FCC ID PY326200348

AC1900 WiFi Cable Modem Router

by Netgear Incorporated

Grantee Code: PY3   Product Code: 26200348
Latest application date: 2016-09-30

FCC ID Device Details

FCC IDPY326200348
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePY3
Product Code26200348
Applicant BusinessNetgear Incorporated 🇺🇸
Related Domains netgear.com
Equipment ClassAC1900 WiFi Cable Modem Router
Test FirmBureau Veritas CPS (H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-09-30
2412-2462 MHzOriginal Equipment2016-08-19
5180-5240 MHzOriginal Equipment2016-08-19

Exhibits

DocumentTypeAvailableFile
User Manual rev.pdfUsers Manual2017-02-15PDF 655.5 KB
Internal Photos.pdfInternal Photos2017-02-15PDF 2.5 MB
External Photos.pdfExternal Photos2017-02-15PDF 744.2 KB
ID Label Location Information.pdfID Label/Location Info2016-08-19PDF 495 KB
Test Setup PhotoTest Setup Photos2017-03-13PDF 453.1 KB
Test Setup Photo (DFS)Test Setup Photos2017-03-13PDF 251.7 KB
Test Setup Photo.pdfTest Setup Photos2017-02-15PDF 453.3 KB
Test Report (DFS)Test Report2016-09-30PDF 3.2 MB
Test Report (NII) revTest Report2016-09-30PDF 1.3 MB
Test Report (DTS) rev.pdfTest Report2016-08-19PDF 1.5 MB
Test Report (NII) rev.pdfTest Report2016-08-19PDF 1.5 MB
Attestation - DFS DeclarationAttestation Statements2016-09-30PDF 623.1 KB
Attestation - Channel and Mode Declaration.pdfAttestation Statements2016-08-19PDF 133.4 KB
Cover Letter - Agent AuthorizationCover Letter(s)2016-09-30PDF 126.8 KB
Cover Letter - Confidentiality Request - Long TermCover Letter(s)2016-09-30PDF 196 KB
Cover Letter - Confidentiality Request - Short TermCover Letter(s)2016-09-30PDF 381.6 KB
Cover Letter - Description of ChangeCover Letter(s)2016-09-30PDF 407 KB
Cover Letter - Agent Authorization.pdfCover Letter(s)2016-08-19PDF 126.8 KB
Cover Letter - Confidentiality Request - Long Term.pdfCover Letter(s)2016-08-19PDF 193.6 KB
Cover Letter - Confidentiality Request - Short Term.pdfCover Letter(s)2016-08-19PDF 378.4 KB
RF Exposure Information (MPE)RF Exposure Info2016-09-30PDF 234.5 KB
RF Exposure Information (MPE).pdfRF Exposure Info2016-08-19PDF 235.4 KB
Block Diagram.pdf Metadata onlyBlock DiagramPDF 48 KB
Schematics.pdf Metadata onlySchematicsPDF 1.1 MB
Operational Description Metadata onlyOperational DescriptionPDF 34.1 KB
Operational Description.pdf Metadata onlyOperational DescriptionPDF 30.5 KB
Software Operating Description Metadata onlyOperational DescriptionPDF 286.5 KB
Software Operating Description rev Metadata onlyOperational DescriptionPDF 86.7 KB
Software Operating Description.pdf Metadata onlyOperational DescriptionPDF 264.9 KB

Application Information

Application ID4XtIW9e6R1WHQxLXCquxuw==
Final Action Date2016-09-30
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0022158786
Model26200348
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionAC1900 WiFi Cable Modem Router
Responsible PartyDavid Kay, david.kay@netgear.com , 4088903160
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com , +886-(0)3-260-0884
TCB Emailcertification@curtis-straus.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date03/13/2017
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsClass II Permissive Change for adding DFS bands by software enabling. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 29 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. Operations in the 5.15-5.25GHz band are restricted to indoor usage

Applications

Application IDDatePurpose
4XtIW9e6R1WHQxLXCquxuw==2016-09-30Class II permissive change or modification of presently authorized equipment
KZuyPfDS/FAvhIWNDCYWpQ==2016-08-19Original Equipment
2mhKhA9itKMmCQKHFH5HQQ==2016-08-19Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.989000015CCC, MO
5180-5240 MHz0.96615E38, CC, MO
5180-5240 MHz0.99615E38, CC, MO
5260-5320 MHz0.24515E38, CC, MO, ND
5500-5700 MHz0.24315E38, CC, MO, ND
5745-5825 MHz0.96815E38, CC, MO

Grants

TCB Grant - Application KZuyPfDS/FAvhIWNDCYWpQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 08/19/2016

Application Dated: 08/19/2016
Netgear Incorporated
350 East Plumeria Drive
San Jose, CA 95134
 
Attention: David Kay

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PY326200348
Name of Grantee:  Netgear Incorporated
Equipment Class: Digital Transmission System
Notes: AC1900 WiFi Cable Modem Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.989  

Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 29 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 20 MHz and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application KZuyPfDS/FAvhIWNDCYWpQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Netgear Incorporated
350 East Plumeria Drive
San Jose, CA 95134
United States
  Date of Grant: 08/19/2016

Application Dated: 08/19/2016
 
Attention: David Kay

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PY326200348
Name of Grantee:  Netgear Incorporated
Equipment Class: Digital Transmission System
Notes: AC1900 WiFi Cable Modem Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.989  

Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 29 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 20 MHz and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 4XtIW9e6R1WHQxLXCquxuw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 09/30/2016

Application Dated: 09/14/2016
Netgear Incorporated
350 East Plumeria Drive
San Jose, CA 95134
 
Attention: David Kay

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PY326200348
Name of Grantee:  Netgear Incorporated
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AC1900 WiFi Cable Modem Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.996  
38 CC MO 15E 5745.0  -  5825.0 0.968  
38 CC MO ND 15E 5260.0  -  5320.0 0.245  
38 CC MO ND 15E 5500.0  -  5700.0 0.243  

Class II Permissive Change for adding DFS bands by software enabling. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 29 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. Operations in the 5.15-5.25GHz band are restricted to indoor usage

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application 4XtIW9e6R1WHQxLXCquxuw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Netgear Incorporated
350 East Plumeria Drive
San Jose, CA 95134
United States
  Date of Grant: 09/30/2016

Application Dated: 09/14/2016
 
Attention: David Kay

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PY326200348
Name of Grantee:  Netgear Incorporated
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AC1900 WiFi Cable Modem Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.996  
38 CC MO 15E 5745.0  -  5825.0 0.968  
38 CC MO ND 15E 5260.0  -  5320.0 0.245  
38 CC MO ND 15E 5500.0  -  5700.0 0.243  

Class II Permissive Change for adding DFS bands by software enabling. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 29 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. Operations in the 5.15-5.25GHz band are restricted to indoor usage


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 2mhKhA9itKMmCQKHFH5HQQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 08/19/2016

Application Dated: 08/19/2016
Netgear Incorporated
350 East Plumeria Drive
San Jose, CA 95134
 
Attention: David Kay

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PY326200348
Name of Grantee:  Netgear Incorporated
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AC1900 WiFi Cable Modem Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.966  
38 CC MO 15E 5745.0  -  5825.0 0.968  

Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 29 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 2mhKhA9itKMmCQKHFH5HQQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Netgear Incorporated
350 East Plumeria Drive
San Jose, CA 95134
United States
  Date of Grant: 08/19/2016

Application Dated: 08/19/2016
 
Attention: David Kay

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PY326200348
Name of Grantee:  Netgear Incorporated
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AC1900 WiFi Cable Modem Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.966  
38 CC MO 15E 5745.0  -  5825.0 0.968  

Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 29 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: