FCC ID PY3AC781S
Wireless Mobile HotSpot
by Netgear Incorporated
Grantee Code: PY3 Product Code: AC781S
Latest application date: 2013-10-17
FCC ID Device Details
| FCC ID | PY3AC781S |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | PY3 |
| Product Code | AC781S |
| Applicant Business | Netgear Incorporated 🇺🇸 |
| Related Domains | |
| Equipment Class | Wireless Mobile HotSpot |
| Test Firm | A Test Lab Techno Corp. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5220 MHz | Original Equipment | 2013-10-17 |
| 2412-2462 MHz | Original Equipment | 2013-10-17 |
| 706.5-713.5 MHz | Original Equipment | 2013-10-17 |
Exhibits
Application Information
| Application ID | tFG36JWNQgvfReuHu8H4Gw== |
|---|---|
| Final Action Date | 2013-10-17 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0022158786 |
| Model | AC781S |
| Frequency Range | 5180-5220 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Wireless Mobile HotSpot |
| Responsible Party | David Kay, david.kay@netgear.com |
| Technical Contact | Murphy Wang, A Test Lab Techno Corp., Murphy@atl-lab.com.tw |
| Test Firm | Eric Chan, A Test Lab Techno Corp., Eric.Chan@atl-lab.com.tw |
| TCB Email | hotline@acbcert.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 04/16/2014 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Power Output listed is conducted. Device is an IEEE 802.11n in a 2 x 2 Spatial Multiplexing MIMO configuration as described in this filing. End users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR for simultaneous transmission exposure condition is 1.32 W/kg. This device has a 20 MHz and 40 MHz bandwidth mode and contains WLAN (DTS 2.4G and 5.8G) and WCDMA/LTE transmitters. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| tFG36JWNQgvfReuHu8H4Gw== | 2013-10-17 | Original Equipment |
| inRBoObNcvtLKT6+SkJoiQ== | 2013-10-17 | Original Equipment |
| 7pHFirYRwU31SaSsdPLdBA== | 2013-10-17 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 706.5-713.5 MHz | 0.122 | 2.5ppm | 4M47G7D | 27 | BC |
| 706.5-713.5 MHz | 0.113 | 2.5ppm | 8M94G7D | 27 | BC |
| 824.7-848.3 MHz | 0.118 | 2.5ppm | 1M08G7D | 22H | BC |
| 824.7-848.3 MHz | 0.126 | 2.5ppm | 2M69G7D | 22H | BC |
| 824.7-848.3 MHz | 0.136 | 2.5ppm | 4M48G7D | 22H | BC |
| 824.7-848.3 MHz | 0.107 | 2.5ppm | 8M94G7D | 22H | BC |
| 1710.7-1754.3 MHz | 0.166 | 2.5ppm | 2M69G7D | 27 | BC |
| 1710.7-1754.3 MHz | 0.161 | 2.5ppm | 4M46G7D | 27 | BC |
| 1710.7-1754.3 MHz | 0.142 | 2.5ppm | 8M94G7D | 27 | BC |
| 1710.7-1754.3 MHz | 0.15 | 2.5ppm | 13M4G7D | 27 | BC |
| 1710.7-1754.3 MHz | 0.143 | 2.5ppm | 17M8G7D | 27 | BC |
| 1710.7-1754.3 MHz | 0.17 | 2.5ppm | 1M07G7D | 27 | BC |
| 1850.7-1909.3 MHz | 0.149 | 2.5ppm | 1M08G7D | 24E | BC |
| 1850.7-1909.3 MHz | 0.154 | 2.5ppm | 2M69G7D | 24E | BC |
| 1850.7-1909.3 MHz | 0.149 | 2.5ppm | 4M47G7D | 24E | BC |
| 1850.7-1909.3 MHz | 0.167 | 2.5ppm | 8M93G7D | 24E | BC |
| 1850.7-1909.3 MHz | 0.148 | 2.5ppm | 13M4G7D | 24E | BC |
| 1850.7-1909.3 MHz | 0.162 | 2.5ppm | 17M8G7D | 24E | BC |
| 2412-2462 MHz | 0.144 | 15C | CC, MO | ||
| 5180-5220 MHz | 0.0580000 | 15E | CC, MO | ||
| 5745-5825 MHz | 0.063 | 15C | CC, MO |
Grants
TCB Grant - Application tFG36JWNQgvfReuHu8H4Gw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/17/2013 Application Dated: 09/26/2013 |
| Netgear Incorporated |
| 350 East Plumeria Drive |
| San Jose, CA 95134 |
| Attention: David Kay |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PY3AC781S |
| Name of Grantee: | Netgear Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Mobile HotSpot |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5220.0 | 0.058 |
| Power Output listed is conducted. Device is an IEEE 802.11n in a 2 x 2 Spatial Multiplexing MIMO configuration as described in this filing. End users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR for simultaneous transmission exposure condition is 1.32 W/kg. This device has a 20 MHz and 40 MHz bandwidth mode and contains WLAN (DTS 2.4G and 5.8G) and WCDMA/LTE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application tFG36JWNQgvfReuHu8H4Gw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Netgear Incorporated 350 East Plumeria Drive San Jose, CA 95134 United States |
Date of Grant: 10/17/2013 Application Dated: 09/26/2013 |
| Attention: David Kay |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PY3AC781S |
| Name of Grantee: | Netgear Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Mobile HotSpot |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5220.0 | 0.058 |
| Power Output listed is conducted. Device is an IEEE 802.11n in a 2 x 2 Spatial Multiplexing MIMO configuration as described in this filing. End users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR for simultaneous transmission exposure condition is 1.32 W/kg. This device has a 20 MHz and 40 MHz bandwidth mode and contains WLAN (DTS 2.4G and 5.8G) and WCDMA/LTE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/17/2013 Application Dated: 09/26/2013 |
| Netgear Incorporated |
| 350 East Plumeria Drive |
| San Jose, CA 95134 |
| Attention: David Kay |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PY3AC781S |
| Name of Grantee: | Netgear Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Mobile HotSpot |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.144 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.063 |
| Power Output listed is conducted. Device is an IEEE 802.11n in a 2 x 2 Spatial Multiplexing MIMO configuration as described in this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 1.0 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are < 0.10 W/kg and 1.32 W/kg, respectively. This device has a 20 MHz and 40 MHz bandwidth mode for 5GHz band and contains WLAN (5G, NII band) and WCDMA/LTE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application inRBoObNcvtLKT6+SkJoiQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Netgear Incorporated 350 East Plumeria Drive San Jose, CA 95134 United States |
Date of Grant: 10/17/2013 Application Dated: 09/26/2013 |
| Attention: David Kay |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PY3AC781S |
| Name of Grantee: | Netgear Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Mobile HotSpot |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.144 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.063 |
| Power Output listed is conducted. Device is an IEEE 802.11n in a 2 x 2 Spatial Multiplexing MIMO configuration as described in this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 1.0 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are < 0.10 W/kg and 1.32 W/kg, respectively. This device has a 20 MHz and 40 MHz bandwidth mode for 5GHz band and contains WLAN (5G, NII band) and WCDMA/LTE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/17/2013 Application Dated: 09/26/2013 |
| Netgear Incorporated |
| 350 East Plumeria Drive |
| San Jose, CA 95134 |
| Attention: David Kay |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PY3AC781S |
| Name of Grantee: | Netgear Incorporated |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Wireless Mobile HotSpot |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 22H | 826.4 - 846.6 | 0.196 | 2.5 PM | 4M18F9W |
| BC | 24E | 1852.4 - 1907.6 | 0.091 | 2.5 PM | 4M17F9W |
| BC | 27 | 706.5 - 713.5 | 0.122 | 2.5 PM | 4M47G7D |
| BC | 27 | 706.5 - 713.5 | 0.113 | 2.5 PM | 8M94G7D |
| BC | 22H | 824.7 - 848.3 | 0.118 | 2.5 PM | 1M08G7D |
| BC | 22H | 824.7 - 848.3 | 0.126 | 2.5 PM | 2M69G7D |
| BC | 22H | 824.7 - 848.3 | 0.136 | 2.5 PM | 4M48G7D |
| BC | 22H | 824.7 - 848.3 | 0.107 | 2.5 PM | 8M94G7D |
| BC | 27 | 1710.7 - 1754.3 | 0.17 | 2.5 PM | 1M07G7D |
| BC | 27 | 1710.7 - 1754.3 | 0.166 | 2.5 PM | 2M69G7D |
| BC | 27 | 1710.7 - 1754.3 | 0.161 | 2.5 PM | 4M46G7D |
| BC | 27 | 1710.7 - 1754.3 | 0.142 | 2.5 PM | 8M94G7D |
| BC | 27 | 1710.7 - 1754.3 | 0.15 | 2.5 PM | 13M4G7D |
| BC | 27 | 1710.7 - 1754.3 | 0.143 | 2.5 PM | 17M8G7D |
| BC | 24E | 1850.7 - 1909.3 | 0.149 | 2.5 PM | 1M08G7D |
| BC | 24E | 1850.7 - 1909.3 | 0.154 | 2.5 PM | 2M69G7D |
| BC | 24E | 1850.7 - 1909.3 | 0.149 | 2.5 PM | 4M47G7D |
| BC | 24E | 1850.7 - 1909.3 | 0.167 | 2.5 PM | 8M93G7D |
| BC | 24E | 1850.7 - 1909.3 | 0.148 | 2.5 PM | 13M4G7D |
| BC | 24E | 1850.7 - 1909.3 | 0.162 | 2.5 PM | 17M8G7D |
| Power Output is ERP for Part 22 and EIRP for Part 24 and part 27. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 1.0 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.28 W/kg and 1.32 W/kg, respectively. This device contains WCDMA function that is not operational in U.S. Territories. This filing is only applicable for 850 MHz LTE/WCDMA, 1700 LTE and 1900 MHz LTE/WCDAM operations. This device contains a 802.11a/b/g/n WLAN transmitters. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
EAS Grant - Application 7pHFirYRwU31SaSsdPLdBA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Netgear Incorporated 350 East Plumeria Drive San Jose, CA 95134 United States |
Date of Grant: 10/17/2013 Application Dated: 09/26/2013 |
| Attention: David Kay |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PY3AC781S |
| Name of Grantee: | Netgear Incorporated |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Wireless Mobile HotSpot |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 22H | 826.4 - 846.6 | 0.196 | 2.5 PM | 4M18F9W |
| BC | 24E | 1852.4 - 1907.6 | 0.091 | 2.5 PM | 4M17F9W |
| BC | 27 | 706.5 - 713.5 | 0.122 | 2.5 PM | 4M47G7D |
| BC | 27 | 706.5 - 713.5 | 0.113 | 2.5 PM | 8M94G7D |
| BC | 22H | 824.7 - 848.3 | 0.118 | 2.5 PM | 1M08G7D |
| BC | 22H | 824.7 - 848.3 | 0.126 | 2.5 PM | 2M69G7D |
| BC | 22H | 824.7 - 848.3 | 0.136 | 2.5 PM | 4M48G7D |
| BC | 22H | 824.7 - 848.3 | 0.107 | 2.5 PM | 8M94G7D |
| BC | 27 | 1710.7 - 1754.3 | 0.17 | 2.5 PM | 1M07G7D |
| BC | 27 | 1710.7 - 1754.3 | 0.166 | 2.5 PM | 2M69G7D |
| BC | 27 | 1710.7 - 1754.3 | 0.161 | 2.5 PM | 4M46G7D |
| BC | 27 | 1710.7 - 1754.3 | 0.142 | 2.5 PM | 8M94G7D |
| BC | 27 | 1710.7 - 1754.3 | 0.15 | 2.5 PM | 13M4G7D |
| BC | 27 | 1710.7 - 1754.3 | 0.143 | 2.5 PM | 17M8G7D |
| BC | 24E | 1850.7 - 1909.3 | 0.149 | 2.5 PM | 1M08G7D |
| BC | 24E | 1850.7 - 1909.3 | 0.154 | 2.5 PM | 2M69G7D |
| BC | 24E | 1850.7 - 1909.3 | 0.149 | 2.5 PM | 4M47G7D |
| BC | 24E | 1850.7 - 1909.3 | 0.167 | 2.5 PM | 8M93G7D |
| BC | 24E | 1850.7 - 1909.3 | 0.148 | 2.5 PM | 13M4G7D |
| BC | 24E | 1850.7 - 1909.3 | 0.162 | 2.5 PM | 17M8G7D |
| Power Output is ERP for Part 22 and EIRP for Part 24 and part 27. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 1.0 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.28 W/kg and 1.32 W/kg, respectively. This device contains WCDMA function that is not operational in U.S. Territories. This filing is only applicable for 850 MHz LTE/WCDMA, 1700 LTE and 1900 MHz LTE/WCDAM operations. This device contains a 802.11a/b/g/n WLAN transmitters. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
| Mail To: |