FCC ID PZWDWWB001
BHT-1300 Main Board (Bluetooth and Wireless LAN Module)
by Denso Wave Incorporated
Grantee Code: PZW Product Code: DWWB001
Latest application date: 2013-09-03
FCC ID Device Details
| FCC ID | PZWDWWB001 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | PZW |
| Product Code | DWWB001 |
| Applicant Business | Denso Wave Incorporated 🇯🇵 |
| Related Domains |  denso-wave.co.jp |
| Equipment Class | BHT-1300 Main Board (Bluetooth and Wireless LAN Module) |
| Test Firm | Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2013-09-03 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2013-09-03 |
| 2412-2462 MHz | Original Equipment | 2013-08-16 |
| 2402-2480 MHz | Original Equipment | 2013-08-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2014-03-02 | PDF 1.6 MB |
| user manual rev | Users Manual | 2014-02-12 | PDF 2.2 MB |
| user mnaual rev | Users Manual | 2014-02-12 | PDF 2.2 MB |
| Internal Photos | Internal Photos | 2014-03-02 | PDF 3.2 MB |
| Internal Photos.pdf | Internal Photos | 2014-02-12 | PDF 581.4 KB |
| External Photos | External Photos | 2014-03-02 | PDF 533.9 KB |
| External Photos.pdf | External Photos | 2014-02-12 | PDF 581.4 KB |
| Label | ID Label/Location Info | 2013-09-03 | PDF 42.5 KB |
| Label Location | ID Label/Location Info | 2013-09-03 | PDF 12.1 KB |
| Label Location Declaration | Attestation Statements | 2013-09-03 | PDF 307.9 KB |
| Label Location.pdf | ID Label/Location Info | 2013-08-16 | PDF 109.8 KB |
| Label rev | ID Label/Location Info | 2013-08-16 | PDF 186.8 KB |
| Cover Letter (Modular Approval Request).pdf | Cover Letter(s) | 2013-08-16 | PDF 88 KB |
| Test Setup Photos (RF) | Test Setup Photos | 2014-03-02 | PDF 197.9 KB |
| Test Setup Photos (SAR) | Test Setup Photos | 2014-03-02 | PDF 430.7 KB |
| Test Setup Photos.pdf | Test Setup Photos | 2014-02-12 | PDF 191.4 KB |
| Test Report (DSS) | Test Report | 2013-09-03 | PDF 317.4 KB |
| Test Report (DTS) | Test Report | 2013-09-03 | PDF 308.4 KB |
| Test Report (BT).pdf | Test Report | 2013-08-16 | PDF 883.1 KB |
| Test Report (WLAN).pdf | Test Report | 2013-08-16 | PDF 895.3 KB |
| DoC | Attestation Statements | 2013-09-03 | PDF 16.7 KB |
| Attestation (5GHz Disabled).pdf | Attestation Statements | 2013-08-16 | PDF 23.2 KB |
| Attestation (Channel and Mode Declaration).pdf | Attestation Statements | 2013-08-16 | PDF 26.3 KB |
| Attestation (WLAN BT Collocation Declaration).pdf | Attestation Statements | 2013-08-16 | PDF 20.2 KB |
| Agent Authorization | Cover Letter(s) | 2013-09-03 | PDF 30.4 KB |
| Confidentiality Request (Shortterm) | Cover Letter(s) | 2013-09-03 | PDF 26.2 KB |
| Description of Change | Cover Letter(s) | 2013-09-03 | PDF 177.5 KB |
| Confidentiality Request.pdf | Cover Letter(s) | 2013-08-16 | PDF 35.8 KB |
| Cover Letter (Agent Authorization).pdf | Cover Letter(s) | 2013-08-16 | PDF 30.4 KB |
| Supersede request letter | Cover Letter(s) | 2013-08-16 | PDF 64.2 KB |
| supersede request letter | Cover Letter(s) | 2013-08-16 | PDF 21 KB |
| RF Exposure Info (SAR) | RF Exposure Info | 2013-09-03 | PDF 1.9 MB |
| RF Exposure Info (MPE).pdf | RF Exposure Info | 2013-08-16 | PDF 161.3 KB |
Application Information
| Application ID | uL6FieLHPGhS3PX29/Y5tg== |
|---|---|
| Final Action Date | 2013-09-03 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0005820196 |
| Model | DWWB001 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | BHT-1300 Main Board (Bluetooth and Wireless LAN Module) |
| Responsible Party | Takehiko Koshino, Proj. Mgr, AUTO-ID Business Unit Eng. Plan.Div., takehiko.koshino@denso-wave.co.jp , 81-569-49-5339 |
| Test Firm | Richard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com  , 886-3-3183232 |
| TCB Email | certification@curtis-straus.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/02/2014 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change as described in this filing. The highest reported SAR value for body-worn use condition is 0.07 W/kg. Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| uL6FieLHPGhS3PX29/Y5tg== | 2013-09-03 | Class II permissive change or modification of presently authorized equipment |
| 9tTCuFUJBPDsBvtS91YDiw== | 2013-09-03 | Class II permissive change or modification of presently authorized equipment |
| zTepAqr8fe+Ip8UKqBbhbQ== | 2013-08-16 | Original Equipment |
| irr/fz10Z/NsyUU5+X7vOw== | 2013-08-16 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application zTepAqr8fe+Ip8UKqBbhbQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 08/16/2013 Application Dated: 08/16/2013 |
| Denso Wave Incorporated |
| 1, Yoshiike, Kusagi |
| Agui-cho, Chita-gun, Aichi, 470-2297 Japan |
| Attention: Takehiko Koshino , Proj. Mgr, AUTO-ID Business Unit Eng. Plan.Div. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PZWDWWB001 |
| Name of Grantee: | Denso Wave Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | BHT-1300 Main Board (Bluetooth and Wireless LAN Module) |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.219 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application zTepAqr8fe+Ip8UKqBbhbQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Denso Wave Incorporated 1, Yoshiike, Kusagi Agui-cho, Chita-gun, Aichi, 470-2297 Japan |
Date of Grant: 08/16/2013 Application Dated: 08/16/2013 |
| Attention: Takehiko Koshino , Proj. Mgr, AUTO-ID Business Unit Eng. Plan.Div. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PZWDWWB001 |
| Name of Grantee: | Denso Wave Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | BHT-1300 Main Board (Bluetooth and Wireless LAN Module) |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.219 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 09/03/2013 Application Dated: 09/03/2013 |
| Denso Wave Incorporated |
| 1, Yoshiike, Kusagi |
| Agui-cho, Chita-gun, Aichi, 470-2297 Japan |
| Attention: Takehiko Koshino , Proj. Mgr, AUTO-ID Business Unit Eng. Plan.Div. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PZWDWWB001 |
| Name of Grantee: | Denso Wave Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | BHT-1300 Main Board (Bluetooth and Wireless LAN Module) |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.219 |
| Class II permissive change as described in this filing. The highest reported SAR value for body-worn use condition is 0.07 W/kg. Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application uL6FieLHPGhS3PX29/Y5tg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Denso Wave Incorporated 1, Yoshiike, Kusagi Agui-cho, Chita-gun, Aichi, 470-2297 Japan |
Date of Grant: 09/03/2013 Application Dated: 09/03/2013 |
| Attention: Takehiko Koshino , Proj. Mgr, AUTO-ID Business Unit Eng. Plan.Div. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PZWDWWB001 |
| Name of Grantee: | Denso Wave Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | BHT-1300 Main Board (Bluetooth and Wireless LAN Module) |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.219 |
| Class II permissive change as described in this filing. The highest reported SAR value for body-worn use condition is 0.07 W/kg. Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 08/16/2013 Application Dated: 08/16/2013 |
| Denso Wave Incorporated |
| 1, Yoshiike, Kusagi |
| Agui-cho, Chita-gun, Aichi, 470-2297 Japan |
| Attention: Takehiko Koshino , Proj. Mgr, AUTO-ID Business Unit Eng. Plan.Div. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PZWDWWB001 |
| Name of Grantee: | Denso Wave Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | BHT-1300 Main Board (Bluetooth and Wireless LAN Module) |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application irr/fz10Z/NsyUU5+X7vOw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Denso Wave Incorporated 1, Yoshiike, Kusagi Agui-cho, Chita-gun, Aichi, 470-2297 Japan |
Date of Grant: 08/16/2013 Application Dated: 08/16/2013 |
| Attention: Takehiko Koshino , Proj. Mgr, AUTO-ID Business Unit Eng. Plan.Div. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PZWDWWB001 |
| Name of Grantee: | Denso Wave Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | BHT-1300 Main Board (Bluetooth and Wireless LAN Module) |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 09/03/2013 Application Dated: 09/03/2013 |
| Denso Wave Incorporated |
| 1, Yoshiike, Kusagi |
| Agui-cho, Chita-gun, Aichi, 470-2297 Japan |
| Attention: Takehiko Koshino , Proj. Mgr, AUTO-ID Business Unit Eng. Plan.Div. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PZWDWWB001 |
| Name of Grantee: | Denso Wave Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | BHT-1300 Main Board (Bluetooth and Wireless LAN Module) |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 |
| Class II permissive change as described in this filing. Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 9tTCuFUJBPDsBvtS91YDiw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Denso Wave Incorporated 1, Yoshiike, Kusagi Agui-cho, Chita-gun, Aichi, 470-2297 Japan |
Date of Grant: 09/03/2013 Application Dated: 09/03/2013 |
| Attention: Takehiko Koshino , Proj. Mgr, AUTO-ID Business Unit Eng. Plan.Div. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PZWDWWB001 |
| Name of Grantee: | Denso Wave Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | BHT-1300 Main Board (Bluetooth and Wireless LAN Module) |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 |
| Class II permissive change as described in this filing. Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |