FCC ID PY310400146

PUSH2TV

by Netgear Incorporated

Grantee Code: PY3   Product Code: 10400146
Latest application date: 2010-12-21

FCC ID Device Details

FCC IDPY310400146
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePY3
Product Code10400146
Applicant BusinessNetgear Incorporated 🇺🇸
Related Domains netgear.com
Equipment ClassPUSH2TV
Test FirmQuietek Corporation

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2010-12-21
5180-5240 MHzOriginal Equipment2010-12-21

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2010-12-21PDF 262.5 KB
Internal PhotosInternal Photos2010-12-21PDF 1.7 MB
External PhotosExternal Photos2010-12-21PDF 176.8 KB
Label LocationID Label/Location Info2010-12-21PDF 134.9 KB
Label SampleID Label/Location Info2010-12-21PDF 134.9 KB
Operational DescriptionOperational Description2010-12-21PDF 32.6 KB
Operational DescriptionOperational Description2010-12-21PDF 32.6 KB
Test Setup PhotosTest Setup Photos2010-12-21PDF 348 KB
Test ReportTest Report2010-12-21PDF 4.7 MB
Test Report part 1Test Report2010-12-21PDF 4.3 MB
Test Report part 2Test Report2010-12-21PDF 4.9 MB
Attestation LetterCover Letter(s)2010-12-21PDF 20.4 KB
Confidential LetterCover Letter(s)2010-12-21PDF 31.6 KB
DOC LetterCover Letter(s)2010-12-21PDF 26.4 KB
Declaration LetterCover Letter(s)2010-12-21PDF 22.3 KB
RF ExposureRF Exposure Info2010-12-21PDF 43.6 KB

Application Information

Application IDMYNm/LZwHGzNfU1LFNUPzw==
Final Action Date2010-12-21
Application PurposeOriginal Equipment
Applicant FRN0022158786
Model10400146
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionPUSH2TV
Responsible PartyDavid Kay, david.kay@netgear.com , 4088903160
Test FirmVincent Lin, Quietek Corporation, Vincent@quietek.com , 886-2-8601-3788
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is maximum combined conducted output power in 802.11n mode. Device is a WLAN operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. When operating in 802.11n, 40MHz mode, the operating frequency segment is limited to 2422 to 2452MHz. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
MYNm/LZwHGzNfU1LFNUPzw==2010-12-21Original Equipment
GJGMm2O3Z9T+iWkj7e6Blw==2010-12-21Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.269115CCC, MO
2422-2452 MHz0.271615CCC, MO
5180-5240 MHz0.019215ECC, MO
5190-5230 MHz0.01915ECC, MO
5745-5825 MHz0.158415CCC, MO
5755-5795 MHz0.154815CCC, MO

Grants

TCB Grant - Application MYNm/LZwHGzNfU1LFNUPzw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 12/21/2010

Application Dated: 12/20/2010
Netgear Incorporated
350 East Plumeria Drive
San Jose, CA 95134
 
Attention: David Kay

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PY310400146
Name of Grantee:  Netgear Incorporated
Equipment Class: Digital Transmission System
Notes: PUSH2TV
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.2691  
CC MO 15C 2422.0  -  2452.0 0.2716  
CC MO 15C 5745.0  -  5825.0 0.1584  
CC MO 15C 5755.0  -  5795.0 0.1548  

Power listed is maximum combined conducted output power in 802.11n mode. Device is a WLAN operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. When operating in 802.11n, 40MHz mode, the operating frequency segment is limited to 2422 to 2452MHz. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application MYNm/LZwHGzNfU1LFNUPzw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Netgear Incorporated
350 East Plumeria Drive
San Jose, CA 95134
United States
  Date of Grant: 12/21/2010

Application Dated: 12/20/2010
 
Attention: David Kay

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PY310400146
Name of Grantee:  Netgear Incorporated
Equipment Class: Digital Transmission System
Notes: PUSH2TV
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.2691  
CC MO 15C 2422.0  -  2452.0 0.2716  
CC MO 15C 5745.0  -  5825.0 0.1584  
CC MO 15C 5755.0  -  5795.0 0.1548  

Power listed is maximum combined conducted output power in 802.11n mode. Device is a WLAN operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. When operating in 802.11n, 40MHz mode, the operating frequency segment is limited to 2422 to 2452MHz. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application GJGMm2O3Z9T+iWkj7e6Blw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 12/21/2010

Application Dated: 12/20/2010
Netgear Incorporated
350 East Plumeria Drive
San Jose, CA 95134
 
Attention: David Kay

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PY310400146
Name of Grantee:  Netgear Incorporated
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: PUSH2TV
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0192  
CC MO 15E 5190.0  -  5230.0 0.019  

Power listed is maximum combined conducted output power in 802.11n mode. Operations in the band 5.15-5.25GHz are restricted to indoor use only. Device is a WLAN operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application GJGMm2O3Z9T+iWkj7e6Blw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Netgear Incorporated
350 East Plumeria Drive
San Jose, CA 95134
United States
  Date of Grant: 12/21/2010

Application Dated: 12/20/2010
 
Attention: David Kay

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PY310400146
Name of Grantee:  Netgear Incorporated
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: PUSH2TV
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0192  
CC MO 15E 5190.0  -  5230.0 0.019  

Power listed is maximum combined conducted output power in 802.11n mode. Operations in the band 5.15-5.25GHz are restricted to indoor use only. Device is a WLAN operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: