FCC ID Q2GMERCURY6EM
RFID Module
by Xplore Technologies Corp.
Grantee Code: Q2G Product Code: MERCURY6EM
Latest application date: 2019-06-27
FCC ID Device Details
| FCC ID | Q2GMERCURY6EM |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | Q2G |
| Product Code | MERCURY6EM |
| Applicant Business | Xplore Technologies Corp. 🇺🇸 |
| Related Domains |  xploretech.com |
| Equipment Class | RFID Module |
| Test Firm | BUREAU VERITAS CONSUMER PRODUCTS SERVICES, INC. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.75-927.25 MHz | Class II permissive change or modification of presently authorized equipment | 2019-06-27 |
| 902.75-927.25 MHz | Change in identification of presently authorized equipment. Original FCC ID: QV5MERCURY6E-M Grant Date: 11/30/2012 | 2017-10-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2019-06-27 | PDF 1.2 MB |
| Internal Photos | Internal Photos | 2019-06-27 | PDF 1.9 MB |
| Internal Photos | Internal Photos | 2017-10-13 | PDF 1.9 MB |
| External Photos | External Photos | 2019-06-27 | PDF 1.2 MB |
| External Photos | External Photos | 2017-10-13 | PDF 1.9 MB |
| Label and Label Location | ID Label/Location Info | 2019-06-27 | PDF 883.9 KB |
| Label and Label Location | ID Label/Location Info | 2017-10-13 | PDF 261.9 KB |
| Cover Letters | Cover Letter(s) | 2019-06-27 | PDF 322.5 KB |
| Cover Letters | Cover Letter(s) | 2017-10-13 | PDF 349.3 KB |
| RF Exposure info | RF Exposure Info | 2019-06-27 | PDF 2.4 MB |
| Operational Description Metadata only | Operational Description | PDF 150.6 KB |
Application Information
| Application ID | ZrM8Nlwu3EpP4OW/BUobJQ== |
|---|---|
| Final Action Date | 2019-06-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0009692500 |
| Model | MERCURY6EM |
| Frequency Range | 902.75-927.25 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | RFID Module |
| Responsible Party | David J Ball, Senior Regulatory and Compliance Engineer, dball@xploretech.com , 512-485-1556 |
| Test Firm | Dori Robertson, BUREAU VERITAS CONSUMER PRODUCTS SERVICES, INC., dolores.robertson@us.bureauveritas.com  , 978 486 8880 |
| TCB Email | Stuart.Beck@nemko.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Class II Permissive Change to integrate this module into host platform, model iX101L1 or iX101L2 from Xplore Technologies with antennas as described in this filing. The highest reported SAR for extremity exposure conditions are 1.26 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ZrM8Nlwu3EpP4OW/BUobJQ== | 2019-06-27 | Class II permissive change or modification of presently authorized equipment |
| JM927daJBM2uHzH1EJHk0A== | 2017-10-13 | Change in identification of presently authorized equipment. Original FCC ID: QV5MERCURY6E-M Grant Date: 11/30/2012 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.75-927.25 MHz | 1.0000000 | 15C |
Grants
TCB Grant - Application ZrM8Nlwu3EpP4OW/BUobJQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 06/27/2019 Application Dated: 06/27/2019 |
| Xplore Technologies Corp. |
| 8601 Ranch Rd. 2222 |
| Building 2 |
| Austin, TX 78730 |
| Attention: David Ball , Senior Regulatory and Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q2GMERCURY6EM |
| Name of Grantee: | Xplore Technologies Corp. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 1.0 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Class II Permissive Change to integrate this module into host platform, model iX101L1 or iX101L2 from Xplore Technologies with antennas as described in this filing. The highest reported SAR for extremity exposure conditions are 1.26 W/kg. |
EAS Grant - Application ZrM8Nlwu3EpP4OW/BUobJQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Xplore Technologies Corp. 8601 Ranch Rd. 2222 Building 2 Austin, TX 78730 United States |
Date of Grant: 06/27/2019 Application Dated: 06/27/2019 |
| Attention: David Ball , Senior Regulatory and Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q2GMERCURY6EM |
| Name of Grantee: | Xplore Technologies Corp. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 1.0 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Class II Permissive Change to integrate this module into host platform, model iX101L1 or iX101L2 from Xplore Technologies with antennas as described in this filing. The highest reported SAR for extremity exposure conditions are 1.26 W/kg. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 10/13/2017 Application Dated: 10/13/2017 |
| Xplore Technologies Corp. |
| 8601 Ranch Rd. 2222 |
| Building 2 |
| Austin, TX 78730 |
| Attention: David Ball , Senior Regulatory and Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q2GMERCURY6EM |
| Name of Grantee: | Xplore Technologies Corp. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 1.0 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
EAS Grant - Application JM927daJBM2uHzH1EJHk0A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Xplore Technologies Corp. 8601 Ranch Rd. 2222 Building 2 Austin, TX 78730 United States |
Date of Grant: 10/13/2017 Application Dated: 10/13/2017 |
| Attention: David Ball , Senior Regulatory and Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q2GMERCURY6EM |
| Name of Grantee: | Xplore Technologies Corp. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 1.0 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| Mail To: |