm.

Applications

Application IDDatePurpose
jm5gQoXyqG7nPhm9dX5q5Q==2004-07-16Original Equipment
wJLZCyXZ5NsKM5ASX+v3JQ==2004-04-08Original Equipment
BbWdZ3OhIlyfZxx2Zjhsvw==2004-01-29Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
806-821 MHz3.0000000AmpGXW90BB

Grants

TCB Grant - Application wJLZCyXZ5NsKM5ASX+v3JQ==

This application does not exist.

EAS Grant - Application wJLZCyXZ5NsKM5ASX+v3JQ==

This application currently is not in final status.

TCB Grant - Application jm5gQoXyqG7nPhm9dX5q5Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CKC Certification Services, LLC
5046 Sierra Pines
Mariposa, CA 95338
 Date of Grant: 07/16/2004

Application Dated: 07/16/2004
Wilson Electronics, LLC
3301 E. Deseret Drive
St. George, UT 84790
 
Attention: Mikel Parry , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PWO806D
Name of Grantee:  Wilson Electronics, LLC
Equipment Class: Amplifier
Notes: IDEN Bi-Directional Amplifier Direct
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BB 90 806.0  -  821.0 3.0  Amp GXW

Power Output is Conducted. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. Minimum cable loss 0.6dB.

Fixed Exposure Conditions: Maximum antenna gain of +13dBi can be used as documented in this filing. Antenna(s) used for this device must be fixed-mounted on towers, roof-tops or similar conditions to satisfy RF exposure compliance.

Mobile Exposure Conditions: Maximum antenna gain of +5.12 dBi can be used as documented in this filing. Antenna(s) used for this device must be installed to provide a minimum separation distance as specified in this filing from persons during normal operation. Minimum separation distance is 20 cm.


BB: Power output continuously variable from value listed to less than 0.5 watts.

EAS Grant - Application jm5gQoXyqG7nPhm9dX5q5Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Wilson Electronics, LLC
3301 E. Deseret Drive
St. George, UT 84790
United States 		  Date of Grant: 07/16/2004

Application Dated: 07/16/2004
 
Attention: Mikel Parry , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PWO806D
Name of Grantee:  Wilson Electronics, LLC
Equipment Class: Amplifier
Notes: IDEN Bi-Directional Amplifier Direct
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BB 90 806.0  -  821.0 3.0  Amp GXW

Power Output is Conducted. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. Minimum cable loss 0.6dB.

Fixed Exposure Conditions: Maximum antenna gain of +13dBi can be used as documented in this filing. Antenna(s) used for this device must be fixed-mounted on towers, roof-tops or similar conditions to satisfy RF exposure compliance.

Mobile Exposure Conditions: Maximum antenna gain of +5.12 dBi can be used as documented in this filing. Antenna(s) used for this device must be installed to provide a minimum separation distance as specified in this filing from persons during normal operation. Minimum separation distance is 20 cm.


BB: Power output continuously variable from value listed to less than 0.5 watts.

TCB Grant - Application BbWdZ3OhIlyfZxx2Zjhsvw==

This application does not exist.

EAS Grant - Application BbWdZ3OhIlyfZxx2Zjhsvw==

This application currently is not in final status.
Mail To: