FCC ID Q3KRW3XMOD
3.6GHz Radio Module for Base and Fixed
by Radwin Ltd.
Grantee Code: Q3K Product Code: RW3XMOD
Latest application date: 2013-11-07
FCC ID Device Details
| FCC ID | Q3KRW3XMOD |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | Q3K |
| Product Code | RW3XMOD |
| Applicant Business | Radwin Ltd. 🇮🇱 |
| Related Domains |  radwin.com |
| Equipment Class | 3.6GHz Radio Module for Base and Fixed |
| Test Firm | Israel Testing Laboratories |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 3652.5-3697.5 MHz | Original Equipment | 2013-11-07 |
| 3652.5-3697.5 MHz | Original Equipment | 2013-11-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2013-11-07 | PDF 378.6 KB |
| Int | Internal Photos | 2013-11-07 | PDF 344.8 KB |
| Ext | External Photos | 2013-11-07 | PDF 344.8 KB |
| Label and Location | ID Label/Location Info | 2013-11-07 | PDF 504.1 KB |
| Test Report | Test Report | 2013-11-07 | PDF 4.9 MB |
| Authorization | Cover Letter(s) | 2013-11-07 | PDF 50.4 KB |
| Confid | Cover Letter(s) | 2013-11-07 | PDF 37.6 KB |
| Modular Request | Cover Letter(s) | 2013-11-07 | PDF 479.6 KB |
| RFx | RF Exposure Info | 2013-11-07 | PDF 101.9 KB |
Application Information
| Application ID | 8oTZtaYPlUdmjGxIUoGlGw== |
|---|---|
| Final Action Date | 2013-11-07 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0008787137 |
| Model | RW3XMOD |
| Frequency Range | 3652.5-3697.5 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | 3.6GHz Radio Module for Base and Fixed |
| Responsible Party | Roni Barshan, RF Dept. Manager, Roni_b@radwin.com , +97237662968 |
| Technical Contact | William Graff, MiCOM Labs, certification@micomlabs.com  , (925)4620304 |
| Test Firm | IIan Cohen, Israel Testing Laboratories, sraz@itl.co.il  , 972-3-5339022 |
| TCB Email | certification@micomlabs.com |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Modular Approval. Power Output listed is the maximum combined conducted output power. Device is a 2x2 Spatial Multiplexing MIMO, as described within this filing. The antennas used for this transmitter shall be installed to provide a separation distance of at least 57 cm from allpersons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is assembled in enclosures manufactured and tested by RADWIN or its approved subcontractors and is instructed to ensure that the end user has no manual instructions to remove or install the device. Maximum EIRP: 5.012W (5M00W7W); 9.772W (10M0D7W); 20.094W (20M0D7W); 40.738W (40M0D7W) |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 8oTZtaYPlUdmjGxIUoGlGw== | 2013-11-07 | Original Equipment |
| 88zRmFpfWv41CzRF9Qanvg== | 2013-11-05 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application 8oTZtaYPlUdmjGxIUoGlGw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 11/07/2013 Application Dated: 11/06/2013 |
| Radwin Ltd. |
| 27 Habarzel street |
| Tel Aviv, 6971039 Israel |
| Attention: Roni Barshan , RF Dept. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q3KRW3XMOD |
| Name of Grantee: | Radwin Ltd. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | 3.6GHz Radio Module for Base and Fixed |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 90 | 3652.5 - 3697.5 | 0.24 | 3.5 PM | 5M00W7W |
| BC | 90 | 3655.0 - 3695.0 | 0.34 | 3.5 PM | 10M0W7W |
| BC | 90 | 3660.0 - 3690.0 | 0.3 | 3.5 PM | 20M0W7W |
| BC | 90 | 3670.0 - 3680.0 | 0.33 | 3.5 PM | 40M0W7W |
| Modular Approval. Power Output listed is the maximum combined conducted output power. Device is a 2x2 Spatial Multiplexing MIMO, as described within this filing. The antennas used for this transmitter shall be installed to provide a separation distance of at least 57 cm from allpersons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is assembled in enclosures manufactured and tested by RADWIN or its approved subcontractors and is instructed to ensure that the end user has no manual instructions to remove or install the device. Maximum EIRP: 5.012W (5M00W7W); 9.772W (10M0D7W); 20.094W (20M0D7W); 40.738W (40M0D7W) |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
EAS Grant - Application 8oTZtaYPlUdmjGxIUoGlGw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Radwin Ltd. 27 Habarzel street Tel Aviv, 6971039 Israel |
Date of Grant: 11/07/2013 Application Dated: 11/06/2013 |
| Attention: Roni Barshan , RF Dept. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q3KRW3XMOD |
| Name of Grantee: | Radwin Ltd. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | 3.6GHz Radio Module for Base and Fixed |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 90 | 3652.5 - 3697.5 | 0.24 | 3.5 PM | 5M00W7W |
| BC | 90 | 3655.0 - 3695.0 | 0.34 | 3.5 PM | 10M0W7W |
| BC | 90 | 3660.0 - 3690.0 | 0.3 | 3.5 PM | 20M0W7W |
| BC | 90 | 3670.0 - 3680.0 | 0.33 | 3.5 PM | 40M0W7W |
| Modular Approval. Power Output listed is the maximum combined conducted output power. Device is a 2x2 Spatial Multiplexing MIMO, as described within this filing. The antennas used for this transmitter shall be installed to provide a separation distance of at least 57 cm from allpersons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is assembled in enclosures manufactured and tested by RADWIN or its approved subcontractors and is instructed to ensure that the end user has no manual instructions to remove or install the device. Maximum EIRP: 5.012W (5M00W7W); 9.772W (10M0D7W); 20.094W (20M0D7W); 40.738W (40M0D7W) |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
| Mail To: |