FCC ID Q87-RE6800

WiFi repeater

by LINKSYS LLC

Grantee Code: Q87   Product Code: RE6800
Latest application date: 2016-12-15

Device Images

FCC ID Device Details

FCC IDQ87-RE6800
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQ87
Product CodeRE6800
Applicant BusinessLINKSYS LLC 🇺🇸
Related Domains belkin.com newbtl.com
Equipment ClassWiFi repeater
Test FirmBTL Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: Q87-RE7000 Grant Date: 04/14/20162016-12-15
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: Q87-RE7000 Grant Date: 04/14/20162016-12-15

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2016-12-15PDF 1.8 MB
External PhotosExternal Photos2016-12-15PDF 127.5 KB
ID Label/Location InfoID Label/Location Info2016-12-15PDF 466.3 KB
Declaration of authorizationCover Letter(s)2016-12-15PDF 217.3 KB
Request for Change in FCC IDCover Letter(s)2016-12-15PDF 252.5 KB

Application Information

Application IDcq0YYWzxZUV6UtTKq3iFEg==
Final Action Date2016-12-15
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: Q87-RE7000 Grant Date: 04/14/2016
Applicant FRN0009100470
ModelRE6800
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWiFi repeater
Responsible PartyPo-Wen Cheng, Regulatory Compliance Manager, Po-Wen.Cheng@Belkin.com , 949-238-4518
AgentCathy Cathy Cathy, BTL Inc., cathy@newbtl.com , 886-2-2657-3299
Technical ContactSteven Lu, BTL Inc., cathy@newbtl.com , 886-2-2657-3299
Non-Technical ContactCathy Wang, BTL Inc., cathy@newbtl.com , 886-2-2657-3299
Test FirmAndy Chiu, BTL Inc., Andy@newbtl.com , 886-2-26573299
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.

Applications

Application IDDatePurpose
cq0YYWzxZUV6UtTKq3iFEg==2016-12-15Change in identification of presently authorized equipment. Original FCC ID: Q87-RE7000 Grant Date: 04/14/2016
HddUfx+wFPNWYOhn0oSbSg==2016-12-15Change in identification of presently authorized equipment. Original FCC ID: Q87-RE7000 Grant Date: 04/14/2016

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.400000015CCC
5180-5240 MHz0.2615E38, CC, MO
5745-5825 MHz0.3715E38, CC, MO

Grants

TCB Grant - Application HddUfx+wFPNWYOhn0oSbSg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 12/15/2016

Application Dated: 12/15/2016
LINKSYS LLC
121 Theory Drive
Irvine, CA 92617
 
Attention: Po-Wen Cheng , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q87-RE6800
Name of Grantee:  LINKSYS LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.26  
38 CC MO 15E 5745.0  -  5825.0 0.37  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in 5150-5250 MHz band is for indoor use only.

This device has a 20/40/80 MHz bandwidth mode. The 80 MHz mode is limited to channel at 5210MHz, and 5775 MHz.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application HddUfx+wFPNWYOhn0oSbSg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LINKSYS LLC
121 Theory Drive
Irvine, CA 92617
United States
  Date of Grant: 12/15/2016

Application Dated: 12/15/2016
 
Attention: Po-Wen Cheng , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q87-RE6800
Name of Grantee:  LINKSYS LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.26  
38 CC MO 15E 5745.0  -  5825.0 0.37  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in 5150-5250 MHz band is for indoor use only.

This device has a 20/40/80 MHz bandwidth mode. The 80 MHz mode is limited to channel at 5210MHz, and 5775 MHz.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application cq0YYWzxZUV6UtTKq3iFEg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 12/15/2016

Application Dated: 12/14/2016
LINKSYS LLC
121 Theory Drive
Irvine, CA 92617
 
Attention: Po-Wen Cheng , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q87-RE6800
Name of Grantee:  LINKSYS LLC
Equipment Class: Digital Transmission System
Notes: WiFi repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.4  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application cq0YYWzxZUV6UtTKq3iFEg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LINKSYS LLC
121 Theory Drive
Irvine, CA 92617
United States
  Date of Grant: 12/15/2016

Application Dated: 12/14/2016
 
Attention: Po-Wen Cheng , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q87-RE6800
Name of Grantee:  LINKSYS LLC
Equipment Class: Digital Transmission System
Notes: WiFi repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.4  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: