FCC ID PY3ME103

802.11b Access Point

by Netgear Incorporated

Grantee Code: PY3   Product Code: ME103
Latest application date: 2003-08-30

FCC ID Device Details

FCC IDPY3ME103
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePY3
Product CodeME103
Applicant BusinessNetgear Incorporated 🇺🇸
Related Domains netgear.com elliottlabs.com
Equipment Class802.11b Access Point
Test FirmSporton International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2003-08-30
2412-2462 MHzOriginal Equipment2003-03-26

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2003-08-30PDF 543.6 KB
users manualUsers Manual2003-03-26PDF 541 KB
internal photosInternal Photos2003-03-26PDF 195.6 KB
external photosExternal Photos2003-03-26PDF 142.4 KB
label sample and locationID Label/Location Info2003-03-26PDF 381.3 KB
Ceiling Antenna SpecsOperational Description2003-08-30PDF 382 KB
Omni Antenna Specs Part 1Operational Description2003-08-30PDF 497.5 KB
Omni Antenna Specs Part 2Operational Description2003-08-30PDF 607.2 KB
Omni Antenna Specs Part 3Operational Description2003-08-30PDF 3.8 MB
Panel Antenna SpecsOperational Description2003-08-30PDF 1.4 MB
Summary of AntennasOperational Description2003-08-30PDF 1 MB
operational descriptionOperational Description2003-03-26PDF 9 KB
Test Photos RevisedTest Setup Photos2003-08-30PDF 500.8 KB
test setupTest Setup Photos2003-03-26PDF 79.8 KB
Test Report Part 1 RevisedTest Report2003-08-30PDF 2.9 MB
Test Report Part 2 RevisedTest Report2003-08-30PDF 1.3 MB
test reportTest Report2003-03-26PDF 369.5 KB
Authorization LetterCover Letter(s)2003-08-30PDF 141.8 KB
Comments 1Cover Letter(s)2003-08-30PDF 53.2 KB
Comments 2Cover Letter(s)2003-08-30PDF 42.7 KB
Copy of Original GrantCover Letter(s)2003-08-30PDF 101.1 KB
Response 1ACover Letter(s)2003-08-30PDF 37.1 KB
Response 1BCover Letter(s)2003-08-30PDF 251.5 KB
Response 2Cover Letter(s)2003-08-30PDF 31.2 KB
antenna specificationCover Letter(s)2003-03-26PDF 642.6 KB
confidentiality requestCover Letter(s)2003-03-26PDF 39.5 KB
RF Exposure Info RevisedRF Exposure Info2003-08-30PDF 146.3 KB
block diagram Metadata onlyBlock DiagramPDF 8.3 KB
schematics Metadata onlySchematicsPDF 289.8 KB

Application Information

Application IDZb46FYTBcnVm3X/HRO4Oew==
Final Action Date2003-08-30
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0022158786
ModelME103
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11b Access Point
Responsible PartyDavid Kay, david.kay@netgear.com , 4088903160
AgentJuan Juan Juan, Elliott Laboratories Inc., doc@elliottlabs.com , 408-245-7800
Technical ContactMark Briggs, Elliott Laboratories Inc., doc@elliottlabs.com , 408-245-7800
Non-Technical ContactMark Briggs, Elliott Laboratories Inc., doc@elliottlabs.com , 408-245-7800
Test FirmKathy Lin, Sporton International Inc., kathy@sporton.com.tw , 886-2-2696-2468
TCB Emailhotline@AmericanTCB.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. This Permissive Change filing has added 12 antennas operating in mobile transmitter configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
Zb46FYTBcnVm3X/HRO4Oew==2003-08-30Class II permissive change or modification of presently authorized equipment
hb7vYNbGNh0JOKEb1MKRpQ==2003-03-26Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.060000015CCE
2412-2462 MHz0.060000015C36, CE

Grants

TCB Grant - Application Zb46FYTBcnVm3X/HRO4Oew==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 08/30/2003

Application Dated: 08/29/2003
Netgear Incorporated
350 East Plumeria Drive
San Jose, CA 95134
 
Attention: David Kay

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PY3ME103
Name of Grantee:  Netgear Incorporated
Equipment Class: Digital Transmission System
Notes: 802.11b Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CE 15C 2412.0  -  2462.0 0.06  

Power listed is conducted. This Permissive Change filing has added 12 antennas operating in mobile transmitter configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application Zb46FYTBcnVm3X/HRO4Oew==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Netgear Incorporated
350 East Plumeria Drive
San Jose, CA 95134
United States
  Date of Grant: 08/30/2003

Application Dated: 08/29/2003
 
Attention: David Kay

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PY3ME103
Name of Grantee:  Netgear Incorporated
Equipment Class: Digital Transmission System
Notes: 802.11b Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CE 15C 2412.0  -  2462.0 0.06  

Power listed is conducted. This Permissive Change filing has added 12 antennas operating in mobile transmitter configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application hb7vYNbGNh0JOKEb1MKRpQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 03/26/2003

Application Dated: 03/26/2003
Netgear Incorporated
350 East Plumeria Drive
San Jose, CA 95134
 
Attention: David Kay

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PY3ME103
Name of Grantee:  Netgear Incorporated
Equipment Class: Digital Transmission System
Notes: 802.11b Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.06  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application hb7vYNbGNh0JOKEb1MKRpQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Netgear Incorporated
350 East Plumeria Drive
San Jose, CA 95134
United States
  Date of Grant: 03/26/2003

Application Dated: 03/26/2003
 
Attention: David Kay

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PY3ME103
Name of Grantee:  Netgear Incorporated
Equipment Class: Digital Transmission System
Notes: 802.11b Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.06  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: