FCC ID PY312200201
WLAN 802.11 1x1 SB + BT3.0 SDIO Module for NeoTV Prime
by Netgear Incorporated
Grantee Code: PY3 Product Code: 12200201
Latest application date: 2012-11-26
FCC ID Device Details
| FCC ID | PY312200201 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | PY3 |
| Product Code | 12200201 |
| Applicant Business | Netgear Incorporated 🇺🇸 |
| Related Domains |  netgear.com |
| Equipment Class | WLAN 802.11 1x1 SB + BT3.0 SDIO Module for NeoTV Prime |
| Test Firm | Sporton International Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2012-11-26 |
| 2412-2462 MHz | Original Equipment | 2012-11-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2012-11-26 | PDF 767.2 KB |
| Internal Photos | Internal Photos | 2012-11-26 | PDF 117.6 KB |
| External Photos | External Photos | 2012-11-26 | PDF 844.2 KB |
| FCC ID Label Location | ID Label/Location Info | 2012-11-26 | PDF 101.9 KB |
| Test Setup Photos | Test Setup Photos | 2012-11-26 | PDF 550.5 KB |
| Co-location Report | Test Report | 2012-11-26 | PDF 108.1 KB |
| MPE Report | Test Report | 2012-11-26 | PDF 101.4 KB |
| Test report for DSS | Test Report | 2012-11-26 | PDF 1.2 MB |
| Test report for DTS | Test Report | 2012-11-26 | PDF 1.7 MB |
| Declaration Letter for Modular Approval | Cover Letter(s) | 2012-11-26 | PDF 17.8 KB |
| Declaration Letter_For Ad Hoc | Cover Letter(s) | 2012-11-26 | PDF 70.1 KB |
| LTC request letter | Cover Letter(s) | 2012-11-26 | PDF 70.9 KB |
| POA | Cover Letter(s) | 2012-11-26 | PDF 68.2 KB |
| MPE Report | RF Exposure Info | 2012-11-26 | PDF 101.4 KB |
Application Information
| Application ID | H1Dz5n3AQPakxb/A7zvJqg== |
|---|---|
| Final Action Date | 2012-11-26 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0022158786 |
| Model | 12200201 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | WLAN 802.11 1x1 SB + BT3.0 SDIO Module for NeoTV Prime |
| Responsible Party | David Kay, david.kay@netgear.com , 4088903160 |
| Test Firm | Alex Chen, Sporton International Inc., alex@sporton.com.tw  , 886-3-327-3456 |
| TCB Email | bentje.holger@phoenix-testlab.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| H1Dz5n3AQPakxb/A7zvJqg== | 2012-11-26 | Original Equipment |
| 5FVcIJsNup+Czcd8X7iGNA== | 2012-11-26 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application H1Dz5n3AQPakxb/A7zvJqg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 11/26/2012 Application Dated: 11/26/2012 |
| Netgear Incorporated |
| 350 East Plumeria Drive |
| San Jose, CA 95134 |
| Attention: David Kay |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PY312200201 |
| Name of Grantee: | Netgear Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN 802.11 1x1 SB + BT3.0 SDIO Module for NeoTV Prime |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00111 |
| Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application H1Dz5n3AQPakxb/A7zvJqg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Netgear Incorporated 350 East Plumeria Drive San Jose, CA 95134 United States |
Date of Grant: 11/26/2012 Application Dated: 11/26/2012 |
| Attention: David Kay |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PY312200201 |
| Name of Grantee: | Netgear Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN 802.11 1x1 SB + BT3.0 SDIO Module for NeoTV Prime |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00111 |
| Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 11/26/2012 Application Dated: 11/26/2012 |
| Netgear Incorporated |
| 350 East Plumeria Drive |
| San Jose, CA 95134 |
| Attention: David Kay |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PY312200201 |
| Name of Grantee: | Netgear Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN 802.11 1x1 SB + BT3.0 SDIO Module for NeoTV Prime |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.1486 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.1394 |
| Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 1T1R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile or fixed transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 5FVcIJsNup+Czcd8X7iGNA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Netgear Incorporated 350 East Plumeria Drive San Jose, CA 95134 United States |
Date of Grant: 11/26/2012 Application Dated: 11/26/2012 |
| Attention: David Kay |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PY312200201 |
| Name of Grantee: | Netgear Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN 802.11 1x1 SB + BT3.0 SDIO Module for NeoTV Prime |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.1486 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.1394 |
| Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 1T1R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile or fixed transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |