Power Output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 1.0 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: HeadTCB Grant - Application bceJMog8aSv+XOW96mQbMQ==
| TCB |
GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
ACB, Inc.
6731 Whittier Avenue
Suite C110
McLean, VA 22101
|
Date of Grant: 12/06/2011
Application Dated: 12/06/2011
|
| ZTE Corporation |
| ZTE Plaza, Hi-tech Park, Nanshan District, |
Shenzhen, Guangdong, 518057 China |
| |
| Attention: Royce Wang , Product Certification Manager |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
Q78-ZTEN850 |
|
|
| Name of Grantee: |
ZTE Corporation |
|
|
| Equipment Class: |
Part 15 Spread Spectrum Transmitter |
| Notes: |
CDMA 1X-EVDO Digital Mobile Phone |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| CC |
15C |
2402.0
-
2480.0
|
0.0021
|
|
|
| Power Output listed is conducted. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device contains WLAN and CDMA transmitter(s). |
| CC: |
This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application bceJMog8aSv+XOW96mQbMQ==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
ZTE Corporation
ZTE Plaza, Hi-tech Park, Nanshan District,
Shenzhen, Guangdong, 518057
China
|
|
Date of Grant: 12/06/2011
Application Dated: 12/06/2011
|
| |
| Attention: Royce Wang , Product Certification Manager |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
Q78-ZTEN850 |
|
|
| Name of Grantee: |
ZTE Corporation |
|
|
| Equipment Class: |
Part 15 Spread Spectrum Transmitter |
| Notes: |
CDMA 1X-EVDO Digital Mobile Phone |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| CC |
15C |
2402.0
-
2480.0
|
0.0021
|
|
|
| Power Output listed is conducted. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device contains WLAN and CDMA transmitter(s). |
| CC: |
This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
|
|
|
|
|
TCB Grant - Application 6XDIE4WhAImSMW9V5VCwqg==
| TCB |
GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
ACB, Inc.
6731 Whittier Avenue
Suite C110
McLean, VA 22101
|
Date of Grant: 12/06/2011
Application Dated: 12/06/2011
|
| ZTE Corporation |
| ZTE Plaza, Hi-tech Park, Nanshan District, |
Shenzhen, Guangdong, 518057 China |
| |
| Attention: Royce Wang , Product Certification Manager |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
Q78-ZTEN850 |
|
|
| Name of Grantee: |
ZTE Corporation |
|
|
| Equipment Class: |
PCS Licensed Transmitter held to ear |
| Notes: |
CDMA 1X-EVDO Digital Mobile Phone |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| HC |
22H |
824.7
-
848.31
|
0.1603
|
0.1
PM
|
1M23F9W
|
| HC |
24E |
1851.25
-
1908.75
|
0.3606
|
0.1
PM
|
1M23F9W
|
| HC |
90 |
817.9
-
823.1
|
0.1233
|
0.1
PM
|
1M23F9W
|
| Power Output is ERP for Part 22 and Part 90 and EIRP for Part 24 . Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 1.0 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The he highest reported SAR values for head and body-worn accessory are 1.14 W/kg and 1.19 W/kg, respectively. Simultaneous transmission SAR value is: 1.24 W/kg. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.
This device contains Bluetooth and WLAN transmitters.
HAC Rating: M4/T4-2007 |
| HC: |
This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
EAS Grant - Application 6XDIE4WhAImSMW9V5VCwqg==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
ZTE Corporation
ZTE Plaza, Hi-tech Park, Nanshan District,
Shenzhen, Guangdong, 518057
China
|
|
Date of Grant: 12/06/2011
Application Dated: 12/06/2011
|
| |
| Attention: Royce Wang , Product Certification Manager |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
Q78-ZTEN850 |
|
|
| Name of Grantee: |
ZTE Corporation |
|
|
| Equipment Class: |
PCS Licensed Transmitter held to ear |
| Notes: |
CDMA 1X-EVDO Digital Mobile Phone |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| HC |
22H |
824.7
-
848.31
|
0.1603
|
0.1
PM
|
1M23F9W
|
| HC |
24E |
1851.25
-
1908.75
|
0.3606
|
0.1
PM
|
1M23F9W
|
| HC |
90 |
817.9
-
823.1
|
0.1233
|
0.1
PM
|
1M23F9W
|
| Power Output is ERP for Part 22 and Part 90 and EIRP for Part 24 . Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 1.0 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The he highest reported SAR values for head and body-worn accessory are 1.14 W/kg and 1.19 W/kg, respectively. Simultaneous transmission SAR value is: 1.24 W/kg. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.
This device contains Bluetooth and WLAN transmitters.
HAC Rating: M4/T4-2007 |
| HC: |
This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
|