FCC ID Q2331307
Wireless Bluetooth Module
by Intel Mobile Communications GmbH
Grantee Code: Q23 Product Code: 31307
Latest application date: 2006-09-20
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2006-09-20 |
| 2402-2480 MHz | Original Equipment | 2004-05-04 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2004-05-04 | PDF 989.5 KB |
| Internal Photos | Internal Photos | 2004-05-04 | PDF 22.6 KB |
| antenna photo | External Photos | 2006-09-20 | PDF 68 KB |
| External Photos | External Photos | 2004-05-04 | PDF 43.2 KB |
| Label Info | ID Label/Location Info | 2004-05-04 | PDF 73.4 KB |
| Block Diagram | Block Diagram | 2004-05-04 | PDF 989.5 KB |
| Technical Description | Operational Description | 2004-05-04 | PDF 989.5 KB |
| setup photos | Test Setup Photos | 2006-09-20 | PDF 116.8 KB |
| Test Setup Photos | Test Setup Photos | 2004-05-04 | PDF 228.2 KB |
| report antenna info | Test Report | 2006-09-20 | PDF 138.5 KB |
| Annex to Test Report | Test Report | 2004-05-04 | PDF 234 KB |
| Test Report | Test Report | 2004-05-04 | PDF 1.8 MB |
| change letter permission | Cover Letter(s) | 2006-09-20 | PDF 36.7 KB |
| Applicant Letter | Cover Letter(s) | 2004-05-04 | PDF 365.1 KB |
| Modular Approval | Cover Letter(s) | 2004-05-04 | PDF 132.7 KB |
| Power of Attorney | Cover Letter(s) | 2004-05-04 | PDF 370.5 KB |
| Request for Confidentiality | Cover Letter(s) | 2004-05-04 | PDF 364.3 KB |
| SAR Calculation | RF Exposure Info | 2004-05-04 | PDF 117.4 KB |
| Schematics Metadata only | Schematics | PDF 48.2 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 51.7 KB |
Application Information
| Application ID | vpwwKUZ/ImfEBpUQ+BezGw== |
|---|---|
| Final Action Date | 2006-09-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008757197 |
| Model | 31307 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Wireless Bluetooth Module |
| Responsible Party | Steffen Buch, Program Manager Mobile Connectivity, steffen.buch@intel.com  , +49 89 998853 |
| Test Firm | Jim Owen, TUV America Inc., jowen@TUVam.com  , 8586781435 |
| TCB Email | jevans@tuvam.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change - antenna added. Power listed is conducted. This modular transmitter is approved for use in computers and peripherals, handheld devices and accessories, industrial and medical sensors, access points and home base stations, and may operate in conjunction with other mobile and portable transmitters; provided, the other mobile and portable transmitters have satisfied the appropriate RF exposure requirements contained in the FCC rules. The grantee also must provide OEM integrators, or end users if marketed directly to end users, with installation and operating instructions for satisfying RF exposure requirements. The Grantee must inform second manufacturers/installers that in order for this module to be operated in any configuration other than that permitted in the preceding sentences, a separate FCC equipment authorization must be obtained for each device into which this module is installed. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. If the Grantee does not provide an antenna with this module, it may not be sold to the end- user, but may be sold to a second manufacturer/installer. Instructions must be provided by the Grantee to the second manufacturer/installer that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used, and it complies with the requirements of Section 15.203 (i.e., has either a permanently attached antenna or utilizes a unique connector). Compliance of this module in its final configuration is the responsibility of the Grantee. If the second manufacturer/installer desires to use an antenna with this module that has not been previously approved for use with it, then the Grantee must file a Class II permissive change to approve the new antenna with the module. Alternatively, the second manufacturer/installer may obtain a separate FCC equipment authorization for the module and the new antenna. If the second manufacturer/installer markets a device that does not comply with the Grantee instructions for antenna configuration without having obtained a separate FCC equipment authorization for the module and new antenna configuration, that device will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| vpwwKUZ/ImfEBpUQ+BezGw== | 2006-09-20 | Class II permissive change or modification of presently authorized equipment |
| SO+ko7XYkbVnru1Asf6/2A== | 2004-05-04 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0033300 | 15C |
Grants
TCB Grant - Application vpwwKUZ/ImfEBpUQ+BezGw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV America, Inc. 10040 Mesa Rim Road San Diego, CA 92121 |
Date of Grant: 09/20/2006 Application Dated: 09/20/2006 |
| Intel Mobile Communications GmbH |
| Am Campeon 10-12 |
| Neubiberg, 85579 Germany |
| Attention: Steffen Buch , Program Manager Mobile Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q2331307 |
| Name of Grantee: | Intel Mobile Communications GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00333 |
| Class II Permissive Change - antenna added. Power listed is conducted. This modular transmitter is approved for use in computers and peripherals, handheld devices and accessories, industrial and medical sensors, access points and home base stations, and may operate in conjunction with other mobile and portable transmitters; provided, the other mobile and portable transmitters have satisfied the appropriate RF exposure requirements contained in the FCC rules. The grantee also must provide OEM integrators, or end users if marketed directly to end users, with installation and operating instructions for satisfying RF exposure requirements. The Grantee must inform second manufacturers/installers that in order for this module to be operated in any configuration other than that permitted in the preceding sentences, a separate FCC equipment authorization must be obtained for each device into which this module is installed. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. If the Grantee does not provide an antenna with this module, it may not be sold to the end- user, but may be sold to a second manufacturer/installer. Instructions must be provided by the Grantee to the second manufacturer/installer that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used, and it complies with the requirements of Section 15.203 (i.e., has either a permanently attached antenna or utilizes a unique connector). Compliance of this module in its final configuration is the responsibility of the Grantee. If the second manufacturer/installer desires to use an antenna with this module that has not been previously approved for use with it, then the Grantee must file a Class II permissive change to approve the new antenna with the module. Alternatively, the second manufacturer/installer may obtain a separate FCC equipment authorization for the module and the new antenna. If the second manufacturer/installer markets a device that does not comply with the Grantee instructions for antenna configuration without having obtained a separate FCC equipment authorization for the module and new antenna configuration, that device will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules. |
EAS Grant - Application vpwwKUZ/ImfEBpUQ+BezGw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications GmbH Am Campeon 10-12 Neubiberg, 85579 Germany |
Date of Grant: 09/20/2006 Application Dated: 09/20/2006 |
| Attention: Steffen Buch , Program Manager Mobile Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q2331307 |
| Name of Grantee: | Intel Mobile Communications GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00333 |
| Class II Permissive Change - antenna added. Power listed is conducted. This modular transmitter is approved for use in computers and peripherals, handheld devices and accessories, industrial and medical sensors, access points and home base stations, and may operate in conjunction with other mobile and portable transmitters; provided, the other mobile and portable transmitters have satisfied the appropriate RF exposure requirements contained in the FCC rules. The grantee also must provide OEM integrators, or end users if marketed directly to end users, with installation and operating instructions for satisfying RF exposure requirements. The Grantee must inform second manufacturers/installers that in order for this module to be operated in any configuration other than that permitted in the preceding sentences, a separate FCC equipment authorization must be obtained for each device into which this module is installed. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. If the Grantee does not provide an antenna with this module, it may not be sold to the end- user, but may be sold to a second manufacturer/installer. Instructions must be provided by the Grantee to the second manufacturer/installer that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used, and it complies with the requirements of Section 15.203 (i.e., has either a permanently attached antenna or utilizes a unique connector). Compliance of this module in its final configuration is the responsibility of the Grantee. If the second manufacturer/installer desires to use an antenna with this module that has not been previously approved for use with it, then the Grantee must file a Class II permissive change to approve the new antenna with the module. Alternatively, the second manufacturer/installer may obtain a separate FCC equipment authorization for the module and the new antenna. If the second manufacturer/installer markets a device that does not comply with the Grantee instructions for antenna configuration without having obtained a separate FCC equipment authorization for the module and new antenna configuration, that device will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 05/04/2004 Application Dated: 05/04/2004 |
| Intel Mobile Communications GmbH |
| Am Campeon 10-12 |
| Neubiberg, 85579 Germany |
| Attention: Steffen Buch , Program Manager Mobile Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q2331307 |
| Name of Grantee: | Intel Mobile Communications GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Bluetooth module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00333 |
| Power listed is conducted. This modular transmitter is approved for use in computers and peripherals, handheld devices and accessories, industrial and medical sensors, access points and home base stations, and may operate in conjunction with other mobile and portable transmitters; provided, the other mobile and portable transmitters have satisfied the appropriate RF exposure requirements contained in the FCC rules. The grantee also must provide OEM integrators, or end users if marketed directly to end users, with installation and operating instructions for satisfying RF exposure requirements. The Grantee must inform second manufacturers/installers that in order for this module to be operated in any configuration other than that permitted in the preceding sentences, a separate FCC equipment authorization must be obtained for each device into which this module is installed. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. If the Grantee does not provide an antenna with this module, it may not be sold to the end- user, but may be sold to a second manufacturer/installer. Instructions must be provided by the Grantee to the second manufacturer/installer that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used, and it complies with the requirements of Section 15.203 (i.e., has either a permanently attached antenna or utilizes a unique connector). Compliance of this module in its final configuration is the responsibility of the Grantee. If the second manufacturer/installer desires to use an antenna with this module that has not been previously approved for use with it, then the Grantee must file a Class II permissive change to approve the new antenna with the module. Alternatively, the second manufacturer/installer may obtain a separate FCC equipment authorization for the module and the new antenna. If the second manufacturer/installer markets a device that does not comply with the Grantee instructions for antenna configuration without having obtained a separate FCC equipment authorization for the module and new antenna configuration, that device will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules. |
EAS Grant - Application SO+ko7XYkbVnru1Asf6/2A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications GmbH Am Campeon 10-12 Neubiberg, 85579 Germany |
Date of Grant: 05/04/2004 Application Dated: 05/04/2004 |
| Attention: Steffen Buch , Program Manager Mobile Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q2331307 |
| Name of Grantee: | Intel Mobile Communications GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Bluetooth module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00333 |
| Power listed is conducted. This modular transmitter is approved for use in computers and peripherals, handheld devices and accessories, industrial and medical sensors, access points and home base stations, and may operate in conjunction with other mobile and portable transmitters; provided, the other mobile and portable transmitters have satisfied the appropriate RF exposure requirements contained in the FCC rules. The grantee also must provide OEM integrators, or end users if marketed directly to end users, with installation and operating instructions for satisfying RF exposure requirements. The Grantee must inform second manufacturers/installers that in order for this module to be operated in any configuration other than that permitted in the preceding sentences, a separate FCC equipment authorization must be obtained for each device into which this module is installed. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. If the Grantee does not provide an antenna with this module, it may not be sold to the end- user, but may be sold to a second manufacturer/installer. Instructions must be provided by the Grantee to the second manufacturer/installer that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used, and it complies with the requirements of Section 15.203 (i.e., has either a permanently attached antenna or utilizes a unique connector). Compliance of this module in its final configuration is the responsibility of the Grantee. If the second manufacturer/installer desires to use an antenna with this module that has not been previously approved for use with it, then the Grantee must file a Class II permissive change to approve the new antenna with the module. Alternatively, the second manufacturer/installer may obtain a separate FCC equipment authorization for the module and the new antenna. If the second manufacturer/installer markets a device that does not comply with the Grantee instructions for antenna configuration without having obtained a separate FCC equipment authorization for the module and new antenna configuration, that device will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules. |
| Mail To: |