84773W GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n and NFC Test Report _20170207_v1 - PY7-84773W_TestRpt_DFS Sony Mobile Communications Inc

Sony Mobile Communications Inc GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n and NFC

FCC ID Filing: PY7-84773W
Purchase on Amazon: GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n and NFC

Trouble Viewing? See the or view the HTML Version or PDF in frame
Page 1 of 84773W GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n and NFC Test Report _20170207_v1 - PY7-84773W_TestRpt_DFS Sony Mobile Communications Inc

FCC DFS Test Report
Report No. : FZ692208-01
DYNAMIC FREQUENCY SELECTION
DFS Test Report
APPLICANT
EQUIPMENT
BRAND NAME
FCC ID
STANDARD
CLASSIFICATION
: Sony Mobile Communications Inc.
: GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII
a/b/g/n and NFC
Sony
PY7-84773W
FCC Part 15 Subpart E
(NII) Unlicensed National Information Infrastructure
The product was received on Sep. 22, 2016 and completely tested on Oct. 15, 2016. We,
SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been
evaluated in accordance with the procedures and shown to be compliant with the applicable
technical standards.
The test results in this report apply exclusively to the tested model / sample. Without written
approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except
in full.
Reviewed by: Joseph Lin / Supervisor
Approved by: Jones Tsai / Manager
SPORTON INTERNATIONAL INC.
No. 52, Hwa Ya 1st Rd., Hwa Ya Technology Park, Kwei-Shan District, Tao Yuan City, Taiwan, R.O.C.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456
FAX : 886-3-328-4978
FCC ID : PY7-84773W
Page Number
: 1 of 20
Report Issued Date : Feb. 06, 2017
Report Version
: Rev. 01
Report Template No.: BU5-FZ15EDFS Version 1.0
FCC DFS Test Report
Report No. : FZ692208-01
TABLE OF CONTENTS
REVISION HISTORY.......................................................................................................................................... 3
SUMMARY OF DYNAMIC FREQUENCY SELECTION TEST.......................................................................... 4
GENERAL DESCRIPTION .......................................................................................................................... 5
1.1
1.2
1.3
1.4
1.5
1.6
REQUIREMENTS AND PARAMETERS FOR DFS TEST .......................................................................... 7
2.1
2.2
2.3
2.4
Applicability of DFS Requirements ................................................................................................... 7
Interference Threshold values, Master or Client incorporating In-Service Monitoring ..................... 9
DFS Response requirement values ................................................................................................ 10
Short Pulse Radar Test Waveforms ............................................................................................... 11
CALIBRATION SETUP AND DFS TEST RESULTS ................................................................................ 12
3.1
3.2
Applicant ........................................................................................................................................... 5
Manufacturer ..................................................................................................................................... 5
Feature of Equipment Under Test .................................................................................................... 5
Testing Site ....................................................................................................................................... 5
Applied Standards ............................................................................................................................ 6
Support Unit used in test configuration and system ......................................................................... 6
Calibration of Radar Waveform ...................................................................................................... 12
In-Service Monitoring: Channel Move Time, Channel Closing Transmission Time and
Non-Occupancy Period ................................................................................................................... 14
LIST OF MEASURING EQUIPMENT ........................................................................................................ 20
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456
FAX : 886-3-328-4978
FCC ID : PY7-84773W
Page Number
: 2 of 20
Report Issued Date : Feb. 06, 2017
Report Version
: Rev. 01
Report Template No.: BU5-FZ15EDFS Version 1.0
FCC DFS Test Report
Report No. : FZ692208-01
REVISION HISTORY
REPORT NO.
VERSION
FZ692208-01
Rev. 01
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456
FAX : 886-3-328-4978
FCC ID : PY7-84773W
DESCRIPTION
Initial issue of report
ISSUED DATE
Feb. 06, 2017
Page Number
: 3 of 20
Report Issued Date : Feb. 06, 2017
Report Version
: Rev. 01
Report Template No.: BU5-FZ15EDFS Version 1.0
FCC DFS Test Report
Report No. : FZ692208-01
SUMMARY OF DYNAMIC FREQUENCY SELECTION TEST
UNII
UNII Band 2-C
5470-5725MHz
Bandwidth
and
Channel
40MHz
(CH102)
5510MHz
Description
Measured
Limit
Result
Channel Move Time
0.6273 sec
10 sec
Pass
Channel Closing
Transmission time
Non-Occupancy
Period and Client
Beacon Test
<200ms +
200 ms +
4.4 ms
aggregate of 60 ms over
(aggregate)
remaining 10 s period
No transmission
or Beacons
30 minutes
occurred
Pass
Pass
Note: Since the product is client without radar detection function, only Channel Move Time, Channel
Closing Transmission Time and Non-Occupancy Period Test are required to be performed.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456
FAX : 886-3-328-4978
FCC ID : PY7-84773W
Page Number
: 4 of 20
Report Issued Date : Feb. 06, 2017
Report Version
: Rev. 01
Report Template No.: BU5-FZ15EDFS Version 1.0
FCC DFS Test Report
Report No. : FZ692208-01
1 General Description
1.1 Applicant
Sony Mobile Communications Inc.
4-12-3 Higashi-Shinagawa, Shinagawa-ku, Tokyo, 140-0002, Japan
1.2 Manufacturer
Sony Mobile Communications Inc.
4-12-3 Higashi-Shinagawa, Shinagawa-ku, Tokyo, 140-0002, Japan
1.3 Feature of Equipment Under Test
GSM/WCDMA/LTE, Bluetooth, DTS/UNII, a/b/g/n, GPS, and NFC
Antenna Type / Gain
Standards-related Product Specification
PIFA Antenna type with gain -1.50 dBi
EUT Information List
Performed
HW Version
SW Version
S/N
0.85
RQ3002HXP8
Test Item
DFS
Note:
1.
Above EUT list and accessory list used are electrically identical per declared by manufacturer.
2.
Above the accessories list are used to exercise the EUT during test.
3.
For other wireless features of this EUT, test report will be issued separately.
1.4 Testing Site
Test Site
SPORTON INTERNATIONAL INC.
st
No. 52, Hwa Ya 1 Rd., Hwa Ya Technology Park,
Test Site Location
Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C.
TEL: +886-3-3273456 / FAX: +886-3-3284978
Test Site No.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456
FAX : 886-3-328-4978
FCC ID : PY7-84773W
Sporton Site No.
DFS02-HY
Page Number
: 5 of 20
Report Issued Date : Feb. 06, 2017
Report Version
: Rev. 01
Report Template No.: BU5-FZ15EDFS Version 1.0
FCC DFS Test Report
Report No. : FZ692208-01
1.5 Applied Standards
According to the specifications of the manufacturer, the EUT must comply with the requirements of the
following standards:

FCC Part 15 Subpart E

FCC KDB 905462 D02 UNII DFS Compliance Procedures New Rules v02

FCC KDB 905462 D03 UNII Clients Without Radar Detection New Rules v01r02
Remark: All test items were verified and recorded according to the standards and without any deviation
during the test.
1.6 Support Unit used in test configuration and system
Item Equipment Trade Name
Model Name
FCC ID
HW / FW Version
Air-AP3702E-A-K9
LDK102087
Power Cord
HW: V01
1.
WLAN AP
Cisco
Unshielded, 1.8 m
FW:15.2(4)JB6
AC I/P:
Unshielded, 1.2 m
2.
Notebook
Lenovo
Edge E335
PPD-AR5B95
N/A
DC O/P:
Shielded, 1.8 m
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456
FAX : 886-3-328-4978
FCC ID : PY7-84773W
Page Number
: 6 of 20
Report Issued Date : Feb. 06, 2017
Report Version
: Rev. 01
Report Template No.: BU5-FZ15EDFS Version 1.0
FCC DFS Test Report
Report No. : FZ692208-01
2 Requirements and Parameters for DFS Test
2.1 Applicability of DFS Requirements
EUT is client and operates as client without radar detection function.
Table 1: Applicability of DFS Requirements Prior to Use of a Channel
Operational Mode
Requirement
Master
Client
Client With
Without Radar
Radar
Detection
Detection
Non-Occupancy Period
Yes
Not required
Yes
DFS Detection Threshold
Yes
Not required
Yes
Channel Availability Check Time
Yes
Not required
Not required
U-NII Detection Bandwidth
Yes
Not required
Yes
Table 2: Applicability of DFS requirements during normal operation
Operational Mode
Requirement
Master
Client
Client
Without Radar
With Radar
Detection
Detection
DFS Detection Threshold
Yes
Not required
Yes
Channel Closing Transmission Time
Yes
Yes
Yes
Channel Move Time
Yes
Yes
Yes
U-NII Detection Bandwidth
Yes
Not required
Yes
Client Beacon Test
N/A
Yes
Yes
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456
FAX : 886-3-328-4978
FCC ID : PY7-84773W
Page Number
: 7 of 20
Report Issued Date : Feb. 06, 2017
Report Version
: Rev. 01
Report Template No.: BU5-FZ15EDFS Version 1.0
FCC DFS Test Report
Report No. : FZ692208-01
Operational Mode
Additional requirements for devices
Master or
with multiple bandwidth modes
Client With
Radar Detection
U-NII Detection Bandwidth and
All BW modes
Statistical Performance Check
must be tested
Channel Move Time and Channel
Test using widest BW
Closing Transmission Time
mode available
All other tests
Any single BW mode
Client
Without Radar Detection
Not required
Test using the widest
BW mode available
for the link
Not required
Note
Frequencies selected for statistical performance check (Section 7.8.4) should include
several frequencies within the radar detection bandwidth and frequencies near the edge of
the radar detection bandwidth. For 802.11 devices it is suggested to select frequencies in
each of the bonded 20 MHz channels and the channel center frequency.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456
FAX : 886-3-328-4978
FCC ID : PY7-84773W
Page Number
: 8 of 20
Report Issued Date : Feb. 06, 2017
Report Version
: Rev. 01
Report Template No.: BU5-FZ15EDFS Version 1.0
FCC DFS Test Report
Report No. : FZ692208-01
2.2 Interference Threshold values, Master or Client incorporating
In-Service Monitoring
Maximum Transmit Power
Value (see notes 1 and 2)
≥ 200 milliwatt
-64 dBm
< 200 milliwatt
-62 dBm
Note 1: This is the level at the input of the receiver assuming a 0 dBi receive antenna.
Note 2: Throughout these test procedures an additional 1 dB has been added to the amplitude of the
test transmission waveforms to account for variations in measurement equipment. This will ensure
that the test signal is at or above the detection threshold level to trigger a DFS response.
The radar Detection Threshold, lowest antenna gain is the parameter of Interference radar DFS
detection threshold, The Interference Detection Threshold is the ( -62dBm) + (0) [dBi]+ 1 dB= -61 dBm.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456
FAX : 886-3-328-4978
FCC ID : PY7-84773W
Page Number
: 9 of 20
Report Issued Date : Feb. 06, 2017
Report Version
: Rev. 01
Report Template No.: BU5-FZ15EDFS Version 1.0
FCC DFS Test Report
Report No. : FZ692208-01
2.3 DFS Response requirement values
Parameter
Value
Non-occupancy period
Minimum 30 minutes
Channel Availability Check Time
60 seconds
Channel Move Time
10 seconds See Note 1.
Channel Closing Transmission Time
200 milliseconds + an aggregate of 60 milliseconds over
remaining 10 second period. See Notes 1 and 2.
U-NII Detection Bandwidth
Minimum 100% of the 99% power bandwidth
See Note 3.
Note 1: The instant that the Channel Move Time and the Channel Closing Transmission Time begins
is as follows:
• For the Short pulse radar Test Signals this instant is the end of the Burst.
• For the Frequency Hopping radar Test Signal, this instant is the end of the last radar Burst
generated.
• For the Long Pulse radar Test Signal this instant is the end of the 12 second period defining the
radar transmission.
Note 2: The Channel Closing Transmission Time is comprised of 200 milliseconds starting at the
beginning of the Channel Move Time plus any additional intermittent control signals required to
facilitate Channel changes (an aggregate of 60 milliseconds) during the remainder of the 10 second
period. The aggregate duration of control signals will not count quiet periods in between
transmissions.
Note 3: During the U-NII Detection Bandwidth detection test, radar type 0 is used and for each
frequency step the minimum percentage of detection is 90%. Measurements are performed with no
data traffic.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456
FAX : 886-3-328-4978
FCC ID : PY7-84773W
Page Number
: 10 of 20
Report Issued Date : Feb. 06, 2017
Report Version
: Rev. 01
Report Template No.: BU5-FZ15EDFS Version 1.0
FCC DFS Test Report
Report No. : FZ692208-01
2.4 Short Pulse Radar Test Waveforms
As the EUT is a Client Device with no Radar Detection, only one type radar pulse is required for the
testing. Radar Pulse type 0 was used in the evaluation of the Client device for the purpose of
measuring the Channel Move Time and the Channel Closing Transmission Time.
Radar
Type
Minimum
Pulse
Width
PRI (µsec)
Number of Pulses
(µsec)
Percentage of
Minimum
Successful
Trials
Detection
1428
1-5
150-230
6-10
11-20
18
60%
30
60%
30
23-29
60%
30
200-500
16-18
60%
30
200-500
12-16
60%
30
80%
120
Test A
Test B
Aggregate (Radar Types 1-4)
Test A: 15 unique PRI values randomly selected from the list of 23 PRI values in Table 5a
Test B: 15 unique PRI values randomly selected within the range of 518-3066 μsec, with a minimum
increment of 1 μsec, excluding PRI values selected in Test A
A minimum of 30 unique waveforms are required for each of the short pulse radar types 2 through 4.
For short pulse radar type 1, the same waveform is used a minimum of 30 times. If more than 30
waveforms are used for short pulse radar types 2 through 4, then each additional waveform must also
be unique and not repeated from the previous waveforms.
If more than 30 waveforms are used for Short Pulse Radar Type 1, then each additional waveform is
generated with Test B and must also be unique and not repeated from the previous waveforms in Tests
A or B.
The aggregate is the average of the percentage of successful detections of short pulse radar types 1-4.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456
FAX : 886-3-328-4978
FCC ID : PY7-84773W
Page Number
: 11 of 20
Report Issued Date : Feb. 06, 2017
Report Version
: Rev. 01
Report Template No.: BU5-FZ15EDFS Version 1.0
FCC DFS Test Report
Report No. : FZ692208-01
3 Calibration Setup and DFS Test Results
3.1 Calibration of Radar Waveform
3.1.1 Radar Waveform Calibration Procedure
The Interference Radar Detection Threshold Level is (-62dBm) + (0) [dBi]+ 1 dB= -61dBm that had
been taken into account the output power range and antenna gain. The following equipment setup was
used to calibrate the radiated Radar Waveform. A vector signal generator was utilized to establish the
test signal level for radar type 0. During this process there were no transmissions by either the Master
or Client Device. The spectrum analyzer was switched to the zero span (Time Domain) at the frequency
of the Radar Waveform generator. Peak detection was used. The spectrum analyzer resolution
bandwidth (RBW) and video bandwidth (VBW) were set to 3 MHz to measure the type 0 radar
waveform. The spectrum analyzer had offset -3.7dB to compensate receiving horn antenna gain
11.6dBi and RF cable loss 7.9dB. The vector signal generator amplitude was set so that the power level
measured at the spectrum analyzer was (-62dBm) + (0) [dBi]+ 1 dB= -61 dBm. Capture the spectrum
analyzer plots on short pulse radar waveform.
3.1.2 Radiated Calibration Setup
3.1.3 Calibration Deviation
There is no deviation with the original standard.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456
FAX : 886-3-328-4978
FCC ID : PY7-84773W
Page Number
: 12 of 20
Report Issued Date : Feb. 06, 2017
Report Version
: Rev. 01
Report Template No.: BU5-FZ15EDFS Version 1.0
FCC DFS Test Report
Report No. : FZ692208-01
3.1.4 Radar Waveform Calibration Result
<40MHz / 5510 MHz> Radar Type 0
Radar / DFS detection threshold level and the burst of pulses on the Channel frequency
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456
FAX : 886-3-328-4978
FCC ID : PY7-84773W
Page Number
: 13 of 20
Report Issued Date : Feb. 06, 2017
Report Version
: Rev. 01
Report Template No.: BU5-FZ15EDFS Version 1.0
FCC DFS Test Report
Report No. : FZ692208-01
3.2 In-Service Monitoring: Channel Move Time, Channel Closing
Transmission Time and Non-Occupancy Period
3.2.1 Limit of In-Service Monitoring
The EUT has In-Service Monitoring function to continuously monitor the radar signals, If radar is
detected, it must leave the channel (Shutdown). The Channel Move Time to cease all transmissions on the
current Channel upon detection of a Radar Waveform above the DFS Detection Threshold within 10 sec. The
total duration of Channel Closing Transmission Time is comprised of 200 milliseconds starting at the
beginning of the Channel Move Time plus any additional intermittent control signals required to facilitate
Channel changes (an aggregate of 60 milliseconds) during the remainder of the 10 second period. The
aggregate duration of control signals will not count quiet periods in between transmissions.
Non-Occupancy Period time is 30 minute during which a Channel will not be utilized after a Radar
Waveform is detected on that Channel. The non-associated Client Beacon Test is during the 30 minutes
observation time. The EUT should not make any transmissions in the DFS band after EUT power up.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456
FAX : 886-3-328-4978
FCC ID : PY7-84773W
Page Number
: 14 of 20
Report Issued Date : Feb. 06, 2017
Report Version
: Rev. 01
Report Template No.: BU5-FZ15EDFS Version 1.0
FCC DFS Test Report
Report No. : FZ692208-01
3.2.2 Test Procedures
1.
The radar pulse generator is setup to provide a pulse at frequency that the Master and Client are
operating. A type 0 radar pulse with a 1us pulse width and a 1428 us PRI is used for the testing.
2.
The vector signal generator is adjusted to provide the radar burst (18 pulses) at a level of
approximately -62dBm at the antenna of the Master device.
3.
A trigger is provided from the pulse generator to the DFS monitoring system in order to capture
the traffic and the occurrence of the radar pulse.
4.
A U-NII device operating as a Client Device will associate with the Master at Channel. The
MPEG file “TestFile.mpg” specified by the FCC is streamed from the “file computer” through the
Master to the Client Device and played in full motion video using Media Player Classic Ver.
6.4.8.6 in order to properly load the network for the entire period of the test.
5.
When a radar Burst with a level equal to the DFS Detection Threshold + 1dB is generated on the
Operating Channel of the U-NII device. At time T0 the Radar Waveform generator sends a Burst
of pulse of the radar waveform at Detection Threshold + 1dB.
6.
Observe the transmissions of the EUT at the end of the radar Burst on the Operating Channel.
Measure and record the transmissions from the EUT during the observation time (Channel Move
Time). One 12 seconds plot is reported for the Short Pulse Radar Types 0. The plot for the Short
Pulse Radar Types start at the end of the radar burst. The Channel Move Time will be calculated
based on the zoom in 600ms plot of the Short Pulse Radar Type.
7.
Measurement of the aggregate duration of the Channel Closing Transmission Time method.
With the spectrum analyzer set to zero span tuned to the center frequency of the EUT operating
channel at the radar simulated frequency, peak detection, and max hold, the dwell time per bin is
given by: Dwell (0.4ms)= S (12000ms) / B (30000); where Dwell is the dwell time per spectrum
analyzer sampling bin, S is the sweep time and B is the number of spectrum analyzer sampling
bins. An upper bound of the aggregate duration of the intermittent control signals of Channel
Closing Transmission Time is calculated by: C (ms)= N X Dwell (0.4 ms); where C is the Closing
Time, N is the number of spectrum analyzer sampling bins (intermittent control signals) showing
a U-NII transmission and Dwell is the dwell time per bin.
8.
Measure the EUT for more than 30 minutes following the channel move time to verify that no
transmissions or beacons occur on this Channel.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456
FAX : 886-3-328-4978
FCC ID : PY7-84773W
Page Number
: 15 of 20
Report Issued Date : Feb. 06, 2017
Report Version
: Rev. 01
Report Template No.: BU5-FZ15EDFS Version 1.0
FCC DFS Test Report
Report No. : FZ692208-01
3.2.3 Test Setup
Radiated Test Setup Photo
3.2.4 Test Deviation
There is no deviation with the original standard.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456
FAX : 886-3-328-4978
FCC ID : PY7-84773W
Page Number
: 16 of 20
Report Issued Date : Feb. 06, 2017
Report Version
: Rev. 01
Report Template No.: BU5-FZ15EDFS Version 1.0
FCC DFS Test Report
Report No. : FZ692208-01
3.2.5 Result of Channel Move Time, Channel Closing Transmission Time and
Non-Occupancy Period for Client Beacon Test
Test Mode :
Client without radar detection
Test Engineer : Bill Kuo
BW / Channel
Temperature :
27.3℃
Relative Humidity : 47%
Test Item
Test Result
Limit
Pass/Fail
Channel Move Time
0.6273 s
< 10s
Pass
< 260ms
Pass
≥ 30 min
Pass
40MHz / 5510 MHz Channel Closing Transmission Time
200ms +
4.4 ms
Non-Occupancy Period
≥ 30
Note: The Channel Closing Transmission Time is comprised of 200 milliseconds starting at the beginning of
the Channel Move Time plus any additional intermittent control signals required to facilitate a Channel move
(an aggregate of 60 milliseconds) during the remainder of the 10 seconds period. The aggregate duration of
control signals will not count quiet periods in between transmissions.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456
FAX : 886-3-328-4978
FCC ID : PY7-84773W
Page Number
: 17 of 20
Report Issued Date : Feb. 06, 2017
Report Version
: Rev. 01
Report Template No.: BU5-FZ15EDFS Version 1.0
FCC DFS Test Report
Report No. : FZ692208-01
3.2.6 Channel Move Time, Channel Closing Transmission Time and Non-Occupancy
Period for Client Beacon Test Plots
<40MHz / 5510 MHz> In-Service Monitoring
Channel Move Time &
Channel Closing Transmission Time
Non-Occupancy Period
Non-associated test
Master was off. (beacon test)
Note:
Dwell (0.4 ms)= Sweep Time (12000 ms) / Sweep Point Bins (30000)
Channel Closing Transmission Time (200 + 4.4 ms) = 200 + Number (11) X Dwell (0.4 ms) < 260ms
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456
FAX : 886-3-328-4978
FCC ID : PY7-84773W
Page Number
: 18 of 20
Report Issued Date : Feb. 06, 2017
Report Version
: Rev. 01
Report Template No.: BU5-FZ15EDFS Version 1.0
FCC DFS Test Report
Report No. : FZ692208-01
3.2.7 Data Traffic and Noise Floor Plots
EUT data traffic (Client)
Access Point data traffic (Master)
Noise Floor (No transmission)
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456
FAX : 886-3-328-4978
FCC ID : PY7-84773W
Page Number
: 19 of 20
Report Issued Date : Feb. 06, 2017
Report Version
: Rev. 01
Report Template No.: BU5-FZ15EDFS Version 1.0
FCC DFS Test Report
Report No. : FZ692208-01
4 List of Measuring Equipment
Instrument
Manufacturer
Model No.
Serial No.
Characteristics
Calibration
Date
Signal
Generator
Rohde &
Schwarz
SMJ100A
101375
9kHz~6GHz
Feb. 05, 2016
Oct. 15, 2016 Feb. 04, 2017
DFS
(DFS02-HY)
Horn Antenna
EMCO
AH-118
071025
1GHz ~ 18GHz
Jul. 29, 2016
Oct. 15, 2016
Jul. 28, 2017
DFS
(DFS02-HY)
Horn Antenna
EMCO
AHA-118
701023
1GHz ~ 18GHz
Jan. 07, 2016
Oct. 15, 2016 Jan. 06, 2017
DFS
(DFS02-HY)
Spectrum
Analyzer
Keysight
N9010A
MY56070412
10Hz~7GHz
Aug. 05, 2016
Oct. 15, 2016 Aug. 04, 2017
DFS
(DFS02-HY)
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456
FAX : 886-3-328-4978
FCC ID : PY7-84773W
Test Date
Due Date
Remark
Page Number
: 20 of 20
Report Issued Date : Feb. 06, 2017
Report Version
: Rev. 01
Report Template No.: BU5-FZ15EDFS Version 1.0
Download: 84773W GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n and NFC Test Report _20170207_v1 - PY7-84773W_TestRpt_DFS Sony Mobile Communications Inc
Mirror Download [FCC.gov]84773W GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n and NFC Test Report _20170207_v1 - PY7-84773W_TestRpt_DFS Sony Mobile Communications Inc
Document ID3286202
Application IDBK4oLBtqSiR4WDNt9oZk+g==
Document DescriptionTest Report_20170207_v1 - PY7-84773W_TestRpt_DFS
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize66.45kB (830626 bits)
Date Submitted2017-02-16 00:00:00
Date Available2017-02-16 00:00:00
Creation Date2017-12-22 15:56:08
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-12-22 15:56:08
Document TitleTest Report_20170207_v1 - PY7-84773W_TestRpt_DFS
Document CreatorMicrosoft® Word 2010

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:44e30162-a0f7-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:14 21:23:46Z
Create Date                     : 2017:07:14 21:23:46Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:44e30162-a0f7-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled
EXIF Metadata provided by EXIF.tools

Facebook Twitter Google+ RSS © FCCID.io 2018