FCC ID Q6G-AP330

Wireless Access Point

by WatchGuard Technologies, Inc.

Grantee Code: Q6G   Product Code: AP330
Latest application date: 2021-09-08

FCC ID Device Details

FCC IDQ6G-AP330
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQ6G
Product CodeAP330
Applicant BusinessWatchGuard Technologies, Inc. 🇺🇸
Related Domains watchguard.com
Equipment ClassWireless Access Point
Test FirmBureau Veritas CPS(H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-09-08
2402-2480 MHzOriginal Equipment2021-04-12
5180-5240 MHzOriginal Equipment2021-04-12

Exhibits

DocumentTypeAvailableFile
Users Manual revUsers Manual2021-04-12PDF 694 KB
Users manual revUsers Manual2021-04-12PDF 694 KB
Internal photos revInternal Photos2021-04-12PDF 1.5 MB
External photosExternal Photos2021-04-12PDF 446.5 KB
Label sample and label location revID Label/Location Info2021-04-12PDF 383.4 KB
Test setup photosTest Setup Photos2021-09-08PDF 758.6 KB
Test setup photosTest Setup Photos2021-04-12PDF 1.5 MB
Test Report revTest Report2021-09-08PDF 1.5 MB
Test report (DFS)Test Report2021-09-08PDF 3.4 MB
Test Report (DTS-BT LE) revTest Report2021-04-12PDF 852.6 KB
Test Report (DTS-Zigbee)Test Report2021-04-12PDF 640.4 KB
Test Report (NII)_revTest Report2021-04-12PDF 2 MB
Test report (DTS-WLAN) revTest Report2021-04-12PDF 3.6 MB
Attestation (DFS Master Declaration)Attestation Statements2021-09-08PDF 460.9 KB
Attestation (Channel and Mode Declaration)Attestation Statements2021-04-12PDF 87 KB
Agent AuthorizationCover Letter(s)2021-09-08PDF 435.5 KB
Confidentiality request(Long term)Cover Letter(s)2021-09-08PDF 290.3 KB
Description of Change revCover Letter(s)2021-09-08PDF 60.4 KB
Agent authorizationCover Letter(s)2021-04-12PDF 75.3 KB
Confidentiality requestCover Letter(s)2021-04-12PDF 97.4 KB
RF exposure info (MPE)RF Exposure Info2021-09-08PDF 182 KB
RF Exposure Info (MPE) revRF Exposure Info2021-04-12PDF 180.8 KB
Block diagram rev Metadata onlyBlock DiagramPDF 386 KB
Schematics-1 rev Metadata onlySchematicsPDF 4 MB
Schematics-2 rev Metadata onlySchematicsPDF 4.8 MB
Operational Description rev Metadata onlyOperational DescriptionPDF 240.7 KB
Operational Description rev2 Metadata onlyOperational DescriptionPDF 258.9 KB
Software Operational Description Metadata onlyOperational DescriptionPDF 161.9 KB
Software Operational Description_rev Metadata onlyOperational DescriptionPDF 403.7 KB

Application Information

Application IDYGGBWvQQL72H5gekSTHhKw==
Final Action Date2021-09-08
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0008960791
ModelAP330
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless Access Point
Responsible PartyJay Lindenauer, Vice President of Product Delivery Operations, jay.lindenauer@watchguard.com , 2068768103
AgentJenny Jenny Jenny, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, jenny.nien@bureauveritas.com , 886-3-3183232
Test FirmEric Lin, Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch, eric-wp.lin@tw.bureauveritas.com , +886-3-2641570
TCB Emailcertification@nacsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsClass II Permissive Change to add frequency bands 5.26-5.32GHz and 5.50-5.70GHz via software enabling as described in this filing. Power listed is maximum conducted output power. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 21 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device is restricted to indoor use only.

Applications

Application IDDatePurpose
YGGBWvQQL72H5gekSTHhKw==2021-09-08Class II permissive change or modification of presently authorized equipment
jv8s5AuIFx0V0SSrb2IEdQ==2021-04-12Original Equipment
hrxquuxbKLhMvylC49eYbw==2021-04-12Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.00315CCC
2405-2480 MHz0.00315CCC
2412-2462 MHz0.28815CCC, MO
5180-5240 MHz0.26615ECC, MO
5260-5320 MHz0.23715ECC, MO, ND
5500-5700 MHz0.23615ECC, MO, ND
5745-5825 MHz0.24615ECC, MO

Grants

TCB Grant - Application YGGBWvQQL72H5gekSTHhKw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  North American EMC Certification Services Inc
24889 Ferguson Ave
Maple Ridge, BC,
Canada
Date of Grant: 09/08/2021

Application Dated: 08/31/2021
WatchGuard Technologies, Inc.
505 Fifth Avenue South,
Suite 500
Seattle, WA 98104
 
Attention: Jay Lindenauer , Vice President of Product Delivery Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q6G-AP330
Name of Grantee:  WatchGuard Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.266  
CC MO ND 15E 5260.0  -  5320.0 0.237  
CC MO ND 15E 5500.0  -  5700.0 0.236  
CC MO 15E 5745.0  -  5825.0 0.246  

Class II Permissive Change to add frequency bands 5.26-5.32GHz and 5.50-5.70GHz via software enabling as described in this filing.

Power listed is maximum conducted output power. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 21 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device is restricted to indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application YGGBWvQQL72H5gekSTHhKw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

WatchGuard Technologies, Inc.
505 Fifth Avenue South, Suite 500
Seattle, WA 98104
United States
  Date of Grant: 09/08/2021

Application Dated: 08/31/2021
 
Attention: Jay Lindenauer , Vice President of Product Delivery Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q6G-AP330
Name of Grantee:  WatchGuard Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.266  
CC MO ND 15E 5260.0  -  5320.0 0.237  
CC MO ND 15E 5500.0  -  5700.0 0.236  
CC MO 15E 5745.0  -  5825.0 0.246  

Class II Permissive Change to add frequency bands 5.26-5.32GHz and 5.50-5.70GHz via software enabling as described in this filing.

Power listed is maximum conducted output power. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 21 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device is restricted to indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application jv8s5AuIFx0V0SSrb2IEdQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  North American EMC Certification Services Inc
24889 Ferguson Ave
Maple Ridge, BC,
Canada
Date of Grant: 04/12/2021

Application Dated: 04/11/2021
WatchGuard Technologies, Inc.
505 Fifth Avenue South,
Suite 500
Seattle, WA 98104
 
Attention: Jay Lindenauer , Vice President of Product Delivery Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q6G-AP330
Name of Grantee:  WatchGuard Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.288  
CC 15C 2402.0  -  2480.0 0.003  
CC 15C 2405.0  -  2480.0 0.003  

Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. The product must be installed such that its antenna(s) can provide a separation distance of at least 21 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application jv8s5AuIFx0V0SSrb2IEdQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

WatchGuard Technologies, Inc.
505 Fifth Avenue South, Suite 500
Seattle, WA 98104
United States
  Date of Grant: 04/12/2021

Application Dated: 04/11/2021
 
Attention: Jay Lindenauer , Vice President of Product Delivery Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q6G-AP330
Name of Grantee:  WatchGuard Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.288  
CC 15C 2402.0  -  2480.0 0.003  
CC 15C 2405.0  -  2480.0 0.003  

Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. The product must be installed such that its antenna(s) can provide a separation distance of at least 21 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application hrxquuxbKLhMvylC49eYbw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  North American EMC Certification Services Inc
24889 Ferguson Ave
Maple Ridge, BC,
Canada
Date of Grant: 04/12/2021

Application Dated: 04/11/2021
WatchGuard Technologies, Inc.
505 Fifth Avenue South,
Suite 500
Seattle, WA 98104
 
Attention: Jay Lindenauer , Vice President of Product Delivery Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q6G-AP330
Name of Grantee:  WatchGuard Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.266  
CC MO 15E 5745.0  -  5825.0 0.246  

Power listed is maximum conducted output power. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 21 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device is restricted to indoor use only.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application hrxquuxbKLhMvylC49eYbw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

WatchGuard Technologies, Inc.
505 Fifth Avenue South, Suite 500
Seattle, WA 98104
United States
  Date of Grant: 04/12/2021

Application Dated: 04/11/2021
 
Attention: Jay Lindenauer , Vice President of Product Delivery Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q6G-AP330
Name of Grantee:  WatchGuard Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.266  
CC MO 15E 5745.0  -  5825.0 0.246  

Power listed is maximum conducted output power. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 21 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device is restricted to indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: