1. FCC ID
  2. Q2G
  3. Q2GEM7355

FCC ID Q2GEM7355

WIRELESS MODULE

by Xplore Technologies Corp.

Grantee Code: Q2G   Product Code: EM7355
Latest application date: 2014-06-12

FCC ID Device Details

FCC IDQ2GEM7355
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQ2G
Product CodeEM7355
Applicant BusinessXplore Technologies Corp. 🇺🇸
Related Domains xploretech.com
Equipment ClassWIRELESS MODULE
Test FirmSPORTON INTERNATIONAL INC.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
704-716 MHzClass II permissive change or modification of presently authorized equipment2014-06-12
704-716 MHzClass II permissive change or modification of presently authorized equipment2014-01-29
704-716 MHzChange in identification of presently authorized equipment. Original FCC ID: N7NEM7355 Grant Date: 12/18/20122013-12-10

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2014-12-09PDF 718.1 KB
User ManualUsers Manual2014-07-28PDF 2.8 MB
Internal PhotosInternal Photos2014-07-28PDF 966.1 KB
External PhotosExternal Photos2014-12-09PDF 235.1 KB
External PhotosExternal Photos2014-07-28PDF 1.2 MB
EXTERNAL PHOTOS BACKExternal Photos2013-12-10PDF 350.5 KB
EXTERNAL PHOTOS FRONTExternal Photos2013-12-10PDF 67.3 KB
Label & Location InfoID Label/Location Info2014-06-12PDF 22.3 KB
Label LocationID Label/Location Info2014-01-29PDF 118.2 KB
Label Sample 1ID Label/Location Info2014-01-29PDF 37.6 KB
Label Sample 2ID Label/Location Info2014-01-29PDF 48.5 KB
LABEL INFOID Label/Location Info2013-12-10PDF 39.1 KB
Test Setup PhotosTest Setup Photos2014-12-09PDF 447.2 KB
Test Setup Photos PCBTest Setup Photos2014-07-28PDF 307.9 KB
Test Setup Photos PCB CDMATest Setup Photos2014-07-28PDF 294.4 KB
Test Setup Photos PCB LTETest Setup Photos2014-07-28PDF 434 KB
Test Setup Photos PCB part 90Test Setup Photos2014-07-28PDF 149.1 KB
Test Setup Photos RF ExpTest Setup Photos2014-07-28PDF 225.3 KB
Test ReportTest Report2014-01-29PDF 4 MB
Test Report PCB CDMATest Report2014-01-29PDF 1.5 MB
Test Report PCB LTE 1Test Report2014-01-29PDF 4.4 MB
Test Report PCB LTE 2Test Report2014-01-29PDF 3.8 MB
Test Report PCB part 90Test Report2014-01-29PDF 780.1 KB
DoC Attestation LetterCover Letter(s)2014-06-12PDF 157.6 KB
C2PC Request LetterCover Letter(s)2014-06-12PDF 248 KB
Confidentiality Request LetterCover Letter(s)2014-06-12PDF 217.2 KB
POACover Letter(s)2014-06-12PDF 202 KB
Class II Change LetterCover Letter(s)2014-01-29PDF 126.3 KB
Confidential LetterCover Letter(s)2014-01-29PDF 222.4 KB
POACover Letter(s)2014-01-29PDF 129 KB
Short Term Confidential LetterCover Letter(s)2014-01-29PDF 218.1 KB
COVER LETTER NEW GRANTEECover Letter(s)2013-12-10PDF 142.4 KB
COVER LETTER ORIGINAL GRANTEECover Letter(s)2013-12-10PDF 38.1 KB
SAR ReportRF Exposure Info2014-06-12PDF 5.7 MB
RF ExposureRF Exposure Info2014-01-29PDF 2.5 MB
RF Exposure Appendix ARF Exposure Info2014-01-29PDF 585.7 KB
RF Exposure Appendix BRF Exposure Info2014-01-29PDF 4.2 MB
RF Exposure Appendix CRF Exposure Info2014-01-29PDF 2.7 MB
Operational Description Metadata onlyOperational DescriptionPDF 1 MB
P Sensor Default power Metadata onlyOperational DescriptionPDF 276.5 KB

Application Information

Application IDmvvgr759wB/nAjgUGahcyw==
Final Action Date2014-06-12
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0009692500
ModelEM7355
Frequency Range704-716 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionWIRELESS MODULE
Responsible PartyDavid J Ball, Senior Regulatory and Compliance Engineer, dball@xploretech.com , 512-485-1556
Test FirmAlex Chen, SPORTON INTERNATIONAL INC., alex@sporton.com.tw , 886-3-3273456
TCB Emailtcb@siemic.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date12/09/2014
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsCIIPC to add host tablet, model number: iX101B1, trade name: Xplore, with same antenna but lesser antenna gain. The highest reported SAR value is 1.20W/kg. Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use.

Applications

Application IDDatePurpose
mvvgr759wB/nAjgUGahcyw==2014-06-12Class II permissive change or modification of presently authorized equipment
Nh/MzJRjzqMjegWByAnLvQ==2014-01-29Class II permissive change or modification of presently authorized equipment
e86eku2Xe07yKgAwDnGeuQ==2013-12-10Change in identification of presently authorized equipment. Original FCC ID: N7NEM7355 Grant Date: 12/18/2012

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
704-716 MHz0.2062.5ppm4M48F9W27BC
704-716 MHz0.1962.5ppm9M08F9W27BC
777-787 MHz0.22.5ppm4M52F9W27BC
777-787 MHz0.1872.5ppm9M08F9W27BC
817-824 MHz0.2642.5ppm1M28F9W9BC
824-849 MHz0.1972.5ppm4M52F9W22HBC
824-849 MHz0.1952.5ppm9M04F9W22HBC
824-849 MHz0.2742.5ppm1M29F9W22HBC
824-849 MHz0.1972.5ppm4M18F9W22HBC
1710-1755 MHz0.22.5ppm4M20F9W27BC
1710-1755 MHz0.2182.5ppm4M48F9W27BC
1710-1755 MHz0.2172.5ppm9M04F9W27BC
1710-1755 MHz0.2182.5ppm13M4F9W27BC
1710-1755 MHz0.2142.5ppm17M9F9W27BC
1850-1910 MHz0.2222.5ppm4M52F9W24EBC
1850-1910 MHz0.2182.5ppm9M04F9W24EBC
1850-1910 MHz0.2192.5ppm13M5F9W24EBC
1850-1910 MHz0.2112.5ppm17M9F9W24EBC
1850-1915 MHz0.2232.5ppm4M50F9W24EBC
1850-1915 MHz0.2192.5ppm9M04F9W24EBC
1850-1915 MHz0.222.5ppm13M4F9W24EBC
1850-1915 MHz0.2182.5ppm17M9F9W24EBC
1850-1910 MHz0.912.5ppm244KGXW24EBC
1850-1910 MHz0.3812.5ppm240KG7W24EBC
1850-1910 MHz0.2732.5ppm1M28F9W24EBC
1850-1910 MHz0.2092.5ppm4M20F9W24EBC

Grants

TCB Grant - Application Nh/MzJRjzqMjegWByAnLvQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
 Date of Grant: 01/29/2014

Application Dated: 01/28/2014
Xplore Technologies
14000 Summit Road
Suite 900
Austin, TX 78728
 
Attention: David Ball , Senior Regulatory and Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q2GEM7355
Name of Grantee:  Xplore Technologies
Equipment Class: PCS Licensed Transmitter
Notes: WIRELESS MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 824.0  -  849.0 1.841 2.5  PM 249KGXW
BC 22H 824.0  -  849.0 0.551 2.5  PM 240KG7W
BC 24E 1850.0  -  1910.0 0.91 2.5  PM 244KGXW
BC 24E 1850.0  -  1910.0 0.381 2.5  PM 240KG7W
BC 90 817.0  -  824.0 0.264 2.5  PM 1M28F9W
BC 22H 824.0  -  849.0 0.274 2.5  PM 1M29F9W
BC 24E 1850.0  -  1910.0 0.273 2.5  PM 1M28F9W
BC 22H 824.0  -  849.0 0.197 2.5  PM 4M18F9W
BC 24E 1850.0  -  1910.0 0.209 2.5  PM 4M20F9W
BC 27 1710.0  -  1755.0 0.2 2.5  PM 4M20F9W
BC 24E 1850.0  -  1910.0 0.222 2.5  PM 4M52F9W
BC 24E 1850.0  -  1910.0 0.218 2.5  PM 9M04F9W
BC 24E 1850.0  -  1910.0 0.219 2.5  PM 13M5F9W
BC 24E 1850.0  -  1910.0 0.211 2.5  PM 17M9F9W
BC 22H 824.0  -  849.0 0.197 2.5  PM 4M52F9W
BC 22H 824.0  -  849.0 0.195 2.5  PM 9M04F9W
BC 24E 1850.0  -  1915.0 0.223 2.5  PM 4M50F9W
BC 24E 1850.0  -  1915.0 0.219 2.5  PM 9M04F9W
BC 24E 1850.0  -  1915.0 0.22 2.5  PM 13M4F9W
BC 24E 1850.0  -  1915.0 0.218 2.5  PM 17M9F9W
BC 27 1710.0  -  1755.0 0.218 2.5  PM 4M48F9W
BC 27 1710.0  -  1755.0 0.217 2.5  PM 9M04F9W
BC 27 1710.0  -  1755.0 0.218 2.5  PM 13M4F9W
BC 27 1710.0  -  1755.0 0.214 2.5  PM 17M9F9W
BC 27 704.0  -  716.0 0.206 2.5  PM 4M48F9W
BC 27 704.0  -  716.0 0.196 2.5  PM 9M08F9W
BC 27 777.0  -  787.0 0.2 2.5  PM 4M52F9W
BC 27 777.0  -  787.0 0.187 2.5  PM 9M08F9W

Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use. (Date of Grant: 12/10/2013)

Class II Permissive Change: This Class II Permissive Change is to integrate this module into Xplore Technologies Corp Rugged Tablet PC, Model: iX104C6. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.87 W/kg and 1.59 W/kg, respectively.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application Nh/MzJRjzqMjegWByAnLvQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Xplore Technologies
14000 Summit Road Suite 900
Austin, TX 78728
United States 		  Date of Grant: 01/29/2014

Application Dated: 01/28/2014
 
Attention: David Ball , Senior Regulatory and Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q2GEM7355
Name of Grantee:  Xplore Technologies
Equipment Class: PCS Licensed Transmitter
Notes: WIRELESS MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 824.0  -  849.0 1.841 2.5  PM 249KGXW
BC 22H 824.0  -  849.0 0.551 2.5  PM 240KG7W
BC 24E 1850.0  -  1910.0 0.91 2.5  PM 244KGXW
BC 24E 1850.0  -  1910.0 0.381 2.5  PM 240KG7W
BC 90 817.0  -  824.0 0.264 2.5  PM 1M28F9W
BC 22H 824.0  -  849.0 0.274 2.5  PM 1M29F9W
BC 24E 1850.0  -  1910.0 0.273 2.5  PM 1M28F9W
BC 22H 824.0  -  849.0 0.197 2.5  PM 4M18F9W
BC 24E 1850.0  -  1910.0 0.209 2.5  PM 4M20F9W
BC 27 1710.0  -  1755.0 0.2 2.5  PM 4M20F9W
BC 24E 1850.0  -  1910.0 0.222 2.5  PM 4M52F9W
BC 24E 1850.0  -  1910.0 0.218 2.5  PM 9M04F9W
BC 24E 1850.0  -  1910.0 0.219 2.5  PM 13M5F9W
BC 24E 1850.0  -  1910.0 0.211 2.5  PM 17M9F9W
BC 22H 824.0  -  849.0 0.197 2.5  PM 4M52F9W
BC 22H 824.0  -  849.0 0.195 2.5  PM 9M04F9W
BC 24E 1850.0  -  1915.0 0.223 2.5  PM 4M50F9W
BC 24E 1850.0  -  1915.0 0.219 2.5  PM 9M04F9W
BC 24E 1850.0  -  1915.0 0.22 2.5  PM 13M4F9W
BC 24E 1850.0  -  1915.0 0.218 2.5  PM 17M9F9W
BC 27 1710.0  -  1755.0 0.218 2.5  PM 4M48F9W
BC 27 1710.0  -  1755.0 0.217 2.5  PM 9M04F9W
BC 27 1710.0  -  1755.0 0.218 2.5  PM 13M4F9W
BC 27 1710.0  -  1755.0 0.214 2.5  PM 17M9F9W
BC 27 704.0  -  716.0 0.206 2.5  PM 4M48F9W
BC 27 704.0  -  716.0 0.196 2.5  PM 9M08F9W
BC 27 777.0  -  787.0 0.2 2.5  PM 4M52F9W
BC 27 777.0  -  787.0 0.187 2.5  PM 9M08F9W

Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use. (Date of Grant: 12/10/2013)

Class II Permissive Change: This Class II Permissive Change is to integrate this module into Xplore Technologies Corp Rugged Tablet PC, Model: iX104C6. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.87 W/kg and 1.59 W/kg, respectively.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application mvvgr759wB/nAjgUGahcyw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 06/12/2014

Application Dated: 06/05/2014
Xplore Technologies Corp.
8601 Ranch Rd. 2222
Building 2
Austin, TX 78730
 
Attention: David Ball , Senior Regulatory and Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q2GEM7355
Name of Grantee:  Xplore Technologies Corp.
Equipment Class: PCS Licensed Transmitter
Notes: WIRELESS MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 824.0  -  849.0 1.841 2.5  PM 249KGXW
BC 22H 824.0  -  849.0 0.551 2.5  PM 240KG7W
BC 24E 1850.0  -  1910.0 0.91 2.5  PM 244KGXW
BC 24E 1850.0  -  1910.0 0.381 2.5  PM 240KG7W
BC 90 817.0  -  824.0 0.264 2.5  PM 1M28F9W
BC 22H 824.0  -  849.0 0.274 2.5  PM 1M29F9W
BC 24E 1850.0  -  1910.0 0.273 2.5  PM 1M28F9W
BC 22H 824.0  -  849.0 0.197 2.5  PM 4M18F9W
BC 24E 1850.0  -  1910.0 0.209 2.5  PM 4M20F9W
BC 27 1710.0  -  1755.0 0.2 2.5  PM 4M20F9W
BC 24E 1850.0  -  1910.0 0.222 2.5  PM 4M52F9W
BC 24E 1850.0  -  1910.0 0.218 2.5  PM 9M04F9W
BC 24E 1850.0  -  1910.0 0.219 2.5  PM 13M5F9W
BC 24E 1850.0  -  1910.0 0.211 2.5  PM 17M9F9W
BC 22H 824.0  -  849.0 0.197 2.5  PM 4M52F9W
BC 22H 824.0  -  849.0 0.195 2.5  PM 9M04F9W
BC 24E 1850.0  -  1915.0 0.223 2.5  PM 4M50F9W
BC 24E 1850.0  -  1915.0 0.219 2.5  PM 9M04F9W
BC 24E 1850.0  -  1915.0 0.22 2.5  PM 13M4F9W
BC 24E 1850.0  -  1915.0 0.218 2.5  PM 17M9F9W
BC 27 1710.0  -  1755.0 0.218 2.5  PM 4M48F9W
BC 27 1710.0  -  1755.0 0.217 2.5  PM 9M04F9W
BC 27 1710.0  -  1755.0 0.218 2.5  PM 13M4F9W
BC 27 1710.0  -  1755.0 0.214 2.5  PM 17M9F9W
BC 27 704.0  -  716.0 0.206 2.5  PM 4M48F9W
BC 27 704.0  -  716.0 0.196 2.5  PM 9M08F9W
BC 27 777.0  -  787.0 0.2 2.5  PM 4M52F9W
BC 27 777.0  -  787.0 0.187 2.5  PM 9M08F9W

CIIPC to add host tablet, model number: iX101B1, trade name: Xplore, with same antenna but lesser antenna gain. The highest reported SAR value is 1.20W/kg.

Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application mvvgr759wB/nAjgUGahcyw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Xplore Technologies Corp.
8601 Ranch Rd. 2222 Building 2
Austin, TX 78730
United States 		  Date of Grant: 06/12/2014

Application Dated: 06/05/2014
 
Attention: David Ball , Senior Regulatory and Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q2GEM7355
Name of Grantee:  Xplore Technologies Corp.
Equipment Class: PCS Licensed Transmitter
Notes: WIRELESS MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 824.0  -  849.0 1.841 2.5  PM 249KGXW
BC 22H 824.0  -  849.0 0.551 2.5  PM 240KG7W
BC 24E 1850.0  -  1910.0 0.91 2.5  PM 244KGXW
BC 24E 1850.0  -  1910.0 0.381 2.5  PM 240KG7W
BC 90 817.0  -  824.0 0.264 2.5  PM 1M28F9W
BC 22H 824.0  -  849.0 0.274 2.5  PM 1M29F9W
BC 24E 1850.0  -  1910.0 0.273 2.5  PM 1M28F9W
BC 22H 824.0  -  849.0 0.197 2.5  PM 4M18F9W
BC 24E 1850.0  -  1910.0 0.209 2.5  PM 4M20F9W
BC 27 1710.0  -  1755.0 0.2 2.5  PM 4M20F9W
BC 24E 1850.0  -  1910.0 0.222 2.5  PM 4M52F9W
BC 24E 1850.0  -  1910.0 0.218 2.5  PM 9M04F9W
BC 24E 1850.0  -  1910.0 0.219 2.5  PM 13M5F9W
BC 24E 1850.0  -  1910.0 0.211 2.5  PM 17M9F9W
BC 22H 824.0  -  849.0 0.197 2.5  PM 4M52F9W
BC 22H 824.0  -  849.0 0.195 2.5  PM 9M04F9W
BC 24E 1850.0  -  1915.0 0.223 2.5  PM 4M50F9W
BC 24E 1850.0  -  1915.0 0.219 2.5  PM 9M04F9W
BC 24E 1850.0  -  1915.0 0.22 2.5  PM 13M4F9W
BC 24E 1850.0  -  1915.0 0.218 2.5  PM 17M9F9W
BC 27 1710.0  -  1755.0 0.218 2.5  PM 4M48F9W
BC 27 1710.0  -  1755.0 0.217 2.5  PM 9M04F9W
BC 27 1710.0  -  1755.0 0.218 2.5  PM 13M4F9W
BC 27 1710.0  -  1755.0 0.214 2.5  PM 17M9F9W
BC 27 704.0  -  716.0 0.206 2.5  PM 4M48F9W
BC 27 704.0  -  716.0 0.196 2.5  PM 9M08F9W
BC 27 777.0  -  787.0 0.2 2.5  PM 4M52F9W
BC 27 777.0  -  787.0 0.187 2.5  PM 9M08F9W

CIIPC to add host tablet, model number: iX101B1, trade name: Xplore, with same antenna but lesser antenna gain. The highest reported SAR value is 1.20W/kg.

Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application e86eku2Xe07yKgAwDnGeuQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
 Date of Grant: 12/10/2013

Application Dated: 12/09/2013
Xplore Technologies
14000 Summit Road
Suite 900
Austin, TX 78728
 
Attention: David Ball , Senior Regulatory and Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q2GEM7355
Name of Grantee:  Xplore Technologies
Equipment Class: PCS Licensed Transmitter
Notes: WIRELESS MODULE
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 824.0  -  849.0 1.841 2.5  PM 249KGXW
BC 22H 824.0  -  849.0 0.551 2.5  PM 240KG7W
BC 24E 1850.0  -  1910.0 0.91 2.5  PM 244KGXW
BC 24E 1850.0  -  1910.0 0.381 2.5  PM 240KG7W
BC 90 817.0  -  824.0 0.264 2.5  PM 1M28F9W
BC 22H 824.0  -  849.0 0.274 2.5  PM 1M29F9W
BC 24E 1850.0  -  1910.0 0.273 2.5  PM 1M28F9W
BC 22H 824.0  -  849.0 0.197 2.5  PM 4M18F9W
BC 24E 1850.0  -  1910.0 0.209 2.5  PM 4M20F9W
BC 27 1710.0  -  1755.0 0.2 2.5  PM 4M20F9W
BC 24E 1850.0  -  1910.0 0.222 2.5  PM 4M52F9W
BC 24E 1850.0  -  1910.0 0.218 2.5  PM 9M04F9W
BC 24E 1850.0  -  1910.0 0.219 2.5  PM 13M5F9W
BC 24E 1850.0  -  1910.0 0.211 2.5  PM 17M9F9W
BC 22H 824.0  -  849.0 0.197 2.5  PM 4M52F9W
BC 22H 824.0  -  849.0 0.195 2.5  PM 9M04F9W
BC 24E 1850.0  -  1915.0 0.223 2.5  PM 4M50F9W
BC 24E 1850.0  -  1915.0 0.219 2.5  PM 9M04F9W
BC 24E 1850.0  -  1915.0 0.22 2.5  PM 13M4F9W
BC 24E 1850.0  -  1915.0 0.218 2.5  PM 17M9F9W
BC 27 1710.0  -  1755.0 0.218 2.5  PM 4M48F9W
BC 27 1710.0  -  1755.0 0.217 2.5  PM 9M04F9W
BC 27 1710.0  -  1755.0 0.218 2.5  PM 13M4F9W
BC 27 1710.0  -  1755.0 0.214 2.5  PM 17M9F9W
BC 27 704.0  -  716.0 0.206 2.5  PM 4M48F9W
BC 27 704.0  -  716.0 0.196 2.5  PM 9M08F9W
BC 27 777.0  -  787.0 0.2 2.5  PM 4M52F9W
BC 27 777.0  -  787.0 0.187 2.5  PM 9M08F9W

Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application e86eku2Xe07yKgAwDnGeuQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Xplore Technologies
14000 Summit Road Suite 900
Austin, TX 78728
United States 		  Date of Grant: 12/10/2013

Application Dated: 12/09/2013
 
Attention: David Ball , Senior Regulatory and Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q2GEM7355
Name of Grantee:  Xplore Technologies
Equipment Class: PCS Licensed Transmitter
Notes: WIRELESS MODULE
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 824.0  -  849.0 1.841 2.5  PM 249KGXW
BC 22H 824.0  -  849.0 0.551 2.5  PM 240KG7W
BC 24E 1850.0  -  1910.0 0.91 2.5  PM 244KGXW
BC 24E 1850.0  -  1910.0 0.381 2.5  PM 240KG7W
BC 90 817.0  -  824.0 0.264 2.5  PM 1M28F9W
BC 22H 824.0  -  849.0 0.274 2.5  PM 1M29F9W
BC 24E 1850.0  -  1910.0 0.273 2.5  PM 1M28F9W
BC 22H 824.0  -  849.0 0.197 2.5  PM 4M18F9W
BC 24E 1850.0  -  1910.0 0.209 2.5  PM 4M20F9W
BC 27 1710.0  -  1755.0 0.2 2.5  PM 4M20F9W
BC 24E 1850.0  -  1910.0 0.222 2.5  PM 4M52F9W
BC 24E 1850.0  -  1910.0 0.218 2.5  PM 9M04F9W
BC 24E 1850.0  -  1910.0 0.219 2.5  PM 13M5F9W
BC 24E 1850.0  -  1910.0 0.211 2.5  PM 17M9F9W
BC 22H 824.0  -  849.0 0.197 2.5  PM 4M52F9W
BC 22H 824.0  -  849.0 0.195 2.5  PM 9M04F9W
BC 24E 1850.0  -  1915.0 0.223 2.5  PM 4M50F9W
BC 24E 1850.0  -  1915.0 0.219 2.5  PM 9M04F9W
BC 24E 1850.0  -  1915.0 0.22 2.5  PM 13M4F9W
BC 24E 1850.0  -  1915.0 0.218 2.5  PM 17M9F9W
BC 27 1710.0  -  1755.0 0.218 2.5  PM 4M48F9W
BC 27 1710.0  -  1755.0 0.217 2.5  PM 9M04F9W
BC 27 1710.0  -  1755.0 0.218 2.5  PM 13M4F9W
BC 27 1710.0  -  1755.0 0.214 2.5  PM 17M9F9W
BC 27 704.0  -  716.0 0.206 2.5  PM 4M48F9W
BC 27 704.0  -  716.0 0.196 2.5  PM 9M08F9W
BC 27 777.0  -  787.0 0.2 2.5  PM 4M52F9W
BC 27 777.0  -  787.0 0.187 2.5  PM 9M08F9W

Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To: