FCC ID PY318100410

AC2000 Smart WiFi Access Point and Router

by Netgear Incorporated

Grantee Code: PY3   Product Code: 18100410
Latest application date: 2018-05-03

FCC ID Device Details

FCC IDPY318100410
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePY3
Product Code18100410
Applicant BusinessNetgear Incorporated 🇺🇸
Related Domains netgear.com
Equipment ClassAC2000 Smart WiFi Access Point and Router
Test FirmBureau Veritas CPS (H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2018-05-03
5180-5240 MHzOriginal Equipment2018-05-03

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2018-10-31PDF 2.2 MB
User Manual (Statement)Users Manual2018-10-31PDF 85.3 KB
Internal PhotosInternal Photos2018-10-31PDF 809.3 KB
External PhotosExternal Photos2018-10-31PDF 414.5 KB
LabelID Label/Location Info2018-05-03PDF 1,013.5 KB
Label LocationID Label/Location Info2018-05-03PDF 214.1 KB
RF Test Set-Up PhotosTest Setup Photos2018-10-31PDF 276.5 KB
RF Test ReportTest Report2018-05-03PDF 1.4 MB
RF Test ReportTest Report2018-05-03PDF 1,021.4 KB
Authorization LetterCover Letter(s)2018-05-03PDF 84.8 KB
DTS Ch 12 & 13 declaration LetterCover Letter(s)2018-05-03PDF 194.7 KB
STC & LTC LetterCover Letter(s)2018-05-03PDF 133.4 KB
RF Exposure ReportRF Exposure Info2018-05-03PDF 60.8 KB
Block Diagram Metadata onlyBlock DiagramPDF 909.3 KB
Schematics Metadata onlySchematicsPDF 1.2 MB
Antenna Spec. Metadata onlyOperational DescriptionPDF 629.1 KB
NII S/W Security Statement Metadata onlyOperational DescriptionPDF 308 KB
Operational Description Metadata onlyOperational DescriptionPDF 39.9 KB

Application Information

Application IDhp03ebaCyozmFvsKfFNtpw==
Final Action Date2018-05-03
Application PurposeOriginal Equipment
Applicant FRN0022158786
Model18100410
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionAC2000 Smart WiFi Access Point and Router
Responsible PartyDavid Kay, david.kay@netgear.com , 4088903160
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com , +886-(0)3-260-0884
TCB Emailtcb@siemic.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date10/31/2018
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is the conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 20 MHz and 40 MHz bandwidth modes. This device is 2X2 MIMO.

Applications

Application IDDatePurpose
hp03ebaCyozmFvsKfFNtpw==2018-05-03Original Equipment
JI8VZXIAp9rzVjNrpUA1ng==2018-05-03Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.593000015CCC, MO
5180-5240 MHz0.72415ECC, MO
5745-5825 MHz0.8315ECC, MO

Grants

TCB Grant - Application JI8VZXIAp9rzVjNrpUA1ng==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 05/03/2018

Application Dated: 05/03/2018
Netgear Incorporated
350 East Plumeria Drive
San Jose, CA 95134
 
Attention: David Kay

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PY318100410
Name of Grantee:  Netgear Incorporated
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AC2000 Smart WiFi Access Point and Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.724  
CC MO 15E 5745.0  -  5825.0 0.83  

Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filling or in accordance with FCC multi-transmitter product guidelines. This device has 20, 40, and 80MHz bandwidth modes. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This Device is 4X4 MIMO

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application JI8VZXIAp9rzVjNrpUA1ng==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Netgear Incorporated
350 East Plumeria Drive
San Jose, CA 95134
United States
  Date of Grant: 05/03/2018

Application Dated: 05/03/2018
 
Attention: David Kay

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PY318100410
Name of Grantee:  Netgear Incorporated
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AC2000 Smart WiFi Access Point and Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.724  
CC MO 15E 5745.0  -  5825.0 0.83  

Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filling or in accordance with FCC multi-transmitter product guidelines. This device has 20, 40, and 80MHz bandwidth modes. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This Device is 4X4 MIMO


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application hp03ebaCyozmFvsKfFNtpw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 05/03/2018

Application Dated: 05/03/2018
Netgear Incorporated
350 East Plumeria Drive
San Jose, CA 95134
 
Attention: David Kay

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PY318100410
Name of Grantee:  Netgear Incorporated
Equipment Class: Digital Transmission System
Notes: AC2000 Smart WiFi Access Point and Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.593  

Power listed is the conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 20 MHz and 40 MHz bandwidth modes. This device is 2X2 MIMO.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application hp03ebaCyozmFvsKfFNtpw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Netgear Incorporated
350 East Plumeria Drive
San Jose, CA 95134
United States
  Date of Grant: 05/03/2018

Application Dated: 05/03/2018
 
Attention: David Kay

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PY318100410
Name of Grantee:  Netgear Incorporated
Equipment Class: Digital Transmission System
Notes: AC2000 Smart WiFi Access Point and Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.593  

Power listed is the conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 20 MHz and 40 MHz bandwidth modes. This device is 2X2 MIMO.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: