FCC ID Q2331308
Bluetooth Module
by Intel Mobile Communications GmbH
Grantee Code: Q23 Product Code: 31308
Latest application date: 2010-05-07
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2010-05-07 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2009-12-29 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2007-03-04 |
| 2402-2480 MHz | Original Equipment | 2007-01-12 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| manual | Users Manual | 2007-01-12 | PDF 219.5 KB |
| Internal Photos | Internal Photos | 2010-05-07 | PDF 50.1 KB |
| Internal Photos | Internal Photos | 2009-12-29 | PDF 386.8 KB |
| Internal Photos | Internal Photos | 2007-03-04 | PDF 49.7 KB |
| internal photos | Internal Photos | 2007-01-12 | PDF 386.8 KB |
| External Photos | External Photos | 2010-05-07 | PDF 248.7 KB |
| External Photos | External Photos | 2009-12-29 | PDF 309.7 KB |
| Antenna Photos | External Photos | 2007-03-04 | PDF 266.6 KB |
| External Photos | External Photos | 2007-03-04 | PDF 31.3 KB |
| external photos | External Photos | 2007-01-12 | PDF 309.7 KB |
| FCC ID Label | ID Label/Location Info | 2010-05-07 | PDF 98.7 KB |
| FCC ID Label | ID Label/Location Info | 2007-03-04 | PDF 58 KB |
| label | ID Label/Location Info | 2007-01-12 | PDF 106.2 KB |
| label location | ID Label/Location Info | 2007-01-12 | PDF 176.3 KB |
| Test Photos | Test Setup Photos | 2010-06-27 | PDF 547.4 KB |
| Test Setup Photos | Test Setup Photos | 2010-05-07 | PDF 378.8 KB |
| Test Setup Photos | Test Setup Photos | 2007-03-04 | PDF 304.7 KB |
| test setup photos | Test Setup Photos | 2007-01-12 | PDF 2.8 MB |
| Test Report | Test Report | 2010-05-07 | PDF 264.3 KB |
| Test Report | Test Report | 2009-12-29 | PDF 993.6 KB |
| Test Report | Test Report | 2007-03-04 | PDF 276.3 KB |
| Report pt1 | Test Report | 2007-01-12 | PDF 1.3 MB |
| Report pt2 | Test Report | 2007-01-12 | PDF 3.8 MB |
| Class II Permissive Change Request | Cover Letter(s) | 2010-05-07 | PDF 139 KB |
| Authorization Letter | Cover Letter(s) | 2009-12-29 | PDF 342.5 KB |
| Class II Letter | Cover Letter(s) | 2009-12-29 | PDF 197.6 KB |
| Confidentiality Request Letters | Cover Letter(s) | 2009-12-29 | PDF 14.4 KB |
| Declaration Letter | Cover Letter(s) | 2009-12-29 | PDF 205.2 KB |
| Class II Permissive Change Request | Cover Letter(s) | 2007-03-04 | PDF 23.1 KB |
| Confidential Request Letter | Cover Letter(s) | 2007-03-04 | PDF 29.3 KB |
| Confidentiality Request | Cover Letter(s) | 2007-01-12 | PDF 549.5 KB |
| Modular Approval Letter | Cover Letter(s) | 2007-01-12 | PDF 19.6 KB |
| auth letter | Cover Letter(s) | 2007-01-12 | PDF 211.4 KB |
| letter | Cover Letter(s) | 2007-01-12 | PDF 264 KB |
| RF Exposure Info | RF Exposure Info | 2007-03-04 | PDF 26.4 KB |
| RF Exposure Info | RF Exposure Info | 2007-01-12 | PDF 212.4 KB |
Application Information
| Application ID | QcQK6R9pYWoLj8YbsJ9HzA== |
|---|---|
| Final Action Date | 2010-05-07 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008757197 |
| Model | 31308 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Bluetooth Module |
| Responsible Party | Steffen Buch, Program Manager Mobile Connectivity, steffen.buch@intel.com  , +49 89 998853 |
| Test Firm | John Chan, Bay Area Compliance Laboratory, bacl.regulatory@baclcorp.com  , 408-732-9162 |
| TCB Email | bacl.regulatory@baclcorp.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add new antenna types. Modular Approval. Power Output is Conducted. Approval is limited to OEM installation only. The only antenna approved for use with this module is documented in the filing, and must be installed in the manner specified therein. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| QcQK6R9pYWoLj8YbsJ9HzA== | 2010-05-07 | Class II permissive change or modification of presently authorized equipment |
| ZB2lwDo0aVlwWnn5/wnkUw== | 2009-12-29 | Class II permissive change or modification of presently authorized equipment |
| fzj6Xyq6GjxI152yH7j+xA== | 2007-03-04 | Class II permissive change or modification of presently authorized equipment |
| XiQqWX5CiVal7P9YDDMr4w== | 2007-01-12 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0012200 | 15C |
Grants
TCB Grant - Application ZB2lwDo0aVlwWnn5/wnkUw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MET Laboratories, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 12/29/2009 Application Dated: 12/29/2009 |
| Intel Mobile Communications GmbH |
| Am Campeon 10-12 |
| Neubiberg, 85579 Germany |
| Attention: Steffen Buch , Program Manager Mobile Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q2331308 |
| Name of Grantee: | Intel Mobile Communications GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth EDR Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00122 |
| Class II Permissive Change to add new antenna types. Modular Approval. Power Output is Conducted. Approval is limited to OEM installation only. The only antenna approved for use with this module is documented in the filing, and must be installed in the manner specified therein. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application ZB2lwDo0aVlwWnn5/wnkUw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications GmbH Am Campeon 10-12 Neubiberg, 85579 Germany |
Date of Grant: 12/29/2009 Application Dated: 12/29/2009 |
| Attention: Steffen Buch , Program Manager Mobile Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q2331308 |
| Name of Grantee: | Intel Mobile Communications GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth EDR Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00122 |
| Class II Permissive Change to add new antenna types. Modular Approval. Power Output is Conducted. Approval is limited to OEM installation only. The only antenna approved for use with this module is documented in the filing, and must be installed in the manner specified therein. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| MET Laboratories, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230-3432 | Date of Grant: 01/12/2007 Application Dated: 01/12/2007 |
| Intel Mobile Communications GmbH |
| Am Campeon 10-12 |
| Neubiberg, 85579 Germany |
| Attention: Steffen Buch , Program Manager Mobile Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q2331308 |
| Name of Grantee: | Intel Mobile Communications GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth EDR module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00122 |
| Modular Approval. Power Output is Conducted. Approval is limited to OEM installation only. The only antenna approved for use with this module is documented in the filing, and must be installed in the manner specified therein. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application XiQqWX5CiVal7P9YDDMr4w==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Intel Mobile Communications GmbH Am Campeon 10-12 Neubiberg, 85579 Germany | Date of Grant: 01/12/2007 Application Dated: 01/12/2007 |
| Attention: Steffen Buch , Program Manager Mobile Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q2331308 |
| Name of Grantee: | Intel Mobile Communications GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth EDR module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00122 |
| Modular Approval. Power Output is Conducted. Approval is limited to OEM installation only. The only antenna approved for use with this module is documented in the filing, and must be installed in the manner specified therein. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
|
| Mail To: |
| EA980785 |
TCB Grant - Application QcQK6R9pYWoLj8YbsJ9HzA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 05/07/2010 Application Dated: 05/07/2010 |
| Intel Mobile Communications GmbH |
| Am Campeon 10-12 |
| Neubiberg, 85579 Germany |
| Attention: Steffen Buch , Program Manager Mobile Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q2331308 |
| Name of Grantee: | Intel Mobile Communications GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00122 |
| Class II Permissive Change to add new antenna types. Modular Approval. Power Output is Conducted. Approval is limited to OEM installation only. The only antenna approved for use with this module is documented in the filing, and must be installed in the manner specified therein. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application QcQK6R9pYWoLj8YbsJ9HzA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications GmbH Am Campeon 10-12 Neubiberg, 85579 Germany |
Date of Grant: 05/07/2010 Application Dated: 05/07/2010 |
| Attention: Steffen Buch , Program Manager Mobile Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q2331308 |
| Name of Grantee: | Intel Mobile Communications GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00122 |
| Class II Permissive Change to add new antenna types. Modular Approval. Power Output is Conducted. Approval is limited to OEM installation only. The only antenna approved for use with this module is documented in the filing, and must be installed in the manner specified therein. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 | Date of Grant: 03/04/2007 Application Dated: 03/03/2007 |
| Intel Mobile Communications GmbH |
| Am Campeon 10-12 |
| Neubiberg, 85579 Germany |
| Attention: Steffen Buch , Program Manager Mobile Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q2331308 |
| Name of Grantee: | Intel Mobile Communications GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth EDR Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00122 |
| Modular Approval. Power Output is Conducted. Approval is limited to OEM installation only. The only antenna approved for use with this module is documented in the filing, and must be installed in the manner specified therein. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application fzj6Xyq6GjxI152yH7j+xA==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Intel Mobile Communications GmbH Am Campeon 10-12 Neubiberg, 85579 Germany | Date of Grant: 03/04/2007 Application Dated: 03/03/2007 |
| Attention: Steffen Buch , Program Manager Mobile Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q2331308 |
| Name of Grantee: | Intel Mobile Communications GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth EDR Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00122 |
| Modular Approval. Power Output is Conducted. Approval is limited to OEM installation only. The only antenna approved for use with this module is documented in the filing, and must be installed in the manner specified therein. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
|
| Mail To: |
| EA863306 |