FCC ID Q6G-PCE3302

Module

by WatchGuard Technologies, Inc.

Grantee Code: Q6G   Product Code: PCE3302
Latest application date: 2014-08-26

FCC ID Device Details

FCC IDQ6G-PCE3302
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQ6G
Product CodePCE3302
Applicant BusinessWatchGuard Technologies, Inc. 🇺🇸
Related Domains watchguard.com
Equipment ClassModule
Test FirmBureau Veritas CPS (H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2014-08-26
2412-2462 MHzOriginal Equipment2014-08-26

Exhibits

DocumentTypeAvailableFile
User Manual.pdfUsers Manual2014-08-26PDF 142.7 KB
Internal Photos.pdfInternal Photos2014-08-26PDF 354.9 KB
External Photos.pdfExternal Photos2014-08-26PDF 376.7 KB
Label Location.pdfID Label/Location Info2014-08-26PDF 76.7 KB
Label.pdfID Label/Location Info2014-08-26PDF 1.4 MB
Test Set Up Photo.pdfTest Setup Photos2014-08-26PDF 296.5 KB
Test Report (DTS).pdfTest Report2014-08-26PDF 863.8 KB
Test Report (NII).pdfTest Report2014-08-26PDF 464.9 KB
Attestation (Channel and Mode Declaration).pdfAttestation Statements2014-08-26PDF 28 KB
Confidentiality Request.pdfCover Letter(s)2014-08-26PDF 23 KB
Cover Letter (Agent Authorization).pdfCover Letter(s)2014-08-26PDF 15 KB
Cover Letter (Modular Approval Request).pdfCover Letter(s)2014-08-26PDF 44.9 KB
RF Exposure Info (MPE).pdfRF Exposure Info2014-08-26PDF 50.1 KB
Block Diagram.pdf Metadata onlyBlock DiagramPDF 11.2 KB
Schematics.pdf Metadata onlySchematicsPDF 94.2 KB
Operational Description (Hardware).pdf Metadata onlyOperational DescriptionPDF 37 KB
Operational Descripton (Software).pdf Metadata onlyOperational DescriptionPDF 46.6 KB

Application Information

Application IDBU9BTTb2UtNWlIs0ZHbcqA==
Final Action Date2014-08-26
Application PurposeOriginal Equipment
Applicant FRN0008960791
ModelPCE3302
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionModule
Responsible PartyJay Lindenauer, Vice President of Product Delivery Operations, jay.lindenauer@watchguard.com , 2068768103
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com , +886-3-2600884
TCB Emailcertification@curtis-straus.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

Applications

Application IDDatePurpose
BU9BTTb2UtNWlIs0ZHbcqA==2014-08-26Original Equipment
2WwwT0pLAzkYqysK8fxCIg==2014-08-26Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.744000015CCC, MO
5180-5240 MHz0.11215E38, CC, MO
5745-5825 MHz0.08615E38, CC, MO

Grants

TCB Grant - Application BU9BTTb2UtNWlIs0ZHbcqA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 08/26/2014

Application Dated: 08/26/2014
WatchGuard Technologies, Inc.
505 Fifth Avenue South,
Suite 500
Seattle, WA 98104
 
Attention: Jay Lindenauer , Vice President of Product Delivery Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q6G-PCE3302
Name of Grantee:  WatchGuard Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.112  
38 CC MO 15E 5745.0  -  5825.0 0.086  

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application BU9BTTb2UtNWlIs0ZHbcqA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

WatchGuard Technologies, Inc.
505 Fifth Avenue South, Suite 500
Seattle, WA 98104
United States
  Date of Grant: 08/26/2014

Application Dated: 08/26/2014
 
Attention: Jay Lindenauer , Vice President of Product Delivery Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q6G-PCE3302
Name of Grantee:  WatchGuard Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.112  
38 CC MO 15E 5745.0  -  5825.0 0.086  

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 2WwwT0pLAzkYqysK8fxCIg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 08/26/2014

Application Dated: 08/26/2014
WatchGuard Technologies, Inc.
505 Fifth Avenue South,
Suite 500
Seattle, WA 98104
 
Attention: Jay Lindenauer , Vice President of Product Delivery Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q6G-PCE3302
Name of Grantee:  WatchGuard Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.744  

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 2WwwT0pLAzkYqysK8fxCIg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

WatchGuard Technologies, Inc.
505 Fifth Avenue South, Suite 500
Seattle, WA 98104
United States
  Date of Grant: 08/26/2014

Application Dated: 08/26/2014
 
Attention: Jay Lindenauer , Vice President of Product Delivery Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q6G-PCE3302
Name of Grantee:  WatchGuard Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.744  

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: