FCC ID Q3K-5XACMOD

5 GHz Wireless Module

by Radwin Ltd.

Grantee Code: Q3K   Product Code: 5XACMOD
Latest application date: 2015-12-16

Device Images

FCC ID Device Details

FCC IDQ3K-5XACMOD
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQ3K
Product Code5XACMOD
Applicant BusinessRadwin Ltd. 🇮🇱
Related Domains radwin.com
Equipment Class5 GHz Wireless Module
Test FirmMicom Labs

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5157.5-5245 MHzClass II permissive change or modification of presently authorized equipment2015-12-16
4942.5-4987.5 MHzClass II permissive change or modification of presently authorized equipment2015-12-16
5730-5845 MHzClass III permissive change to software defined radio2015-11-24
4942.5-4987.5 MHzClass III permissive change to software defined radio2015-10-29
5157.5-5245 MHzClass III permissive change to software defined radio2015-10-22
5157-5245 MHzOriginal Equipment2015-02-19
5730-5845 MHzOriginal Equipment2015-02-19

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2015-12-16PDF 315.5 KB
User ManualUsers Manual2015-11-24PDF 314.8 KB
ManualUsers Manual2015-10-29PDF 313.9 KB
ManualUsers Manual2015-10-22PDF 314 KB
Manual r1Users Manual2015-02-19PDF 378.1 KB
Internal PhotosInternal Photos2015-11-24PDF 421.7 KB
IntInternal Photos2015-02-19PDF 421.7 KB
PhotosExternal Photos2015-12-16PDF 421.7 KB
External PhotosExternal Photos2015-11-24PDF 421.7 KB
Device PhotosExternal Photos2015-10-22PDF 421.7 KB
ExtExternal Photos2015-02-19PDF 421.7 KB
Label Location/InfoID Label/Location Info2015-12-16PDF 421.7 KB
Label InfoID Label/Location Info2015-11-24PDF 225.2 KB
LabelID Label/Location Info2015-10-29PDF 225.2 KB
Elevation Angle ConsiderationOperational Description2015-02-19PDF 1.2 MB
Test Setup PhotosTest Setup Photos2015-12-16PDF 916.7 KB
Test ReportTest Setup Photos2015-11-24PDF 976.6 KB
SetupTest Setup Photos2015-10-29PDF 850.2 KB
SetupTest Setup Photos2015-10-22PDF 1 MB
Test ReportTest Report2015-12-16PDF 2.6 MB
Test Report - 1 UNII pt 1Test Report2015-12-16PDF 4.4 MB
Test Report - 1 UNII pt 2Test Report2015-12-16PDF 1.9 MB
Test Report - 2 UNII pt 1Test Report2015-12-16PDF 5.4 MB
Test Report - 2 UNII pt 2Test Report2015-12-16PDF 3.3 MB
Test Report - 3 UNIITest Report2015-12-16PDF 4.7 MB
Test Report - DFS pt 1Test Report2015-12-16PDF 2.6 MB
Test Report - DFS pt 2Test Report2015-12-16PDF 3.4 MB
Test ReportTest Report2015-11-24PDF 4.4 MB
DC V and ITest Report2015-10-29PDF 252.6 KB
TNB 4 9 GHzTest Report2015-10-29PDF 2.6 MB
DFS 1 Metadata onlyTest Report2015-10-22PDF 2.5 MB
DFS 2 Metadata onlyTest Report2015-10-22PDF 3.4 MB
DFS Rev B Part 1Test Report2015-10-22PDF 2.5 MB
DFS Rev B Part 2Test Report2015-10-22PDF 3.4 MB
NII 1Test Report2015-10-22PDF 5.3 MB
NII 2Test Report2015-10-22PDF 2.8 MB
NIITest Report2015-02-19PDF 4.8 MB
Part 1 Rev BTest Report2015-02-19PDF 4.4 MB
Part 2 Rev BTest Report2015-02-19PDF 3.9 MB
Configuration Control AttestationCover Letter(s)2015-10-22PDF 62.8 KB
AuthorizationCover Letter(s)2015-12-16PDF 42.7 KB
Authorization LetterCover Letter(s)2015-12-16PDF 42.7 KB
Confidentiality RequestCover Letter(s)2015-12-16PDF 49.5 KB
AuthorizationCover Letter(s)2015-11-24PDF 42.6 KB
Confidentiality RequestCover Letter(s)2015-11-24PDF 52.3 KB
SDR Class II PC DeclarationCover Letter(s)2015-11-24PDF 130 KB
SDR RequestCover Letter(s)2015-11-24PDF 37 KB
AuthorizationCover Letter(s)2015-10-29PDF 42.6 KB
ConfidCover Letter(s)2015-10-29PDF 49.7 KB
PCIII DeclarationCover Letter(s)2015-10-29PDF 129.1 KB
Purpose of this FilingCover Letter(s)2015-10-29PDF 37.1 KB
AuthorizationCover Letter(s)2015-10-22PDF 42.5 KB
Confid RequestCover Letter(s)2015-10-22PDF 49.6 KB
PCIII DeclarationCover Letter(s)2015-10-22PDF 129.1 KB
Software Configuration ControlCover Letter(s)2015-10-22PDF 67.2 KB
AuthorizationCover Letter(s)2015-02-19PDF 56.6 KB
ConfidCover Letter(s)2015-02-19PDF 51.2 KB
Confid RequestCover Letter(s)2015-02-19PDF 51.2 KB
Modular RequestCover Letter(s)2015-02-19PDF 304.2 KB
RF ExposureRF Exposure Info2015-12-16PDF 73.1 KB
RF Exposure - 1RF Exposure Info2015-12-16PDF 166.4 KB
RF Exposure - 2RF Exposure Info2015-12-16PDF 156 KB
RF Exposure - 3RF Exposure Info2015-12-16PDF 82.2 KB
RF ExposureRF Exposure Info2015-11-24PDF 165.6 KB
RFxRF Exposure Info2015-10-29PDF 75 KB
MPERF Exposure Info2015-02-19PDF 165.1 KB
RFx MPERF Exposure Info2015-02-19PDF 165.1 KB
Block Metadata onlyBlock DiagramPDF 268.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 268.4 KB
Block Diagram Module Metadata onlyBlock DiagramPDF 268.4 KB
Schema Metadata onlySchematicsPDF 194.4 KB
Schematics Metadata onlySchematicsPDF 194.4 KB
Antenna Data Sheet 1 Metadata onlyOperational DescriptionPDF 509.3 KB
Antenna Data Sheet 10 Metadata onlyOperational DescriptionPDF 593.7 KB
Antenna Data Sheet 11 Metadata onlyOperational DescriptionPDF 523.5 KB
Antenna Data Sheet 12 Metadata onlyOperational DescriptionPDF 529.9 KB
Antenna Data Sheet 13 Metadata onlyOperational DescriptionPDF 535 KB
Antenna Data Sheet 14 Metadata onlyOperational DescriptionPDF 608.9 KB
Antenna Data Sheet 2 Metadata onlyOperational DescriptionPDF 509.6 KB
Antenna Data Sheet 3 Metadata onlyOperational DescriptionPDF 399.8 KB
Antenna Data Sheet 4 Metadata onlyOperational DescriptionPDF 510.2 KB
Antenna Data Sheet 5 Metadata onlyOperational DescriptionPDF 522.3 KB
Antenna Data Sheet 6 Metadata onlyOperational DescriptionPDF 400.9 KB
Antenna Data Sheet 7 Metadata onlyOperational DescriptionPDF 523.5 KB
Antenna Data Sheet 8 Metadata onlyOperational DescriptionPDF 546.4 KB
Antenna Data Sheet 9 Metadata onlyOperational DescriptionPDF 688.7 KB
Channelization Metadata onlyOperational DescriptionPDF 54.3 KB
KDB Inquiry Report Metadata onlyOperational DescriptionPDF 92.7 KB
OET KnowledgeBase Inquiry Confirmation Tracking Number 830721 Metadata onlyOperational DescriptionPDF 625.4 KB
Operational Description Metadata onlyOperational DescriptionPDF 303.7 KB
Ops Metadata onlyOperational DescriptionPDF 302.5 KB
Ops Metadata onlyOperational DescriptionPDF 266 KB
SDR Security Description Metadata onlySDR Software/Security InfPDF 1.1 MB
SDR Security Description Metadata onlySDR Software/Security InfPDF 1.1 MB
UNII Device Security Metadata onlySDR Software/Security InfPDF 437.7 KB
UNII Security Description Metadata onlySDR Software/Security InfPDF 447.5 KB
UNII Security Description Metadata onlySDR Software/Security InfPDF 452 KB
UNII Software Security Control Metadata onlySDR Software/Security InfPDF 62.7 KB
Part List Metadata onlyParts List/Tune Up InfoPDF 14.5 KB
Parts Metadata onlyParts List/Tune Up InfoPDF 14.5 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 14.5 KB
Tune Up Metadata onlyParts List/Tune Up InfoPDF 318.8 KB

Application Information

Application IDgs+1kHD+VM9ETmR8jt9gUA==
Final Action Date2015-12-16
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0008787137
Model5XACMOD
Frequency Range5157.5-5245 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description5 GHz Wireless Module
Responsible PartyShlomo Weiss, Standardization Officer, shlomo@radwin.com , +97237662988
Technical ContactGordon Hurst, MiCOM Labs, gordon_hurst@micomlabs.com , (925)462-0304
Test FirmGordon Hurst, Micom Labs, gordon_hurst@micomlabs.com , 925-462-0304
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive change, adding 20.5 dBi Smart Antenna. Power Output listed is maximum combined Conducted power operating in a 2X2 MIMO configuration. The antennas used for this transmitter must be installed to provide a separation distance of at least 313 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is capable of 5, 10, 20, 40, and 80MHz bandwidths.

Applications

Application IDDatePurpose
gs+1kHD+VM9ETmR8jt9gUA==2015-12-16Class II permissive change or modification of presently authorized equipment
EQTBWdjLMavbiXYtY+7KzQ==2015-12-16Class II permissive change or modification of presently authorized equipment
2t7fp63kgyOxYmXT4Uap4w==2015-11-24Class III permissive change to software defined radio
4DcHXpX5FusoPTnYnmqQCQ==2015-10-29Class III permissive change to software defined radio
0jvdTi3p8cNf2AebV2314A==2015-10-22Class III permissive change to software defined radio
6dDQO1NiV7oZtdMnmz1+Lw==2015-02-19Original Equipment
0MV7RwPdB/WJ8Uk9VJBZcA==2015-02-19Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
4942.5-4987.5 MHz0.4980.144ppm5M00W7W90YMO
4945-4985 MHz0.5510.144ppm10M0W7W90YMO
4950-4980 MHz0.6670.144ppm20M0W7W90YMO
5157-5245 MHz0.871000015E38, CC
5157.5-5245 MHz0.87115E38, CC
5157.5-5245 MHz0.87115E38, MO
5253.5-5346.5 MHz0.07715E38, CC
5253.5-5346.5 MHz0.07715E38, MO
5478.5-5721.5 MHz0.07915E38, CC
5478.5-5721.5 MHz0.07915E38, MO
5730-5845 MHz0.925000015CCC
5730-5845 MHz0.980000015E38, MO
5730-5845 MHz0.9815E38, MO

Grants

TCB Grant - Application gs+1kHD+VM9ETmR8jt9gUA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 12/16/2015

Application Dated: 12/16/2015
Radwin Ltd.
27 Habarzel street
Tel Aviv, 6971039
Israel
 
Attention: Shlomo Weiss , Standardization Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q3K-5XACMOD
Name of Grantee:  Radwin Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 5 GHz Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 MO 15E 5730.0  -  5845.0 0.98  
38 MO 15E 5157.5  -  5245.0 0.871  
38 MO 15E 5253.5  -  5346.5 0.077  
38 MO 15E 5478.5  -  5721.5 0.079  

Class II Permissive change, adding 20.5 dBi Smart Antenna. Power Output listed is maximum combined Conducted power operating in a 2X2 MIMO configuration. The antennas used for this transmitter must be installed to provide a separation distance of at least 313 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device is capable of 5, 10, 20, 40, and 80MHz bandwidths.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application gs+1kHD+VM9ETmR8jt9gUA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Radwin Ltd.
27 Habarzel street
Tel Aviv, 6971039
Israel
  Date of Grant: 12/16/2015

Application Dated: 12/16/2015
 
Attention: Shlomo Weiss , Standardization Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q3K-5XACMOD
Name of Grantee:  Radwin Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 5 GHz Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 MO 15E 5730.0  -  5845.0 0.98  
38 MO 15E 5157.5  -  5245.0 0.871  
38 MO 15E 5253.5  -  5346.5 0.077  
38 MO 15E 5478.5  -  5721.5 0.079  

Class II Permissive change, adding 20.5 dBi Smart Antenna. Power Output listed is maximum combined Conducted power operating in a 2X2 MIMO configuration. The antennas used for this transmitter must be installed to provide a separation distance of at least 313 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device is capable of 5, 10, 20, 40, and 80MHz bandwidths.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application EQTBWdjLMavbiXYtY+7KzQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 12/16/2015

Application Dated: 12/16/2015
Radwin Ltd.
27 Habarzel street
Tel Aviv, 6971039
Israel
 
Attention: Shlomo Weiss , Standardization Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q3K-5XACMOD
Name of Grantee:  Radwin Ltd.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 5 GHz Wireless Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 90Y 4942.5  -  4987.5 0.498 0.144  PM 5M00W7W
MO 90Y 4945.0  -  4985.0 0.551 0.144  PM 10M0W7W
MO 90Y 4950.0  -  4980.0 0.667 0.144  PM 20M0W7W

Class II Permissive change, adding 20.5 dBi Smart Antenna. Power Output listed is maximum combined Conducted power operating in a 2X2 MIMO configuration. The antennas used for this transmitter must be installed to provide a separation distance of at least 80.2 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device is capable of 5, 10, and 20 MHz bandwidths.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application EQTBWdjLMavbiXYtY+7KzQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Radwin Ltd.
27 Habarzel street
Tel Aviv, 6971039
Israel
  Date of Grant: 12/16/2015

Application Dated: 12/16/2015
 
Attention: Shlomo Weiss , Standardization Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q3K-5XACMOD
Name of Grantee:  Radwin Ltd.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 5 GHz Wireless Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 90Y 4942.5  -  4987.5 0.498 0.144  PM 5M00W7W
MO 90Y 4945.0  -  4985.0 0.551 0.144  PM 10M0W7W
MO 90Y 4950.0  -  4980.0 0.667 0.144  PM 20M0W7W

Class II Permissive change, adding 20.5 dBi Smart Antenna. Power Output listed is maximum combined Conducted power operating in a 2X2 MIMO configuration. The antennas used for this transmitter must be installed to provide a separation distance of at least 80.2 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device is capable of 5, 10, and 20 MHz bandwidths.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 6dDQO1NiV7oZtdMnmz1+Lw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 02/19/2015

Application Dated: 02/06/2015
Radwin Ltd.
27 Habarzel street
Tel Aviv, 6971039
Israel
 
Attention: Roni Barshan , RF Dept. Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q3K-5XACMOD
Name of Grantee:  Radwin Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 5GHz Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5157.0  -  5245.0 0.871  

Power Output listed is maximum combined Conducted power operating in a 2X2 MIMO configuration. The antennas used for this transmitter must be installed to provide a separation distance of at least 125cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device is capable of 5, 10, 20, 40, and 80MHz bandwidths.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured, installed or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 6dDQO1NiV7oZtdMnmz1+Lw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Radwin Ltd.
27 Habarzel street
Tel Aviv, 6971039
Israel
  Date of Grant: 02/19/2015

Application Dated: 02/06/2015
 
Attention: Roni Barshan , RF Dept. Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q3K-5XACMOD
Name of Grantee:  Radwin Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 5GHz Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5157.0  -  5245.0 0.871  

Power Output listed is maximum combined Conducted power operating in a 2X2 MIMO configuration. The antennas used for this transmitter must be installed to provide a separation distance of at least 125cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device is capable of 5, 10, 20, 40, and 80MHz bandwidths.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured, installed or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 4DcHXpX5FusoPTnYnmqQCQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 10/29/2015

Application Dated: 10/22/2015
Radwin Ltd.
27 Habarzel street
Tel Aviv, 6971039
Israel
 
Attention: Shlomo Weiss , Standardization Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q3K-5XACMOD
Name of Grantee:  Radwin Ltd.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 5GHz Wireless Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 90Y 4942.5  -  4987.5 0.498 0.144  PM 5M00W7W
MO 90Y 4945.0  -  4985.0 0.551 0.144  PM 10M0W7W
MO 90Y 4950.0  -  4980.0 0.667 0.144  PM 20M0W7W

Power Output listed is maximum combined Conducted power operating in a 2X2 MIMO configuration. The antennas used for this transmitter must be installed to provide a separation distance of at least 125cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device is capable of 5, 10, and 20 MHz bandwidths.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 4DcHXpX5FusoPTnYnmqQCQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Radwin Ltd.
27 Habarzel street
Tel Aviv, 6971039
Israel
  Date of Grant: 10/29/2015

Application Dated: 10/22/2015
 
Attention: Shlomo Weiss , Standardization Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q3K-5XACMOD
Name of Grantee:  Radwin Ltd.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 5GHz Wireless Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 90Y 4942.5  -  4987.5 0.498 0.144  PM 5M00W7W
MO 90Y 4945.0  -  4985.0 0.551 0.144  PM 10M0W7W
MO 90Y 4950.0  -  4980.0 0.667 0.144  PM 20M0W7W

Power Output listed is maximum combined Conducted power operating in a 2X2 MIMO configuration. The antennas used for this transmitter must be installed to provide a separation distance of at least 125cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device is capable of 5, 10, and 20 MHz bandwidths.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 2t7fp63kgyOxYmXT4Uap4w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 11/24/2015

Application Dated: 11/20/2015
Radwin Ltd.
27 Habarzel street
Tel Aviv, 6971039
Israel
 
Attention: Shlomo Weiss , Standardization Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q3K-5XACMOD
Name of Grantee:  Radwin Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 5 GHz Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 MO 15E 5730.0  -  5845.0 0.98  

Class III Permissive Change. Power Output listed is maximum combined Conducted power operating in a 2X2 MIMO configuration. The antennas used for this transmitter must be installed to provide a separation distance of at least 313 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device is capable of 5, 10, 20, 40, and 80MHz bandwidths.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 2t7fp63kgyOxYmXT4Uap4w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Radwin Ltd.
27 Habarzel street
Tel Aviv, 6971039
Israel
  Date of Grant: 11/24/2015

Application Dated: 11/20/2015
 
Attention: Shlomo Weiss , Standardization Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q3K-5XACMOD
Name of Grantee:  Radwin Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 5 GHz Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 MO 15E 5730.0  -  5845.0 0.98  

Class III Permissive Change. Power Output listed is maximum combined Conducted power operating in a 2X2 MIMO configuration. The antennas used for this transmitter must be installed to provide a separation distance of at least 313 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device is capable of 5, 10, 20, 40, and 80MHz bandwidths.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 0MV7RwPdB/WJ8Uk9VJBZcA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 02/19/2015

Application Dated: 02/06/2015
Radwin Ltd.
27 Habarzel street
Tel Aviv, 6971039
Israel
 
Attention: Roni Barshan , RF Dept. Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q3K-5XACMOD
Name of Grantee:  Radwin Ltd.
Equipment Class: Digital Transmission System
Notes: 5 GHz Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 5730.0  -  5845.0 0.925  

Power Output listed is maximum combined Conducted power operating in a 2x2 MIMO configuration. The antennas used for this transmitter must be installed to provide a separation distance of at least 125cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device is capable of 5, 10, 20, 40, and 80MHz bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 0MV7RwPdB/WJ8Uk9VJBZcA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Radwin Ltd.
27 Habarzel street
Tel Aviv, 6971039
Israel
  Date of Grant: 02/19/2015

Application Dated: 02/06/2015
 
Attention: Roni Barshan , RF Dept. Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q3K-5XACMOD
Name of Grantee:  Radwin Ltd.
Equipment Class: Digital Transmission System
Notes: 5 GHz Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 5730.0  -  5845.0 0.925  

Power Output listed is maximum combined Conducted power operating in a 2x2 MIMO configuration. The antennas used for this transmitter must be installed to provide a separation distance of at least 125cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device is capable of 5, 10, 20, 40, and 80MHz bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 0jvdTi3p8cNf2AebV2314A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 10/22/2015

Application Dated: 10/21/2015
Radwin Ltd.
27 Habarzel street
Tel Aviv, 6971039
Israel
 
Attention: Shlomo Weiss , Standardization Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q3K-5XACMOD
Name of Grantee:  Radwin Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 5GHz Wireless Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5157.5  -  5245.0 0.871  
38 CC 15E 5253.5  -  5346.5 0.077  
38 CC 15E 5478.5  -  5721.5 0.079  

Power Output listed is maximum combined Conducted power operating in a 2X2 MIMO configuration. The antennas used for this transmitter must be installed to provide a separation distance of at least 125cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device is capable of 5, 10, 20, 40, and 80MHz bandwidths.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 0jvdTi3p8cNf2AebV2314A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Radwin Ltd.
27 Habarzel street
Tel Aviv, 6971039
Israel
  Date of Grant: 10/22/2015

Application Dated: 10/21/2015
 
Attention: Shlomo Weiss , Standardization Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q3K-5XACMOD
Name of Grantee:  Radwin Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 5GHz Wireless Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5157.5  -  5245.0 0.871  
38 CC 15E 5253.5  -  5346.5 0.077  
38 CC 15E 5478.5  -  5721.5 0.079  

Power Output listed is maximum combined Conducted power operating in a 2X2 MIMO configuration. The antennas used for this transmitter must be installed to provide a separation distance of at least 125cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device is capable of 5, 10, 20, 40, and 80MHz bandwidths.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: