FCC ID Q3K-BSA5XSDR

Smart Antenna Outdoor Radio Device

by Radwin Ltd.

Grantee Code: Q3K   Product Code: BSA5XSDR
Latest application date: 2015-10-16

FCC ID Device Details

FCC IDQ3K-BSA5XSDR
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQ3K
Product CodeBSA5XSDR
Applicant BusinessRadwin Ltd. 🇮🇱
Related Domains radwin.com
Equipment ClassSmart Antenna Outdoor Radio Device
Test FirmMicom Labs

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5259-5341 MHzClass III permissive change to software defined radio2015-10-16
5730-5845 MHzOriginal Equipment2015-05-08

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2015-10-16PDF 283.4 KB
ManualUsers Manual2015-05-08PDF 282.6 KB
IntInternal Photos2015-10-16PDF 756.4 KB
IntInternal Photos2015-05-08PDF 755.4 KB
ExtExternal Photos2015-10-16PDF 484.2 KB
ExtExternal Photos2015-05-08PDF 483.8 KB
Label and LocationID Label/Location Info2015-10-16PDF 363.1 KB
SetupTest Setup Photos2015-10-16PDF 249.1 KB
SetupTest Setup Photos2015-05-08PDF 497.5 KB
DFS Metadata onlyTest Report2015-10-16PDF 3.8 MB
DFS rBTest Report2015-10-16PDF 3.9 MB
NIITest Report2015-10-16PDF 4.7 MB
DTS ReportTest Report2015-05-08PDF 5.5 MB
AuthorizationCover Letter(s)2015-10-16PDF 42.6 KB
ConfidCover Letter(s)2015-10-16PDF 50 KB
AuthorizationCover Letter(s)2015-05-08PDF 39.4 KB
ConfidCover Letter(s)2015-05-08PDF 49.9 KB
SDR RequestCover Letter(s)2015-05-08PDF 36.5 KB
RFxRF Exposure Info2015-10-16PDF 129.5 KB
RFxRF Exposure Info2015-05-08PDF 135.4 KB
Block Metadata onlyBlock DiagramPDF 242 KB
Schema Metadata onlySchematicsPDF 1.2 MB
Antenna Spec Metadata onlyOperational DescriptionPDF 530.7 KB
Channelization Metadata onlyOperational DescriptionPDF 54.3 KB
Ops Metadata onlyOperational DescriptionPDF 208.3 KB
Ops Metadata onlyOperational DescriptionPDF 40.4 KB
Device Security Description Metadata onlySDR Software/Security InfPDF 422.8 KB
Restriction Configuration Control Attestation Metadata onlySDR Software/Security InfPDF 62.8 KB
SDR Class III Declaration Metadata onlySDR Software/Security InfPDF 129.7 KB
SDR Security Metadata onlySDR Software/Security InfPDF 1.1 MB
SDR Security Description Metadata onlySDR Software/Security InfPDF 1.1 MB
Software Configuration Control Metadata onlySDR Software/Security InfPDF 67.6 KB
Software Configuration Control Metadata onlySDR Software/Security InfPDF 323.3 KB
UNII Device Security Descruiption Metadata onlySDR Software/Security InfPDF 437.5 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 450.8 KB
Parts Metadata onlyParts List/Tune Up InfoPDF 450.8 KB

Application Information

Application IDwxR9XyJgs+uegJVBSCHMDg==
Final Action Date2015-10-16
Application PurposeClass III permissive change to software defined radio
Applicant FRN0008787137
ModelBSA5XSDR
Frequency Range5259-5341 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionSmart Antenna Outdoor Radio Device
Responsible PartyShlomo Weiss, Standardization Officer, shlomo@radwin.com , +97237662988
Technical ContactGordon Hurst, MiCOM Labs, certification@micomlabs.com , (925)4620304
Test FirmGordon Hurst, Micom Labs, gordon_hurst@micomlabs.com , 925-462-0304
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioYes
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsPower Output listed is peak conducted. Device is operating in a 2x2 and 3x3 Spatial Multiplexing MIMO configuration as described in this filing. This device, including its antenna(s), must be professionally installed as specified in this filing for meeting RF exposure compliance requirements. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 76 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 10 MHz, 20 MHz and 40 MHz bandwidth modes.

Applications

Application IDDatePurpose
wxR9XyJgs+uegJVBSCHMDg==2015-10-16Class III permissive change to software defined radio
CJivtH9hKPOJ9Id++S4K9Q==2015-05-08Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
5259-5341 MHz0.008615E20, 38, MO
5484-5711 MHz0.008915E20, 38, MO
5730-5845 MHz0.903000015C20

Grants

TCB Grant - Application wxR9XyJgs+uegJVBSCHMDg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 10/16/2015

Application Dated: 08/10/2015
Radwin Ltd.
27 Habarzel street
Tel Aviv, 6971039
Israel
 
Attention: Shlomo Weiss , Standardization Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q3K-BSA5XSDR
Name of Grantee:  Radwin Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Smart Antenna Outdoor Radio Device
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 38 MO 15E 5259.0  -  5341.0 0.0086  
20 38 MO 15E 5484.0  -  5711.0 0.0089  

Power Output listed is peak conducted. Device is operating in a 2x2 and 3x3 Spatial Multiplexing MIMO configuration as described in this filing. This device, including its antenna(s), must be professionally installed as specified in this filing for meeting RF exposure compliance requirements. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 76 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 10 MHz, 20 MHz and 40 MHz bandwidth modes.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application wxR9XyJgs+uegJVBSCHMDg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Radwin Ltd.
27 Habarzel street
Tel Aviv, 6971039
Israel
  Date of Grant: 10/16/2015

Application Dated: 08/10/2015
 
Attention: Shlomo Weiss , Standardization Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q3K-BSA5XSDR
Name of Grantee:  Radwin Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Smart Antenna Outdoor Radio Device
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 38 MO 15E 5259.0  -  5341.0 0.0086  
20 38 MO 15E 5484.0  -  5711.0 0.0089  

Power Output listed is peak conducted. Device is operating in a 2x2 and 3x3 Spatial Multiplexing MIMO configuration as described in this filing. This device, including its antenna(s), must be professionally installed as specified in this filing for meeting RF exposure compliance requirements. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 76 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 10 MHz, 20 MHz and 40 MHz bandwidth modes.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application CJivtH9hKPOJ9Id++S4K9Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 05/08/2015

Application Dated: 05/06/2015
Radwin Ltd.
27 Habarzel street
Tel Aviv, 6971039
Israel
 
Attention: Shlomo Weiss , Standardization Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q3K-BSA5XSDR
Name of Grantee:  Radwin Ltd.
Equipment Class: Digital Transmission System
Notes: Smart Antenna Outdoor Radio Device
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 15C 5730.0  -  5845.0 0.903  

Power output listed is peak conducted. Device is operating in a 2x2 and 3x3 Spatial Multiplexing MIMO configuration as described in this filing. This device, including its antenna(s), must be professionally installed as specified in this filing for meeting RF exposure compliance requirements. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 76 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode.

20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

EAS Grant - Application CJivtH9hKPOJ9Id++S4K9Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Radwin Ltd.
27 Habarzel street
Tel Aviv, 6971039
Israel
  Date of Grant: 05/08/2015

Application Dated: 05/06/2015
 
Attention: Shlomo Weiss , Standardization Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q3K-BSA5XSDR
Name of Grantee:  Radwin Ltd.
Equipment Class: Digital Transmission System
Notes: Smart Antenna Outdoor Radio Device
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 15C 5730.0  -  5845.0 0.903  

Power output listed is peak conducted. Device is operating in a 2x2 and 3x3 Spatial Multiplexing MIMO configuration as described in this filing. This device, including its antenna(s), must be professionally installed as specified in this filing for meeting RF exposure compliance requirements. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 76 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

Mail To: