FCC ID Q87-WAG54GV2M
WLAN 802.11g MiniPCI Card
by LINKSYS LLC
Grantee Code: Q87 Product Code: WAG54GV2M
Latest application date: 2005-03-11
FCC ID Device Details
| FCC ID | Q87-WAG54GV2M |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | Q87 |
| Product Code | WAG54GV2M |
| Applicant Business | LINKSYS LLC 🇺🇸 |
| Related Domains |  belkin.com |
| Equipment Class | WLAN 802.11g MiniPCI Card |
| Test Firm | Advance Data Tech. Corp. Hsin Chu EMC |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-03-11 |
| 2412-2462 MHz | Original Equipment | 2004-03-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2004-03-24 | PDF 697.9 KB |
| Internal Photos | Internal Photos | 2005-03-11 | PDF 204.5 KB |
| Internal Photos | Internal Photos | 2004-03-24 | PDF 670.2 KB |
| External Photos | External Photos | 2005-03-11 | PDF 308.4 KB |
| External Photos | External Photos | 2004-03-24 | PDF 72.7 KB |
| Label Location | ID Label/Location Info | 2004-03-24 | PDF 92.5 KB |
| Label Sample | ID Label/Location Info | 2004-03-24 | PDF 61.4 KB |
| Description | Operational Description | 2004-03-24 | PDF 47.1 KB |
| Test Setup Photos | Test Setup Photos | 2005-03-11 | PDF 228.3 KB |
| Test Setup Photos | Test Setup Photos | 2004-03-24 | PDF 271.9 KB |
| Test Report | Test Report | 2005-03-11 | PDF 1.3 MB |
| Test Report | Test Report | 2004-03-24 | PDF 3.6 MB |
| Description of Change | Cover Letter(s) | 2005-03-11 | PDF 54.6 KB |
| Confidentiality | Cover Letter(s) | 2004-03-24 | PDF 476.7 KB |
| DoC | Cover Letter(s) | 2004-03-24 | PDF 618.1 KB |
| Modular Approval Letter | Cover Letter(s) | 2004-03-24 | PDF 55.6 KB |
| POA | Cover Letter(s) | 2004-03-24 | PDF 489.7 KB |
| RF Exposure | RF Exposure Info | 2005-03-11 | PDF 97.5 KB |
| RF Exposure Info | RF Exposure Info | 2004-03-24 | PDF 90.7 KB |
| Block Diagram Metadata only | Block Diagram | PDF 13.7 KB | |
| Schematics Metadata only | Schematics | PDF 106.3 KB |
Application Information
| Application ID | d87n5hmTfB1rxE/CNxezTQ== |
|---|---|
| Final Action Date | 2005-03-11 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0009100470 |
| Model | WAG54GV2M |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WLAN 802.11g MiniPCI Card |
| Responsible Party | Po-Wen Cheng, Regulatory Compliance Manager, Po-Wen.Cheng@Belkin.com , 949-238-4518 |
| Agent | Eric Eric Eric, Advance Data Technology Corporation, eric_lin@adt.com.tw  , 886-3-593-5343 |
| Technical Contact | Eric Lin, Advance Data Technology Corporation, eric_lin@adt.com.tw , 886-3-593-5343 |
| Test Firm | Stephen Chen, Advance Data Tech. Corp. Hsin Chu EMC, stephen@mail.adt.com.tw  , 8862602180 |
| TCB Email | info@ckccertification.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change to add antenna as documented in this filing. Modular Approval. Power output listed is conducted. The module must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this and the original filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| d87n5hmTfB1rxE/CNxezTQ== | 2005-03-11 | Class II permissive change or modification of presently authorized equipment |
| AW/urOaJPgZZwMQms6q7Lw== | 2004-03-24 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application d87n5hmTfB1rxE/CNxezTQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 03/11/2005 Application Dated: 03/11/2005 |
| LINKSYS LLC |
| 121 Theory Drive |
| Irvine, CA 92617 |
| Attention: Po-Wen Cheng , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q87-WAG54GV2M |
| Name of Grantee: | LINKSYS LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN 802.11g MiniPCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.056 |
| Class II permissive change to add antenna as documented in this filing. Modular Approval. Power output listed is conducted. The module must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this and the original filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application d87n5hmTfB1rxE/CNxezTQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LINKSYS LLC 121 Theory Drive Irvine, CA 92617 United States |
Date of Grant: 03/11/2005 Application Dated: 03/11/2005 |
| Attention: Po-Wen Cheng , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q87-WAG54GV2M |
| Name of Grantee: | LINKSYS LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN 802.11g MiniPCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.056 |
| Class II permissive change to add antenna as documented in this filing. Modular Approval. Power output listed is conducted. The module must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this and the original filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/24/2004 Application Dated: 03/24/2004 |
| LINKSYS LLC |
| 121 Theory Drive |
| Irvine, CA 92617 |
| Attention: Po-Wen Cheng , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q87-WAG54GV2M |
| Name of Grantee: | LINKSYS LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN 802.11g MiniPCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.056 |
| Modular Approval. Power output listed is conducted. The module must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this and the original filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application AW/urOaJPgZZwMQms6q7Lw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LINKSYS LLC 121 Theory Drive Irvine, CA 92617 United States |
Date of Grant: 03/24/2004 Application Dated: 03/24/2004 |
| Attention: Po-Wen Cheng , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q87-WAG54GV2M |
| Name of Grantee: | LINKSYS LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN 802.11g MiniPCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.056 |
| Modular Approval. Power output listed is conducted. The module must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this and the original filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: |